Panduit HC2YL10 FiberRunner 2x2 Hinged Snap-On Channel Cover, 10 ft, Yellow

Overview

The Panduit HC2YL10 is a 10-foot hinged snap-on cover designed exclusively for the Panduit FiberRunner 2x2 fiber routing channel. In data center and telecom central office environments, maintaining access to fiber runs without pulling covers entirely off the tray is a recurring operational need — this cover addresses that directly. It snaps onto the FiberRunner channel from either side, opens up to 90° for hands-on cable work, and removes completely when the job requires full-clearance access. Yellow color provides immediate visual identification of fiber runs, a practical detail in dense cable environments where color-coding by media type is standard practice.

The HC2YL10 is sold as a single 10-foot piece (package quantity 1), making it straightforward to order exactly the linear footage your run requires. Carton quantity is 20 pieces for bulk project procurement.

Key Features

• Hinged Snap-On Design: The cover clips directly onto the FiberRunner 2x2 channel without tools — no screws, no hardware. In practice this means a technician can pop the cover open, work on the fiber, and re-secure in seconds. When you're maintaining a live rack with dozens of fiber runs, that time compounds quickly.
• 90° Open Angle, Both Sides: The hinge allows the cover to swing open from either the left or right side of the channel, up to a full 90°. This matters in dense cabinet rows where one side of the tray may be obstructed — you're not locked into a single swing direction.
• Full Removal Capability: Beyond opening 90°, the cover can be completely detached when full-clearance access is needed for initial cable dressing or major moves. Reinstalls with the same snap-on motion.
• Yellow PVC Construction, UL-94V-0 Rated: The yellow color serves as a color-code identifier for fiber media in structured cabling environments. PVC with a UL-94V-0 flammability rating means the material self-extinguishes — a baseline requirement in data center and telecom buildouts where fire rating is non-negotiable for plenum or equipment room installations.
• 10-Foot Length (3.05m), Exact-Fit Profile: At 2.29 inches wide and 0.44 inches tall, this cover is dimensioned to match the FiberRunner 2x2 channel tray exactly. Ordering in 10-foot sections lets you plan linear footage without cutting waste into your cable management budget.
• RoHS Compliant: Meets RoHS requirements, which matters for enterprise and government procurement programs with restricted substance compliance mandates.
• UL Listed (2024) for Fiber Cable Routing Assemblies: Listed under UL 2024 specifically for fiber cable routing assemblies — not a generic listing. This distinction is relevant when your installation requires listed components end-to-end for the authority having jurisdiction (AHJ) sign-off.
• NEBS Level 4 / Telcordia GR-63-CORE Compliant: Meets the relevant test requirements in Telcordia GR-63-CORE and qualifies at NEBS Level 4 — the environmental and seismic standard for network equipment in carrier-grade central office deployments. If you're installing in a telecom CO or carrier facility, this compliance may be a hard procurement requirement.

Integration & Compatibility

The HC2YL10 is engineered specifically for the FiberRunner fiber cable management channel system. It fits the 2x2 (2-inch width) FiberRunner tray profile — confirm your channel tray model matches this size before ordering. It does not fit FiberRunner 4x4 or other width variants. The snap-on hinge interface is proprietary to the FiberRunner system, so this cover is not interchangeable with third-party channel trays.

For data center structured cabling projects, the FiberRunner system integrates naturally alongside Panduit patch panels and horizontal cable managers. Yellow is one of several available cover colors in the FiberRunner line, allowing color-coded routing schemes by fiber type, zone, or priority — plan your color convention before ordering in bulk. If your project uses cable management solutions from multiple manufacturers, verify tray dimensions before assuming interchangeability.

What's in the Box

• 1x Panduit HC2YL10 FiberRunner 2x2 hinged snap-on channel cover, 10 ft, yellow

Frequently Asked Questions

Q: What channel tray does the HC2YL10 fit?

A: The HC2YL10 is designed for the Panduit FiberRunner 2x2 (2-inch wide) fiber routing channel. It does not fit FiberRunner 4x4 or other width variants — confirm your tray model is the 2x2 size before ordering.

Q: Can the HC2YL10 cover be opened from either side of the channel?

A: Yes. The hinged design allows the cover to open up to 90° from either side of the channel, and it can be fully removed when complete access is needed.

Q: What is the flammability rating of the HC2YL10?

A: The HC2YL10 is rated UL-94V-0, meaning the PVC material self-extinguishes. It is also UL Listed under UL 2024 for fiber cable routing assemblies.

Q: Is the HC2YL10 compliant for carrier/telecom central office installations?

A: Yes. The HC2YL10 meets the relevant test requirements in Telcordia GR-63-CORE and qualifies at NEBS Level 4, which is the environmental and seismic compliance level required for carrier-grade central office deployments.

Q: Is the HC2YL10 RoHS compliant?

A: Yes, the HC2YL10 is RoHS compliant, meeting restricted substance requirements for enterprise and government procurement programs.

Q: How many pieces come per carton for bulk orders?

A: Each order unit (package quantity 1) is a single 10-foot cover. Carton quantity is 20 pieces for bulk project procurement.

Marty Allison

The HC2YL10 is the cover component most installers forget to spec until they're mid-project and need to close out a FiberRunner 2x2 run. At 10 feet per piece and a snap-on hinge that opens 90° in either direction, it's engineered for the reality of data center fiber management — where you need to get back in without a full teardown, and where the cover dimensions (2.29 inches wide, 0.44 inches tall) have to match the tray exactly or nothing snaps together.

Technical Highlights:

• UL-94V-0 Flammability: Self-extinguishing PVC is a baseline requirement in equipment rooms and data halls — not optional. This rating is baked into the material, not a coating that degrades over time.
• NEBS Level 4 / GR-63-CORE: If you're working in a carrier CO or any facility that mandates Telcordia GR-63-CORE compliance, this cover qualifies. Not all channel covers in this size class carry that certification — it's worth confirming before substituting a lower-cost alternative on a carrier project.
• UL 2024 Listed for Fiber Routing Assemblies: This is a component-level listing specific to fiber cable routing, which matters when your AHJ requires listed assemblies throughout. A generic raceway listing won't satisfy this requirement on a fiber-specific installation.

Deployment Considerations:

• The snap-on fit is specific to the FiberRunner 2x2 tray — measure your existing channel width before ordering. The 2.29-inch cover width means it won't seat correctly on a 4x4 tray, and there's no field modification that fixes a size mismatch.
• Yellow is a color-code, not just an aesthetic choice. If your site hasn't established a fiber color convention yet, lock that down before ordering bulk covers — retrofitting a different color mid-project means re-labeling or re-ordering, neither of which is fast.

For a telecom central office or carrier-grade data center buildout where NEBS Level 4 and UL 2024 compliance are hard requirements, the HC2YL10 is the correct cover spec for FiberRunner 2x2 runs — not a substitutable commodity item.