i-PRO products
-
i-PRO
SKU: IPS-ICV-ETH-SIDE-X
i-PRO IPS-ICV-ETH-SIDE-X 50ft Shielded Multi I/O Cable
- Factory-terminated 50ft harness consolidates alarm I/O, audio, and 12V DC into one run.
- Shielded jacket preserves signal integrity across the full 50ft length without voltage drop.
- Plenum-rated jacket satisfies code requirements for installation in return air spaces.
$68.99 -
i-PRO
SKU: WJ-NX400/3000T3
i-PRO WJ-NX400/3000T3 64-Channel 3TB NVR
- Records 64 IP cameras simultaneously with H.265 compression, cutting storage overhead vs. H.264.
- Ships with 3TB installed; scales to 324TB max with RAID 0/1/5/6/10 redundancy options.
- ONVIF Profile S compliance enables brand-agnostic camera integration without proprietary gateways.
$9,081.00 $7,183.99 Save $1,897.01 -
i-PRO
SKU: WJ-NX400/27000T3
i-PRO WJ-NX400/27000T3 64-Channel 27TB NVR
- Records 64 channels at 4K/60 fps with 27TB pre-installed storage for long retention.
- H.265 compression cuts bitrate 40–60%, reducing bandwidth load on existing infrastructure.
- 32 alarm inputs and ONVIF Profile S support simplify integration with third-party cameras.
$11,528.00 $9,118.99 Save $2,409.01 -
i-PRO
SKU: WVCF354
i-PRO Indoor Fixed Analog Dome Camera With 650 - WVCF354
- 650 TVL resolution delivers clear monochrome or color output on existing CCTV runs.
- BNC composite output integrates directly with legacy DVRs and analog matrix switchers.
- Supports cable runs up to 300 ft on RG-59 coax without a distribution amplifier.
$360.00 $282.99 Save $77.01 -
i-PRO
SKU: WVCW594A
i-PRO Security PTZ ANA CAM W Rain Resistant - WVCW594A
- Rain-resistant PTZ keeps video running on exposed docks, ramps, and equipment yards.
- Runs on 12V DC over coax—no power redesign needed in existing analog PTZ deployments.
- Compatible with DVRs, hybrid NVRs, and analog matrix switchers via standard BNC input.
$2,402.00 $1,887.99 Save $514.01 -
i-PRO
SKU: MC-9420
i-PRO Credintial: 9420 Schlage Mifare Classic Smart - MC-9420
- Factory-programmed Mifare Classic 1K at 13.56 MHz eliminates field encoding on deployment.
- ISO card form factor drops into existing badge holder stock without hardware changes.
- NDAA-compliant credential integrates with Schlage AD-400, NDE, and HID reader platforms.
$5.80 $3.99 Save $1.81 -
i-PRO
SKU: MC-UPG-A-900
i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-900
- Converts R10/RP10 readers to iCLASS SE/Multiclass without rewiring or panel changes.
- Supports 13.56 MHz smart card and 125 kHz prox in one reader for mixed-credential sites.
- NDAA-compliant field upgrade rated –30°C to +65°C with Wiegand, RS-485, and OSDP output.
$114.83 $101.99 Save $12.84 -
i-PRO
SKU: MC-921PTNNEK00000
I-Pro Rdr RPK40 Multiclass Se Rev E Kpd Std - MC-921PTNNEK00000
- Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
- Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
- Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.
$23.04 $16.99 Save $6.05 -
i-PRO
SKU: MC-UPG-A-921
i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-921
- Upgrades R10/RP10 readers to iCLASS SE and multiclass support without hardware swap.
- Dual-frequency 13.56 MHz + 125 kHz prox covers legacy and modern credentials in one unit.
- OSDP, Wiegand, and RS-485 outputs integrate with existing access control infrastructure.
$114.83 $101.99 Save $12.84 -
i-PRO
SKU: MC-FPV4-E2M/4TX
i-PRO Powersupply: FPV4-E2M/4TX 4DR 6A/12V OR - MC-FPV4-E2M/4TX
- Delivers 6A at 12VDC across 4 fused outputs for reliable multi-door power distribution.
- Per-output overcurrent protection isolates faults without disrupting adjacent access points.
- NDAA-compliant enclosed cabinet rated -20°C to +49°C suits mechanical rooms and IT closets.
$705.00 $551.99 Save $153.01 -
i-PRO
SKU: MC-5395-CK100
i-PRO Reader: Black Wall Switch HID Thinline - MC-5395-CK100
In stock · Ships same business day$572.92 $334.99 Save $237.93 -
i-PRO
SKU: MC-TM400K1MC
i-PRO TM400K1MC ; (fuse Protected Output Version) - MC-TM400K1MC
- Per-output fuse protection isolates faults, preventing a single short from taking down the entire branch.
- Delivers 12VDC/24VAC selectable at 6A/150W from a 115VAC input, supporting mixed device loads.
- NDAA-compliant enclosed cabinet mounts in standard electrical panels across -20°C to +49°C environments.
$789.49 $543.99 Save $245.50






