Middle Atlantic C3 FRAME4 BAY32/HV2 - C3-FF32-4

Middle Atlantic C3-FF32-4 C3 Series 4-Bay Credenza Frame

The Middle Atlantic C3-FF32-4 is a steel credenza frame built for permanent AV and security control room installations where structural integrity and long-term equipment support matter more than short-term convenience. At 93.5 inches wide across four bays and 32 inches tall, this frame forms the backbone of a floor-standing credenza system — the kind of infrastructure that houses operator consoles, NVR racks, DSP equipment, and AV processors in broadcast, command-and-control, and enterprise security environments. It ships from the USA and carries TAA compliance, which matters for government and federal procurement workflows.

Key Features

• Four-Bay Configuration (93.5" W × 32" H × 3.5" D): The four-bay layout gives integrators a wide, modular footprint to distribute equipment loads across separate compartments — preventing the thermal and cable management problems that come from stuffing everything into a single bay. At 93.5 inches wide, this frame suits operator stations where multiple monitors sit above the credenza and equipment lives below.
• 400 lb Weight Capacity: A 400 lb rated load means you can fill this frame with dense equipment — heavy NVRs, UPS units, amplifiers, or stacked patch bays — without stressing the structure. Most credenza frames in this class are rated 200–300 lbs; the 400 lb rating is a meaningful margin for mixed-use control room builds where load distribution is uneven.
• 3.5-Inch Frame Depth: The 3.5 in frame depth is the structural shell only — interior bay depth is determined by the panels and enclosures you configure into the system. This shallow frame profile keeps the overall credenza footprint manageable in rooms where operator sightlines and walkway clearance are constraints.
• Steel Construction: Cold-rolled steel provides the dimensional stability required when equipment is mounted, cabled, and regularly accessed over years of operation. Unlike aluminum-frame alternatives, steel resists flex under asymmetric loading — relevant when one bay holds a 60 lb UPS and the adjacent bay is mostly cable management.
• 32-Inch Working Height: At 32 inches, the C3-FF32-4 sits at a standard ADA-adjacent working height for seated operators — comfortable for console work without requiring a custom riser. This height also aligns with common monitor arm mounting heights when the frame is paired with overhead equipment rails.
• Mounting Hardware Included: The frame ships with mounting hardware, reducing the screw-hunting that slows installations on large credenza builds. For integrators assembling multiple bays on a deadline, having hardware in the box matters.
• TAA Compliant, Made in USA: Federal Ops Country of Origin is confirmed USA, and the C3-FF32-4 carries TAA compliance. This is non-negotiable for government end-users, court systems, DOD integrators, and any project with a Buy American provision in the contract.
• International Availability: Available internationally, which matters for enterprise and government integrators deploying consistent standards across multi-site global installations.

Integration and Compatibility

The C3-FF32-4 is part of Middle Atlantic's Middle Atlantic C3 Series credenza line, a modular system designed so frames, worksurfaces, pedestals, and cable management components combine into complete operator furniture builds. The four-bay frame accepts Middle Atlantic's standard C3 Series panels, doors, and accessories — allowing integrators to mix open-bay equipment zones with enclosed storage compartments in the same run.

This frame pairs naturally with rack enclosures and rack accessories — Middle Atlantic rack sections can be integrated into individual bays to provide standard EIA 19-inch rack mounting within the credenza footprint. That combination is common in security operations centers where NVRs, video wall controllers, and KVM switches need rack-mount hardware but must live at operator desk height rather than in a separate equipment rack room.

For AV and security integrators specifying AV furniture and control room infrastructure, the C3 Series is a known commodity in the government and enterprise market. The TAA compliance status of the C3-FF32-4 (often searched as C3 FF32 4) makes it directly spec-able on GSA schedule projects without additional compliance documentation. Coordinate with your power conditioning and surge protection spec early — the 400 lb capacity gives you room to include quality UPS hardware in the credenza build rather than relegating it to a floor-mounted unit.

Frequently Asked Questions

Q: Is the Middle Atlantic C3-FF32-4 TAA compliant?

A: Yes. The C3-FF32-4 is TAA compliant and manufactured in the USA (Federal Ops Country of Origin: USA), making it eligible for government and federal procurement projects with Buy American or TAA requirements.

Q: What is the weight capacity of the C3-FF32-4?

A: The C3-FF32-4 is rated for a 400 lb load capacity, providing substantial margin for credenza builds that include heavy equipment such as NVRs, UPS units, and dense AV processors across the four bays.

Q: What are the overall dimensions of the C3-FF32-4?

A: The frame measures 93.5 inches wide × 32 inches tall × 3.5 inches deep (237.5 cm × 81.3 cm × 8.9 cm). The 3.5-inch depth figure refers to the frame itself; finished bay depth depends on the panels and enclosures configured into the system.

Q: Does the C3-FF32-4 include mounting hardware?

A: Yes, mounting hardware is included with the frame.

Q: How many bays does the C3-FF32-4 have?

A: The C3-FF32-4 has four bays, spanning 93.5 inches total width. This configuration suits wide operator console builds where multiple equipment zones and display areas are required side by side.

Q: What material is the C3-FF32-4 frame constructed from?

A: The frame is constructed from steel, finished in black, providing the structural rigidity needed for permanent credenza installations under sustained equipment loading.

James Everett

The C3-FF32-4 is one of those line items that integrators either spec correctly on the first pass or re-order after the walkthroughs expose the mistake. The 93.5-inch four-bay footprint is purpose-built for wide-format operator console configurations — think security operations centers, dispatch consoles, or broadcast control rooms where the credenza run has to carry NVRs, KVM switches, UPS hardware, and local storage all in a single continuous surface. The 400 lb weight capacity is the number I keep coming back to: most competing frames in this form factor cap at 250–300 lbs, and once you start loading real security hardware across four bays, that margin disappears faster than you'd expect.

Technical Highlights:

• 400 lb Load Capacity: At 400 lbs distributed across four bays, this frame handles full-density builds — dual NVRs, a mid-size UPS, amplifiers, and patch management — without the flex you see in lighter-gauge competitors. For a 4-bay run, that works out to 100 lbs per bay average, which is realistic for security/AV mixed deployments.
• TAA Compliance + USA Origin: Federal Ops Country of Origin is confirmed USA. For any government project hitting a TAA or Buy American clause, this is box-checked at the spec stage — no documentation chase at closeout. The C3-FF32-4 is a clean spec for GSA, DOD, and state/local government builds.
• 32-Inch Height: The 32-inch working height is the right call for seated operator environments. It aligns with ergonomic guidelines for console work and pairs cleanly with standard monitor arm mounting heights — you won't need a custom riser to hit the right display elevation.

Deployment Considerations:

• The 3.5-inch frame depth is the structural shell only — plan your bay depth around the Middle Atlantic C3 Series panels and enclosures you're integrating, not the frame dimension. Misreading that spec is the most common RFI I see on first-time C3 builds.
• Shipping weight is 136 lbs against a 50.1 lb product weight — the packaging is substantial. Factor receiving dock access and two-person lift requirements into your site logistics, especially on elevator-served floors or raised-floor data center builds.

For a government security operations center or a multi-operator dispatch console where TAA compliance is mandatory and equipment density is high, the C3-FF32-4 is the correct frame to spec. It's not the right call for a single-operator desktop build or a temporary installation — this is permanent infrastructure.