Posiflex

Posiflex · 21835127010

Posiflex 21835127010 Fan Cpu W/ Heat Sink For TP8000-P4

N OEM fan and CPU heat sink assembly designed specifically for the TP8000-P4 POS terminal

• OEM fan and heat sink assembly restores original cooling in TP8000-P4 terminals.
• Prevents CPU throttling during extended POS operations in retail or hospitality.
• Exclusive TP8000-P4 fit avoids costly full-terminal replacement on thermal failures.

Posiflex · 21834004120

Posiflex 21834004120 Fan Cpu For TP5800

Replacement CPU cooling fan designed for the Posiflex TP5800 terminal platform

• CPU cooling fan replacement for Posiflex TP5800 terminals
• Maintains thermal stability during continuous POS operation
• Prevents thermal throttling and unplanned downtime

Posiflex · 21815156219

Posiflex 21815156219 Inverter LCD G150XG03V3 PLCD2815201AB

When your POS terminal display fails, downtime costs you and your client money

• OEM-matched inverter restores G150XG03V3 backlight without flicker or artifacts.
• Direct board swap avoids full display assembly replacement, cutting service time.
• Factory-spec voltage conversion prevents premature CCFL panel failure in continuous use.

Posiflex · 21815156212

Posiflex 21815156212 Inverter LCD For XG03 REV.2 TP58/80

When your Posiflex XG03 REV.2 terminal experiences display failures or backlight issues, system downtime hits revenue and customer experience hard

• OEM inverter board restores CCFL backlight on TP58 and TP80 panels without reconfiguration.
• Direct drop-in PCB assembly eliminates wiring guesswork and reduces field repair time.
• Factory-matched component maintains original display specs, avoiding full terminal replacement cost.

Posiflex · 21811156204

Posiflex 21811156204 Panel LCD Tft 15" Au (G150XG03V3)18B/24B

15-inch LCD TFT panel assembly (G150XG03V3 chipset) designed as a replacement or upgrade module for Posiflex point-of-sale terminals and kiosk systems

• 15-inch TFT LCD panel suits countertop and wall-mounted POS deployments.
• G150XG03V3 chipset ensures direct compatibility with specified Posiflex terminals.
• Modular design allows field replacement to restore degraded display performance.

Posiflex · 21119800900

Posiflex 21119800900 Memory 8G DDR3 16MHZ 204P 135V/1.5 V3

When your POS terminals or embedded security workstations start choking on simultaneous video streams, transaction logs, and peripheral management

• 8GB DDR3 SODIMM handles concurrent video streams, POS software, and peripheral drivers.
• 204-pin SO-DIMM fits space-constrained terminals where full-size DIMMs are not an option.
• Dual 1.35V/1.5V support ensures drop-in compatibility across standard and low-power platforms.

Posiflex · 21118100601

Posiflex 21118100601 KS6215 Memory Upgrade 1GB Sodim DDR2 Mem

• Expands Posiflex KS6215 series RAM to 1GB via DDR2 SO-DIMM slot.
• SO-DIMM form factor ensures a direct drop-in fit with no case modification.
• Manufacturer-matched upgrade eliminates compatibility guesswork at deployment.

Posiflex · 21116512402

Posiflex 21116512402 KS6115/KS6315 Memory Upgrade 512MB Sodim

When POS terminals start lagging during transaction processing or multi-application environments, insufficient RAM is often the bottleneck

• 512MB SODIMM memory upgrade for KS6115/KS6315 terminals
• Factory-validated compatibility for Posiflex POS systems
• Drop-in installation extends terminal usable life

Posiflex · 21116000401-US

Posiflex 21116000401-Us KS6115/KS6315 Memory Upgrade 1GB Sodim

When your Posiflex KS6115 or KS6315 POS terminal starts bottlenecking on transaction processing or struggling with multi-application environments

• OEM-specified 1GB SODIMM targets KS6115/KS6315 directly, eliminating compatibility guesswork.
• 1600 MHz SO-DIMM form factor fits compact POS chassis without terminal replacement or downtime.
• Resolves RAM-constrained transaction slowdowns in multi-app retail and hospitality deployments.

Posiflex · 21112048404-US

Posiflex 21112048404-Us KS62/66/68/73/TP83U Memory Upgrade 2GB

• 2GB DDR2 SO-DIMM module extends RAM capacity on compatible Posiflex POS terminals.
• SO-DIMM form factor enables straightforward field installation without specialty tooling.
• Verified compatibility with Posiflex KS62, KS66, KS68, KS73, and TP83U platforms.

Posiflex · 20863237210

Posiflex 20863237210 Interface Cable For PD2200

When you're deploying Posiflex PD2200 series displays in retail POS environments or customer-facing kiosks, cable compatibility isn't optional—it's

• Purpose-built for PD2200 displays, guaranteeing pinout compatibility out of the box.
• Shielded PVC-jacketed copper conductor maintains signal integrity in noisy POS environments.
• Proprietary connector housing with strain relief withstands repeated flex cycles at connection points.

Posiflex · 20862033400

Posiflex 20862033400 Cable 7 Wire Touch Panel Extension TP58

7-wire extension cable designed to connect TP58 touch panel systems where the standard cable run is insufficient

• 7-wire configuration preserves all TP58 signal paths across extended cable runs.
• Engineered specifically for Posiflex TP58 systems, ensuring verified connector compatibility.
• Solves controller-to-panel separation needs in POS, warehouse, and industrial deployments.

Posiflex · 20833200000

Posiflex 20833200000 Fan Exhaust W/ Cable TP5800/TP8000

Replacement exhaust fan assembly designed to manage thermal load in point-of-sale and hospitality terminal deployments

• Replacement exhaust fan assembly restores active cooling in TP5800 and TP8000 terminals.
• Integrated cable harness eliminates separate wiring—installs directly to internal fan connector.
• Correct airflow orientation prevents hot-air recirculation and thermal throttling at the CPU.

Posiflex · 20111024201

Posiflex 20111024201 1GB Dimm Type DDR1 Jiva 8000 Memory Upgr

1GB DDR1 DIMM memory module engineered as a drop-in upgrade for Posiflex Jiva 8000 point-of-sale and surveillance systems

• Adds 1GB DDR1 RAM to Posiflex Jiva 8000 terminals, boosting concurrent process capacity.
• Drop-in DIMM module installs without system replacement, minimizing POS downtime.
• Exclusive Jiva 8000 compatibility — verify DDR1 slot availability before ordering.

Posiflex · 19360335013

Posiflex 19360335013 Stopper Paper Roller Blk PP7

Replacement stopper paper roller (black) designed for the Posiflex PP7 thermal printer

• Direct OEM replacement for PP7 thermal printers — no modification required.
• Black polypropylene construction withstands repeated thermal environment exposure.
• Maintains paper feed tension and alignment, preventing skew in high-volume deployments.

Posiflex · 19260121010

Posiflex 19260121010 Plate Lock Gear CR6310 V.2

Cash drawer failures in high-volume POS environments typically trace back to mechanical wear in the locking mechanism

• Direct-fit OEM replacement restores secure lock engagement in CR6310 V.2 drawers.
• Zinc-plated steel construction matches original tolerances for reliable gear mesh.
• Targets primary wear failure point, reducing service calls in high-cycle POS sites.

Posiflex · 19260119010

Posiflex 19260119010 Lock Gear Plate For Cr-6300

When a Posiflex CR-6300 cash drawer's lock mechanism fails or shows signs of wear, replacing the entire drawer unit creates unnecessary downtime and

• OEM zinc-plated steel gear plate restores CR-6300 lock function without full drawer swap.
• Factory-spec fit eliminates alignment guesswork and ensures correct lock engagement/release.
• Targeted part-level repair cuts POS downtime versus replacing an otherwise functional drawer.

Posiflex · 19260106020

Posiflex 19260106020 Lock Cover Bracket For Cr-6310

Lock cover bracket designed specifically for the Posiflex CR-6310 system

• Designed exclusively for the CR-6310 chassis, ensuring precise fit and secure cover retention.
• Tamper-resistant bracket secures the cover assembly, supporting physical security in retail deployments.
• Factory-finished and requires no additional surface treatment, reducing installation prep time.

Posiflex · 19210314023

Posiflex 19210314023 Kit Bill(4)/Coin(6) Separ Bk CR31 V.2

Bill and coin separator kit designed for the CR31 V.2 payment terminal

• Sorts 4 bill denominations and 6 coin types into separate bins, reducing manual reconciliation.
• Mechanical operation requires no electrical connection, simplifying installation and reducing failure points.
• Engineered exclusively for CR31 V.2 enclosures; incompatible with earlier CR31 revisions.

Posiflex · 16280201020

Posiflex 16280201020 Set Of 1 Screw And 1 Peg For TP8015T8WXP

Hardware component kit, specifically one screw and one peg, designed for the secure installation and maintenance of Posiflex TP8015T8WXP terminals

• Replacement screw and peg set keeps the TP8015T8WXP terminal securely fixed in place.
• Engineered specifically for the TP8015T8WXP — verify POS model before ordering.
• Supports counter or wall mount installations requiring hanger peg attachment hardware.