Lifesafety Power products
-
Lifesafety Power
SKU: FPO250/250-2C8P4D8PE4M1
Lifesafety Power FPO250/250-2C8P4D8PE4M1 Power supply board 250W
- Selectable 12VDC/20A or 24VDC/10A output matches existing lock and reader voltage requirements.
- 48 total outputs (16 relay lock + 32 aux DC) let one board drive strikes, readers, and sensors.
- Native Mercury/Lenel backplate support eliminates adapter hardware in existing panel enclosures.
$1,833.00 $1,203.99 Save $629.01 -
Lifesafety Power
SKU: FPO250/250-2C8P2D8PE8M1
Lifesafety Power FPO250/250-2C8P2D8PE8M1 Power Supplies: 2x FPO25
- Dual FPO250 supplies provide automatic failover, eliminating single points of failure.
- Integrated C8P and D8P accessory boards deliver pre-configured power distribution in one unit.
- E8M1 enclosure supports DIN rail or panel-surface mounting for flexible installation.
$2,754.00 $1,808.99 Save $945.01 -
Lifesafety Power
SKU: FPO250/250-2C8P2D8PE8SP
Lifesafety Power FPO250/250-2C8P2D8PE8SP 500W Dual Voltage 120
- 500W dual-voltage output supports multi-door access control and surveillance loads.
- 16 relay lock outputs enable synchronized door strike and magnetic lock control.
- 120 VAC input with 16 auxiliary outputs simplifies centralized power routing in rack or wall-mount.
$2,586.00 $1,698.99 Save $887.01 -
Lifesafety Power
SKU: FPO250/250-2C8D8E4
Lifesafety Power FPO250/250-2C8D8E4 Description is: Power supply
- Delivers 250W continuous output at 12VDC/20A or 24VDC/10A from a single board.
- Dual-voltage switchable design supports legacy 12V and newer 24V camera architectures.
- Plug-in board module centralizes DC distribution, reducing point-of-failure risk in large deployments.
$1,342.00 $881.99 Save $460.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8E6M1
Lifesafety Power FPO250/250-2C82D8E6M1 FPO250/250-2C82D8E6M1
- Dual independent 250W outputs let you segregate camera and access control loads.
- Supervised outputs report load faults in real time to your control panel or NVR.
- Each output is independently fused, preventing a single fault from cascading system-wide.
$2,385.00 $1,566.99 Save $818.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8E4
Lifesafety Power FPO250/250-2C82D8E4 16 lock 16 auxiliary outputs
- Dual 250W channels each supply 20A@12V or 10A@24V for mixed-voltage lock arrays.
- 16 lock and 16 auxiliary outputs, each fused at 3A, isolate faults to a single device.
- Single enclosure powers up to 16 doors, reducing distributed cabinet count on mid-scale sites.
$1,437.00 $943.99 Save $493.01 -
Lifesafety Power
SKU: FPO250/250-2B1005D8E4M1
Lifesafety Power FPO250/250-2B1005D8E4M1 FPO250/250-2B1004D8E4M1
- Dual independent 24 VDC outputs prevent cross-circuit voltage sag across control zones.
- Supports redundant or split-load configurations for access control and surveillance panels.
- Integrates with Mercury Unified access control architectures from a single panel location.
$1,764.00 $1,158.99 Save $605.01 -
Lifesafety Power
SKU: FPO250/250-2B1004C82D8E8M3
Lifesafety Power FPO250/250-2B1004C82D8E8M3 Mercury Unified Power
- Integrates FlexPower modules and Mercury access control in a single UL-listed enclosure.
- Consolidated power and credential management reduces cabinet count in secure rooms.
- UL listing confirms electrical safety compliance; verify local jurisdiction before acceptance.
$3,178.00 $2,087.99 Save $1,090.01 -
Lifesafety Power
SKU: FPO250/250/250-4C84D8E12S
Lifesafety Power FPO250/250/250-4C84D8E12S 250W power supply 20A
- Delivers 20A at 12VDC or 10A at 24VDC from a single 250W supply.
- 32 relay lock outputs, each 3A fused with per-output FAI/failsafe/failsecure selection.
- 32 isolated DC auxiliary outputs eliminate external relay banks in cabinet installs.
$6,198.00 $4,070.99 Save $2,127.01 -
Lifesafety Power
SKU: FPO250/250-5D8P3M8NLCE12M/P24-A
Lifesafety Power FPO250/250-5D8P3M8NLCE12M/P24-A Mercury ProWire
- 500W dual-voltage output supports locks, readers, and ancillary devices in one unit.
- 24 managed lock outputs enable power sequencing and load-shedding across multi-door deployments.
- 40 auxiliary outputs eliminate individual UPS modules, centralizing power for up to 40 circuits.
$9,662.00 $6,346.99 Save $3,315.01 -
Lifesafety Power
SKU: FPO250/250-3D8P3M8NLCE12M
Lifesafety Power FPO250/250-3D8P3M8NLCE12M 250W power supply 20A
- Eight 3A-fused outputs isolate downstream faults, preventing cascade shutdown across zones.
- Selectable 12VDC/20A or 24VDC/10A output supports mixed access control and video loads.
- Dual-bus supervision per output enables independent failover across physically separated subsystems.
$6,866.00 $4,509.99 Save $2,356.01 -
Lifesafety Power
SKU: FPO250/250-3D8P2M8PE8M2/P16-C
Lifesafety Power FPO250/250-3D8P2M8PE8M2/P16-C 250W power supply
- Dual-voltage output—12VDC/20A or 24VDC/10A—supports mixed access control loads from one unit.
- Eight independently assignable 2.5A Class 2 outputs eliminate external fusing on most terminal devices.
- E8 enclosure (36H×30W×6.5D in.) rack- or wall-mounts to centralize DC distribution in tight spaces.
$4,623.00 $3,036.99 Save $1,586.01 -
Lifesafety Power
SKU: FPO250/250-3D83M8NLCE12M
Lifesafety Power FPO250/250-3D83M8NLCE12M 250W power supply 20A
- Delivers 20A at 12VDC across 8 individually fused 3A outputs for granular load control.
- Per-output Bus1/Bus2 selectability eliminates single points of failure on multi-device deployments.
- 3A per-channel fusing protects cameras, locks, and auxiliaries without nuisance trips.
$6,866.00 $4,509.99 Save $2,356.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8PE4M1
Lifesafety Power FPO250/250-2C82D8PE4M1 2x250W power supply 20A/1
- Dual 250W modules deliver 20A@12VDC or 10A@24VDC per channel from one enclosure.
- 32 relay outputs (16 lock + 16 auxiliary) eliminate separate relay boards at each door.
- Each lock output is individually configurable for failsafe, failsecure, or FAI operation.
$1,690.00 $1,110.99 Save $579.01 -
Lifesafety Power
SKU: FPO250/250/250-3D8P5M8PNLCE12M/P24-B
Lifesafety Power FPO250/250/250-3D8P5M8PNLCE12M/P24-B Mercury Pro
- 750W total output powers 40 managed lock outputs and 24 auxiliary channels from one shelf.
- Centralized distribution eliminates separate power runs per zone, reducing installation labor.
- 120 VAC single-phase input integrates into standard mains without special service requirements.
$10,454.00 $6,866.99 Save $3,587.01 -
Lifesafety Power
SKU: FPO250/250/250-3C83D8PE12M
Lifesafety Power FPO250/250/250-3C83D8PE12M 250W power supply
- 8 independently fused 3A relay outputs support FAI, failsafe, or failsecure per door.
- Selectable 12VDC/24VDC output eliminates separate supplies on mixed-voltage deployments.
- 8 Class 2 auxiliary outputs at 2.5A each power REX buttons, sensors, and indicators.
$6,668.00 $4,379.99 Save $2,288.01 -
Lifesafety Power
SKU: FPO250/250/250-3C85D8PE12M/T24-A
Lifesafety Power FPO250/250/250-3C85D8PE12M/T24-A 750W Dual Volta
- Delivers 750W at 24V DC across 24 relay lock outputs for centralized door control.
- 40 auxiliary outputs support sensors, REX buttons, and indicators from one enclosure.
- Accepts 120V AC input; requires 15A minimum breaker with proper circuit protection.
$9,064.00 $5,953.99 Save $3,110.01 -
Lifesafety Power
SKU: FPO250/250/250-3C85D8PE12M
Lifesafety Power FPO250/250/250-3C85D8PE12M 750W Dual Voltage
- 750W total output consolidates power for multiple door locks, readers, and intercoms.
- 24 dedicated relay lock outputs reduce single points of failure across critical door infrastructure.
- 40 auxiliary outputs support readers, intercoms, and monitoring devices on one 120 VAC supply.
$7,015.00 $4,607.99 Save $2,407.01 -
Lifesafety Power
SKU: FPO150-B100C4D8PE2M
Lifesafety Power FPO150-B100C4D8PE2M 4 Door
- 150W output powers a full 4-door array—locks, readers, and aux devices from one cabinet.
- Dual 12VDC/24VDC outputs eliminate separate power drops for mixed-voltage door hardware.
- 20"H × 16"W × 4.5"D E2M enclosure fits wall-mount closets where rack space is unavailable.
$890.00 $584.99 Save $305.01 -
Lifesafety Power
SKU: FPO150-M8PNLCSD4PE4M
Lifesafety Power FPO150-M8PNLCSD4PE4M 150W power supply 12A/12V
- Delivers 150W at 12VDC/12A or 24VDC/6A to match legacy and modern security loads.
- Eight independent 2.5A Class 2 outputs eliminate external breakers and reduce panel wiring.
- Per-output supervision enables selective shutdown for fault isolation during commissioning.
$1,601.00 $1,051.99 Save $549.01