i-PRO

i-PRO

SKU: WV-QCA501APK

i-PRO WV-QCA501APK Multi I/O Cable

Factory-terminated multi-I/O cable for alarm, audio, and power integration

• Pre-assembled connectors for alarm input/output, bidirectional audio, and 12V DC power
• Color-coded and labeled conductors reduce installation time and wiring errors
• Plenum and riser-rated jacket meets building code compliance requirements

i-PRO

SKU: WV-QCA500APK

i-PRO WV-QCA500APK RJ45 Ethernet Cable 10-Pack

Waterproof RJ45 cables for outdoor surveillance, 10-pack

• Integrated waterproof connectors resist rain, humidity, and salt-air corrosion
• PoE (802.3af) support for powered i-PRO network cameras
• 10-pack quantity for multi-camera deployments and system expansion

i-PRO

SKU: WV-QCA501A

i-PRO WV-QCA501A I/O Multi Cable for Network Cameras

I/O multi cable for i-PRO dome cameras with 12VDC power and audio

• Consolidates power, audio, and control signals in single cable run
• 12VDC power support simplifies wiring for centralized or PoE setups
• HTTPS encryption protects configuration and firmware updates in transit

i-PRO

SKU: WV-QCA502

i-PRO I/o Cable FOR Aero PTZ - WV-QCA502

• Carries PTZ position feedback and relay signals without using the main video stream.
• Enables bidirectional I/O between Aero PTZ units and VMS alarm or automation systems.
• Connector and pinout are Aero-platform-specific, ensuring a secure, verified interface fit.

i-PRO

SKU: WV-QCA504

i-PRO WV-QCA504 I/O Cable for Audio

• Provides dedicated audio input connectivity for external microphone integration.
• Designed specifically for compatible i-PRO cameras and recorders, ensuring fit.
• Enables integrated audio-video monitoring within existing i-PRO deployments.

i-PRO

SKU: WV-QCA503

i-PRO WV-QCA503 Multi I/O Cable for Alarm In/Out

Multi I/O cable for alarm and audio integration with WJ-NX/NU recorders

• Discrete alarm input/output terminals plus stereo audio on single connector
• Supports 12V DC and 24V DC power with stainless steel corrosion protection
• Wall, pole, or pipe mounting options; pre-stripped wires for fast deployment

i-PRO

SKU: WV-QCA504PK

i-PRO WV-QCA504PK I/O Audio Cable 10-Pack

• 10-cable pack reduces per-unit cost and keeps spare inventory on the shelf.
• Audio input connectors enable synchronized audio/video capture at each camera.
• Standard I/O interface ensures consistent signal transmission across i-PRO systems.

i-PRO

SKU: WV-QCA503PK

i-PRO WV-QCA503PK Multi I/O Cable 10-Pack

• Supports audio input for i-PRO cameras with multi I/O connectors.
• 10-cable pack reduces reorder frequency across multi-camera deployments.
• Spare cables on hand streamline field service and minimize downtime.

i-PRO

SKU: SPCA932/2

i-PRO 2M Cable F/GPUS932 Series HD Cameras - SPCA932/2

• Purpose-built 2 m cable ensures signal integrity for GPUS932 Series HD cameras.
• Factory-terminated, manufacturer-keyed connectors eliminate field termination errors.
• NDAA compliant; compatible across the full i-PRO GPUS932 camera family.

i-PRO

SKU: TGS-3DP-T20F

i-PRO 20 Feet Trigger Cable - TGS-3DP-T20F

• 20 ft (6.1 m) run eliminates field splicing between camera and control devices.
• Manufacturer-keyed connectors ensure correct pin mapping with i-PRO alarm I/O.
• NDAA compliant; verified for i-PRO/Panasonic HD camera and accessory systems.

i-PRO

SKU: PGWD1901ZAC1

i-PRO Cable with Connector - PGWD1901ZAC1

• Factory-terminated connector eliminates field crimping errors and reduces callbacks.
• NDAA compliant design suits federally sensitive and government facility deployments.
• Compatible with i-PRO/Panasonic HD camera systems for interface, power, and signal runs.

i-PRO

SKU: IPS-LPR-ETH-SNSR

i-PRO IPS-LPR-ETH-SNSR ICV 25 Network Cable

• Purpose-built for i-PRO ICV 25 LPR systems, ensuring verified sensor and video compatibility.
• Supports 1080p (2 MP) video transmission for high-detail license plate capture over Ethernet.
• ONVIF-compliant design integrates with third-party NVRs and VMS platforms without custom config.

i-PRO

SKU: AGC20020GM

i-PRO Panasonic 20M Camera Head Cable FOR AG-MDC10G - AGC20020GM

• 20-meter run eliminates active repeaters between AG-MDC10G decoder and remote heads.
• Purpose-built for AG-MDC10G compatibility, avoiding impedance mismatch over long spans.
• Single 65-ft cable reach supports central rack deployments without topology redesign.

i-PRO

SKU: 102-RJ00

i-PRO Wireless MIC RX Power Cable - 102-RJ00

• Dedicated power cable engineered for i-PRO wireless MIC RX receiver hardware.
• Prevents power-related audio dropouts in 24/7 mission-critical surveillance deployments.
• Supports rack-mounted and distributed receiver configurations in integrated AV systems.

i-PRO

SKU: IPS-SVR-PWRCORD-EU

I-pro AC Server Power Cord 8FT FOR Europe. - IPS-SVR-PWRCORD-EU

• CEE 7/7 Schuko plug mates directly to 230 V continental European mains outlets.
• IEC 60320 C13 connector matches i-PRO server and NVR appliance PSU inlets exactly.
• HAR-rated insulation and CE markings satisfy EU regulatory inspection requirements.

i-PRO

SKU: ACPA12100-3389

i-PRO Lind Ac/dc Adapter Including Power Cord & - ACPA12100-3389

• Includes integrated power cord, eliminating sourcing delays during mobile deployments.
• Regulated AC/DC output protects camera and recording electronics from voltage spikes.
• Compact form factor supports concealed installation in vehicles and confined spaces.