Panduit HS2X2YL10NM FiberRunner 2x2 Horizontal Fiber Routing Channel

Overview

The Panduit HS2X2YL10NM is a 10-foot section of FiberRunner® 2" x 2" horizontal fiber routing channel designed for data centers and telecommunications central offices where clean, compliant fiber cable management is non-negotiable. Built from UL-94V-0 rated PVC in high-visibility yellow, this channel mounts via a hinged drop-in cover system and connects end-to-end using Panduit's QuikLock™ coupler — keeping installation fast and the cable pathway organized without fishing cables through enclosed conduit. If you're building out or extending a fiber cable management infrastructure in a dense equipment room, the HS2X2YL10NM delivers a standards-backed, tool-friendly solution for horizontal fiber runs.

Key Features

• 2" x 2" (55.1mm x 48.8mm) Interior Channel: The 2x2 cross-section handles moderate-density horizontal fiber runs without the bulk of larger 4" systems. Right-sized for inter-rack backbone segments or structured cabling trunks — enough room to maintain bend radius compliance without over-provisioning channel real estate.
• 10-Foot (3.05m) Section Length: Standard 10 ft lengths minimize splice points across typical rack-to-rack spans. Fewer couplers means fewer potential misalignment points and faster installation across long horizontal runs.
• Hinged Drop-In Cover (QuikLock™ Compatible): The snap-on cover design means you can route cables after the channel is mounted — no need to thread fiber before securing the tray. QuikLock™ couplers lock adjacent sections and fittings without tools, cutting down on installation time on high-density cable trays.
• UL-94V-0 Flammability Rating: Meets the UL 94 V-0 standard for self-extinguishing plastics — the channel will not sustain flame propagation. Required in data center builds where fire-spread ratings are part of local code or insurance compliance, and where the NEC or local AHJ mandates plenum or equivalent-rated pathways.
• UL Listed per 2024 for Fiber Cable Routing Assemblies: Carries current UL listing specifically for fiber optic cable routing — not a generic electrical conduit listing. This distinction matters when your commissioning inspector or colocation operator asks for documentation on fiber pathway compliance.
• NEBS Level 3 / Telcordia GR-63-CORE Compliant: Tested to NEBS Level 3 seismic and environmental requirements per Telcordia GR-63-CORE. If your deployment is in a carrier-grade central office, exchange facility, or any infrastructure that must pass NEBS qualification, this channel is already pre-qualified — you're not guessing at compliance.
• RoHS Compliant PVC Construction: Hazardous substance restrictions met for global deployments. If equipment is destined for EU facilities or customers with environmental procurement policies, RoHS compliance on every component including cable management is increasingly required at the BOM level.
• High-Visibility Yellow Color: Yellow is the standard color convention for single-mode fiber pathways in many data center color-coding schemes. Using HS2X2YL10NM in yellow channels makes fiber infrastructure immediately identifiable during moves, adds, and changes — reducing the risk of accidental disconnects during unrelated work.
• FiberRunner® System Integration: Part of Panduit's Panduit FiberRunner system — a full ecosystem of channels, fittings, covers, and mounting hardware engineered to work together. System-native fittings (elbows, tees, crosses) maintain bend radius at every turn without custom fabrication or field-bent conduit.

Integration & Compatibility

The HS2X2YL10NM is designed exclusively for use within the fiber routing channel systems product family. QuikLock™ couplers and all 2x2 FiberRunner fittings — 90° elbows, tee branches, reducers — connect directly to this channel section. The hinged cover is ordered separately and snaps into place after fiber is routed; the open-top channel design makes it compatible with field-terminated and pre-terminated trunk assemblies alike. Mounting hardware (brackets, hangers, and wall-mount accessories) specific to the FiberRunner 2x2 system attach directly to the channel body. This channel is not interchangeable with 2x4 or 4x4 FiberRunner sections — verify your fitting sizes before ordering mixed-density runs. For installations requiring a complete data center cable infrastructure build-out, plan fittings and cover sections alongside channel quantities to avoid delays.

What's in the Box

• 1x Panduit HS2X2YL10NM FiberRunner 2x2 Channel Section, 10 ft, Yellow (cover not included)

Frequently Asked Questions

Q: Is the HS2X2YL10NM cover included, or does it need to be ordered separately?

A: The cover is not included with the HS2X2YL10NM channel section. The drop-in hinged cover must be ordered separately as part of the FiberRunner 2x2 accessory system. This is standard for the FiberRunner product line — channel and cover are separate line items.

Q: What flammability rating does the HS2X2YL10NM carry?

A: The HS2X2YL10NM is rated UL-94V-0, meaning the PVC material is self-extinguishing and will not propagate flame. It is also UL Listed per the 2024 standard for fiber cable routing assemblies.

Q: Is the HS2X2YL10NM compliant with NEBS requirements?

A: Yes. The HS2X2YL10NM meets the requirements for relevant tests in Telcordia GR-63-CORE and NEBS (Network Equipment Building Systems) Level 3, making it suitable for carrier-grade central office and telecom facility deployments.

Q: What are the actual interior dimensions of the HS2X2YL10NM channel?

A: The overall width is 2.169 inches (55.1mm) and the overall height is 1.92 inches (48.8mm). The nominal