Middle Atlantic C332LG Sngl Disp Mtunv - C3-32-LD1U

Middle Atlantic C3-32-LD1U Single Display Credenza Mount

Overview

The Middle Atlantic C3-32-LD1U is a single-display upright mount designed specifically for the 32 Inch C3 Credenza base series. If you're building a Middle Atlantic command center or AV console and need to elevate one large-format display — anything from a 40-inch briefing monitor up to a 98-inch video wall panel — this is the purpose-matched hardware. At 52.5 inches tall with height adjustment built in, it positions screens at comfortable operator sight lines without requiring a separate riser or custom fab work. The C3-32-LD1U (often searched as C3 32 LD1U) ships with mounting hardware included, so you're not hunting for fasteners on installation day.

Key Features

• Supported Display Range 40–98 Inches: The mount accommodates panels across the full commercial display spectrum — from standard 55-inch briefing room monitors to 98-inch ultra-wide presentation screens. That range means you can spec the display independently and still have a confirmed-fit mount, rather than sizing the display around mounting constraints.
• 150-lb Weight Capacity: Commercial large-format displays at the 75–98-inch range frequently push 80–120 lbs depending on panel construction. The 150-lb capacity of this mount provides real headroom for heavy professional-grade panels, including those with integrated compute modules or thick bezels that add mass.
• 52.5-Inch Height with Adjustment: Fixed-height mounts often result in sub-optimal viewing angles once you account for furniture height, operator seating, and sight-line angles. The height-adjustable design on the C3-32-LD1U lets installers dial in exact eye-level positioning without shimming or improvising. The 52.5-inch column height is matched to C3 Credenza ergonomics.
• Steel Construction: The all-steel build isn't just a durability point — it's a stability point. Large displays generate significant leverage forces on their mounts, especially when bumped or during cable management activity. Steel at this application scale resists flex that could cause display tilt or drift over time.
• 2.9-Inch Depth Profile: At just 2.9 inches deep (7.4 cm), the mount keeps the overall footprint of the credenza assembly tight. In control rooms or security operations centers where console rows are closely spaced, this matters for operator clearance and cable routing behind the display column.
• Mounting Hardware Included: The C3-32-LD1U ships with all required mounting hardware, reducing procurement steps and eliminating the risk of hardware mismatches from third-party fastener kits.
• Single Display Configuration: This is a dedicated single-display mount — not a dual-arm adapter. If your design calls for two screens on one credenza station, that's a different model selection. For single-screen operator positions in video surveillance control rooms, dispatch centers, or AV presentation environments, the single-display format keeps cable management clean and avoids the added weight of a dual-display arm on a credenza that may not be spec'd for it.
• C3 Credenza Series Compatibility: This mount is purpose-built for the 32 Inch C3 Credenza base. It integrates with the C3 system's mounting interface rather than using generic VESA or pole-clamp approaches, which means structural alignment is engineered rather than improvised.

Integration & Compatibility

The C3-32-LD1U integrates exclusively with the Middle Atlantic 32 Inch C3 Credenza base series. If you're specifying a display mount for a different credenza width or a different furniture line, verify the base series match before ordering — the mounting interface is system-specific. Display compatibility spans 40–98 inches with a maximum panel weight of 150 lbs; confirm your panel's published weight (including any OPS module) is within that limit. The black finish is standard; coordinate with the credenza base color spec on your project drawings. For multi-display console rows, Middle Atlantic offers companion credenza accessories for dual-display configurations on compatible base units.

Frequently Asked Questions

Q: What credenza base is the C3-32-LD1U designed to work with?

A: The C3-32-LD1U is purpose-built for the Middle Atlantic 32 Inch C3 Credenza base series. It uses a system-specific mounting interface and is not designed for other credenza widths or third-party furniture systems.

Q: What is the maximum display size this mount can support?

A: The C3-32-LD1U supports displays from 40 to 98 inches. The 150-lb weight capacity accommodates most commercial panels in that range, but confirm your specific panel's published weight before specifying.

Q: Is the mount height adjustable?

A: Yes. The C3-32-LD1U is height adjustable, allowing installers to set the display at the correct operator sight-line height. The column reaches 52.5 inches tall.

Q: Does the C3-32-LD1U ship with mounting hardware?

A: Yes, mounting hardware is included in the package.

Q: Can the C3-32-LD1U support two displays?

A: No. This model is a single-display mount. For dual-display configurations, a different Middle Atlantic model in the C3 accessory line would be required.

Q: What material is the mount constructed from?

A: The C3-32-LD1U is constructed from steel and finished in black.

Jerry Tildsen

The C3-32-LD1U is a straightforward but well-engineered piece of kit for anyone building out a C3 Credenza console station. The spec that gets overlooked most often is the 150-lb weight capacity — at 98 inches, commercial displays from major panel manufacturers can push 90–110 lbs before you add any OPS compute module or mounting adapter. This mount actually has room for that, which a lot of lighter-duty credenza risers do not.

Technical Highlights:

• 150-lb Rated Capacity: Covers the weight range of commercial 75–98-inch panels including those with integrated OPS modules — no need to de-rate your display selection to fit the mount spec.
• Height-Adjustable 52.5-Inch Column: Eliminates the guesswork of fixed-height columns; installers can set exact eye-level positioning for seated or standing operator positions rather than shimming after the fact.
• 2.9-Inch Depth: Keeps the credenza footprint compact — important in control rooms where console rows are laid out on 36–48-inch centers and rear cable access is already tight.

Deployment Considerations:

• Verify the C3 Credenza base you're mounting to is the 32-inch width variant — this mount's interface is system-specific and won't align correctly on narrower or wider C3 base units.
• The mount is rated for a single display only; attempting to adapt a dual-arm bracket onto this column is outside the design envelope and will void any structural ratings.

This mount earns its place in security operations center builds and dispatch console installations where a single large-format display (75–98 inches) needs to sit cleanly at eye level on a C3 Credenza station without improvised hardware or structural uncertainty.