Middle Atlantic C3 FRAME1 BAY24 HV2 - C3-FF24-1

Middle Atlantic C3-FF24-1 Single-Bay 24-Inch Credenza Frame

The Middle Atlantic C3-FF24-1 is a single-bay, 24-inch-tall steel credenza frame designed as the structural foundation of the C3 Series modular furniture system. If you're building out an operations center, security console, or AV control room and need a low-profile equipment housing that presents cleanly in a finished space — rather than a standard open rack — this frame is the starting point. At 22.8 in wide and only 3.5 in deep, it mounts flush and accepts C3 Series modules to create a custom credenza layout without custom fabrication lead times.

Key Features

• 100 lb Weight Capacity: At 45.4 kg rated load, this steel frame handles populated equipment bays with real gear installed — not just decorative panels. For integrators loading it with AV receivers, managed switches, or security appliances, the structural margin is there. Don't confuse the 11.3 lb frame weight with the load rating; you have nearly 9× the frame's own weight in usable capacity.
• Steel Construction: The all-steel body holds its shape under load and resists the racking forces that come with wall-mounted or pedestal-based credenza builds. Powder-coat black finish integrates with standard rack furniture without requiring color-matched filler panels.
• 24-Inch Height, 22.8-Inch Width: These dimensions correspond to the C3 Series modular grid. The 24 in height (61 cm) accommodates standard credenza-depth equipment, and the 22.8 in (57.9 cm) width is the per-bay module dimension — critical to know before ordering additional bays or door kits, since the overall credenza width scales with bay count.
• 3.5-Inch Depth Profile: At 8.9 cm deep, the C3-FF24-1 frame itself is shallow — the finished credenza depth is determined by the modules and worksurface added to it, not this structural frame. Verify your target equipment depth against the full C3 Series build specifications before populating the bay.
• TAA Compliant, USA Origin: Built in the USA and TAA-compliant — relevant for federal, state, and municipal deployments subject to the Trade Agreements Act. Country of origin is documented as USA for both federal procurement and GSA schedule orders. If your project has Buy American Act or TAA clauses, this frame qualifies without requiring a waiver.
• Mounting Hardware Included: The frame ships with mounting hardware, which reduces trip-to-the-hardware-store delays on install day. Exact fastener count and type are not itemized in available documentation, so verify against the physical kit before starting the rough-in.
• Single-Bay Configuration: One bay per unit. For wider credenza runs — common in NOC, SOC, or boardroom installs — order additional C3 frames and join them. The modular approach means you size the run to the room rather than adapting to a fixed-width enclosure.
• Available Internationally: Flagged as available for international shipping, which matters for multi-site enterprise deployments or integrators supplying projects outside the continental US.

Integration & Compatibility

The C3-FF24-1 is the structural bay frame of the Middle Atlantic C3 Series credenza line — it does not function as a standalone finished product. You build on it by adding C3-compatible door kits, worksurfaces, side panels, and equipment rails sourced from the same family. Before specifying this frame in a project BOM, confirm that all finish, door-style, and module components are pulled from the C3 Series to ensure dimensional compatibility.

For integrators deploying rack enclosures and furniture in control rooms or operations centers, the C3 system pairs with Middle Atlantic rack rails, cable management, and power distribution accessories. None of those accessories are included with the C3-FF24-1 itself — the frame is the structural shell only.

TAA compliance makes this frame compatible with government and public-sector security infrastructure procurement requirements. Federal buyers should confirm the TAA status with their contracting officer and reference the UPC (656747390050) and country of origin (USA) in procurement documentation.

If your project also requires active electronics — managed switches, NVRs, or UPS units — review the power and surge protection options that mount within C3 bays to plan the full credenza build before committing to bay count.

Frequently Asked Questions

Q: Is the Middle Atlantic C3-FF24-1 TAA compliant?

A: Yes. The C3-FF24-1 is TAA compliant and manufactured in the USA, making it eligible for federal, state, and municipal procurement under Trade Agreements Act requirements.

Q: What is the weight capacity of the C3-FF24-1?

A: The C3-FF24-1 is rated for 100 lbs (45.4 kg) of equipment load. The frame itself weighs 11.3 lbs (5.1 kg).

Q: How wide is the C3-FF24-1 bay?

A: The frame is 22.8 inches (57.9 cm) wide. This is the per-bay module dimension for the C3 Series. Multi-bay credenza runs require additional C3 frames joined together.

Q: Does the C3-FF24-1 ship with mounting hardware?

A: Yes, mounting hardware is included. Exact fastener specifications are not itemized in the available manufacturer documentation — verify the hardware kit contents upon receipt before starting installation.

Q: What is the frame depth of the C3-FF24-1?

A: The structural frame depth is 3.5 inches (8.9 cm). The finished credenza depth depends on the C3 Series modules and worksurface components added to the frame — not the frame dimension alone.

Q: Can the C3-FF24-1 be used on international projects?

A: Yes. Middle Atlantic lists the C3-FF24-1 as available internationally, making it suitable for multi-site enterprise or government deployments outside the continental US.

Eden Phillips

The C3-FF24-1 (often searched as C3 FF24 1) is the structural core of any C3 Series credenza build — a 22.8-inch-wide, 24-inch-tall steel bay frame rated to 100 lbs that gives integrators a modular, furniture-grade starting point without the lead times and cost of custom millwork. The 3.5-inch frame depth means the real design variable is what you stack onto it, not the frame itself.

Technical Highlights:

• 100 lb Load Rating: At 45.4 kg capacity, this frame handles populated equipment bays including managed switches, compact NVRs, or UPS units — not just decorative panels. The 11.3 lb frame weight versus 100 lb capacity gives integrators meaningful headroom when planning equipment layouts.
• TAA Compliant, USA-Made: Federal and state procurements with TAA or Buy American requirements are covered without a waiver. Country of origin is documented as USA — reference UPC 656747390050 in procurement documentation.
• Modular Single-Bay Design: One frame = one 22.8-inch bay. Multi-bay runs scale linearly by joining frames — which means you can spec the credenza width to the room rather than forcing a fixed-width enclosure into an awkward space.

Deployment Considerations:

• The C3-FF24-1 frame is the structural shell only — door kits, worksurfaces, side panels, equipment rails, and power distribution are all separate C3 Series line items. Build out the full BOM before ordering to avoid a second shipment mid-install.
• The 3.5-inch frame depth is not the finished credenza depth. Confirm your target equipment depth against the full C3 Series dimensional specs before populating the bay, particularly for deeper appliances like edge servers or large UPS units.

The C3-FF24-1 is a natural fit for security operations center (SOC) or network operations center (NOC) builds where the credenza needs to look finished in a client-facing space while housing real equipment — and where TAA compliance is a procurement requirement, not an afterthought.