Ubiquiti products
-
Save $0.01
Ubiquiti UACC-UPLINK-SFP28-30M Direct attach cable, 30 meters
25G SFP28 direct attach cable, 30m for UniFi switches
- Supports 1G, 10G, and 25G with auto-negotiation — no recabling when upgrading switches.
- 30-meter passive DAC eliminates transceivers and media converters, reducing failure points.
- Terminates directly into SFP28 ports on UniFi switches — no additional adapters required.
In stock · Ships same business day Free shipping over $499Add to quote$79.00 $78.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-UPLINK-SFP28-0.15M 25G SFP28 Direct Attach Cable
0.15m SFP28 direct attach cable for 25G UniFi switch uplinks
- Runs at 1G, 10G, or 25G with auto-negotiation—no manual speed configuration needed.
- SFP28-to-SFP28 DAC eliminates transceivers, reducing failure points in tight cabinet builds.
- 0.15m length targets stacked-switch or switch-to-gateway uplinks within the same rack.
In stock · Ships same business day Free shipping over $499Add to quote$29.00 $28.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-UK-ULTRA-TS Swiss Army Knife Table Stand
Tabletop stand for Swiss Army Knife Ultra lab and staging use
- Enables drill-free tabletop deployment of Swiss Army Knife Ultra in lab or staging.
- Compact 92.7 x 41.8 x 58.8 mm, 98 g form fits easily in a field deployment kit.
- Multi-material enclosure (PC, PBT, POM, TPE) resists impact on uneven work surfaces.
In stock · Ships same business day Free shipping over $499Add to quote$15.00 $14.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-UCG-INDUSTRIAL-RM Rack mount for Cloud Gateway
1U rack mount for Ubiquiti Cloud Gateway Industrial deployments
- Toolless 1U install via dual release buttons — no screwdrivers or hex keys required.
- Polycarbonate and galvanized steel housing rated -30 to 50 °C for harsh edge environments.
- Purpose-built for Ubiquiti Cloud Gateway Industrial; incompatible with other appliances.
In stock · Ships same business day Free shipping over $499Add to quote$69.00 $68.99 Save $0.01 -
Save $0.01
Ubiquiti U7 Pro XG Wall Mount - UACC-U7-PRO-XG-WALL-TS
Tabletop stand for U7 Pro XG Wall access points—temp testing and deployments
- Polycarbonate, aluminum alloy, and silicone rubber build damps vibration on bench surfaces.
- Compact 181.9 × 83.8 × 77.5 mm footprint suits lab benches, closets, and staging areas.
- Exclusively fits the U7 Pro XG Wall AP—verify model before ordering to avoid mismatches.
In stock · Ships same business day Free shipping over $499Add to quote$39.00 $38.99 Save $0.01 -
Save $0.01
Ubiquiti U7 Pro Wall Mount Stand - UACC-U7-PRO-WALL-TS
Aluminum tabletop stand for U7 Pro Wall access points
- Aluminum enclosure at 222 g enables tool-free repositioning during site surveys.
- 92.1 × 80 mm base fits rack shelves and standard office furniture without overhang.
- Paintable finish allows stand to match facility aesthetics without additional prep.
In stock · Ships same business day Free shipping over $499Add to quote$39.00 $38.99 Save $0.01 -
Ubiquiti UACC-RACK-SHELF-TL shelf acc for non-rack-mountable
Fixed shelf for non-rack equipment in Ubiquiti Toolless Mini Rack
- Mounts non-rack-mountable devices up to 20 kg (44 lb) in Toolless Mini Rack.
- Cold-rolled carbon steel (SPCC) with liquid coating resists corrosion indoors.
- 453.8 × 460 × 27.4 mm fixed shelf installs without tools or custom brackets.
In stock · Ships same business day Free shipping over $499Add to quote$93.99Add to quote$93.99 -
Ubiquiti UACC-RACK-SHELF-CLV 1U fixed cantilever mount shelf
1U cantilever shelf for non-rackmount gear in 19-inch racks
- Fits any standard 19-inch EIA rack using M6 bolts or cage nuts—no proprietary hardware.
- Cold-rolled carbon steel (SPCC) construction supports up to 20 kg (44 lb) of equipment.
- 1U profile at 481.4 × 250 × 44 mm preserves rack depth in shallow cabinet deployments.
In stock · Ships same business day Free shipping over $499Add to quote$93.99Add to quote$93.99 -
Ubiquiti UACC-RACK-PANEL-BLANK-2U Rack mount 2U blank panel
2U blank panel for 19-inch racks, airflow and cable management
- Fills 2U of unused rack space, blocking air bypass paths that degrade cooling.
- Fits any standard 19-inch rack without power or cabling — purely mechanical install.
- SPCC cold-rolled steel with gray finish blends into mixed-equipment network cabinets.
In stock · Ships same business day Free shipping over $499Add to quote$54.99Add to quote$54.99 -
Ubiquiti UACC-RACK-PANEL-BRUSH-1U Rack mount 1U brush panel
1U rack brush panel for 19-inch EIA cable management
- 1U form factor fits standard 19-inch EIA racks, minimizing vertical space consumption.
- Cold-rolled carbon steel and aluminum alloy construction provides durable long-term support.
- Brush panel design routes cables cleanly while maintaining rack airflow and organization.
In stock · Ships same business day Free shipping over $499Add to quote$73.99Add to quote$73.99 -
Ubiquiti UACC-RACK-PANEL-BLANK-1U Rack Mount OCD Panels
1U blanking panel for 19-inch racks with cable management
- Fills unused 1U slots in standard 19-inch racks to maintain proper airflow.
- Cold-rolled carbon steel construction resists bending under stacked equipment loads.
- Mounts with standard 10-32 or M5 screws—no special tools or hardware required.
In stock · Ships same business day Free shipping over $499Add to quote$34.99Add to quote$34.99 -
Save $0.01
Ubiquiti UACC-RACK-EAR-1U 1U Rack Mount Ears
1U rack mount ears for UniFi appliances on 19-inch EIA rails
- Mounts 1U UniFi appliances flush in any standard 19-inch EIA rack or wall rail.
- Drop-in replacement fits worn or damaged ears—no configuration or firmware needed.
- Weighs 0.1 lb, adding negligible load to rack weight calculations during planning.
In stock · Ships same business day Free shipping over $499Add to quote$9.00 $8.99 Save $0.01 -
Ubiquiti UACC-RACK-12U-WALL-SW-P Fully assembled wall-mount
12U wall-mount rack, fully assembled, built-in cooling for UniFi/UISP
- Ships fully assembled, eliminating on-site build time for integrators.
- Supports up to 100 kg (220 lbs) load capacity for dense rack deployments.
- Built-in cooling fans and perforated panels maintain airflow in tight spaces.
In stock · Ships same business day Free shipping over $499Add to quote$538.99Add to quote$538.99 -
Ubiquiti UACC-PSU-27V-250W 250W AC/DC Power Supply
250W 27V DC supply with hot-swap design for UISP Power Pro
- Hot-swap design allows live PSU replacement with zero service interruption.
- Operates from -20 to 50°C and up to 5,000 m altitude for harsh deployments.
- CE, FCC, IC certified and NDAA compliant for government and critical infrastructure use.
In stock · Ships same business day Free shipping over $499Add to quote$245.99Add to quote$245.99 -
Save $0.01
Ubiquiti UACC-PRO-MAX-16-RM rack-mount accessory
1U rack mount for UniFi Pro Max 16 switch integration
- 1U, 19-inch rack-compatible enclosure fits standard 4-post and 2-post racks.
- SGCC steel and polycarbonate construction provides rigid support at 1.1 kg total.
- Purpose-built for UniFi Pro Max 16 only; verify model before ordering.
In stock · Ships same business day Free shipping over $499Add to quote$49.00 $48.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-POE+-2.5G adapter that powers UniFi PoE+ devices
PoE+ adapter with 2.5G for UniFi devices, offloads switch power
- Offloads PoE+ power delivery from your switch, preserving switch power budget.
- 2.5G Ethernet port prevents backhaul bottlenecks in multi-gigabit UniFi deployments.
- 802.3at PoE+ output supports access points, cameras, and other UniFi PoE+ devices.
In stock · Ships same business day Free shipping over $499Add to quote$19.00 $18.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-POE+++-10G adapter that powers UniFi PoE+++
10G PoE+++ adapter for UniFi devices with remote power injection
- Injects PoE+++ power independently, freeing switch PoE budget for other devices.
- 10G LAN port prevents backhaul bottlenecks on multi-gigabit network cores.
- Plug-and-play AC-powered adapter; no configuration required in UniFi environments.
In stock · Ships same business day Free shipping over $499Add to quote$49.00 $48.99 Save $0.01 -
Ubiquiti UACC-OFC-S2-LULU-10M Lightweight fiber patch cable
10M single-mode fiber patch cable, SC/APC connectors, 100G capable
- Supports up to 100G throughput for high-density backbone and datacenter links.
- 10-meter length suits rack-to-rack and patch panel runs in network closets.
- Lightweight build reduces mechanical strain on connectors across dense fiber plants.
In stock · Ships same business day Free shipping over $499Add to quote$23.99Add to quote$23.99 -
Save $0.01
Ubiquiti UACC-OFC-S2-LULU-0.5M-50 Fiber Patch Cable
50-pack LC duplex fiber cables, 0.5M, rated to 100G
- Supports 100G throughput, keeping pace with high-density datacenter uplinks.
- 0.5M length minimizes cable clutter for short-run patching in equipment racks.
- 50-pack quantity reduces per-port cost and simplifies large-scale fiber deployments.
In stock · Ships same business day Free shipping over $499Add to quote$169.00 $168.99 Save $0.01 -
Save $0.01
Ubiquiti UACC-OFC-MA-MPMP-0.5M OM4 Fiber Patch Cable
0.5M OM4 MPO-12 fiber patch cable for 100G data center backbones
- OM4 multi-mode fiber delivers full 100G throughput for dense switch interconnects.
- 0.5 m length minimizes rack slack and eliminates field termination labor.
- MPO-12 Type B UPC connectors integrate with 100G optical line cards and breakout modules.
In stock · Ships same business day Free shipping over $499Add to quote$45.00 $44.99 Save $0.01