APC Smart-ups VT Conduit BOX for 20.59INCH/523MM UPS Enclosure - SUVTOPT002

APC by Schneider Electric SUVTOPT002 Conduit Box for Smart-UPS VT Enclosures

Overview

The SUVTOPT002 is a conduit box designed specifically for APC Smart-UPS VT installations where clean, code-compliant cable routing is required at the UPS enclosure. At 460 × 230 × 120 mm (W×D×H) and 2.5 kg, it provides a dedicated pathway for conduit entry into the UPS chassis — keeping wiring organized, protecting conductors from abrasion at the entry point, and supporting installations that must meet facility or electrical code requirements for enclosed wiring runs.

This is a purpose-built enclosure accessory for the APC Smart-UPS VT platform. If your installation requires conduit termination rather than open cable entry, the SUVTOPT002 is the correct factory-matched component for that job. Installations in data centers, industrial environments, or facilities where electrical inspectors require enclosed wiring paths from the breaker panel to the UPS are the primary use case.

Key Features

• Matched Enclosure Dimensions (460 × 230 × 120 mm): Sized specifically for the Smart-UPS VT chassis footprint — no field fabrication, no adapter plates, and no gaps that would fail an electrical inspection.
• Compact Form Factor: At 120 mm depth, the conduit box adds minimal protrusion to the UPS installation footprint, a consideration in tight data center rows or equipment rooms where rack-adjacent clearance is limited.
• Low Shipping Weight (2.5 kg packaged): Straightforward one-person handling during installation; no lifting equipment required for the accessory itself.

Compatibility

The SUVTOPT002 is designed for use with the APC Smart-UPS VT product line. Verify your specific Smart-UPS VT model against APC's compatibility documentation before ordering — not all Smart-UPS VT configurations use the same conduit box variant. Review the power and UPS accessories category for related Smart-UPS VT components, or browse the full APC by Schneider Electric catalog for compatible UPS systems.

Frequently Asked Questions

Q: What UPS platform is the SUVTOPT002 designed for?

A: The SUVTOPT002 is a conduit box accessory designed for the APC Smart-UPS VT enclosure platform. Confirm compatibility with your specific Smart-UPS VT model before ordering.

Q: What are the dimensions of the SUVTOPT002?

A: The conduit box measures 460 mm wide × 230 mm deep × 120 mm high (W×D×H). Packaged dimensions are 465 × 305 × 125 mm at 2.5 kg.

Q: Is the SUVTOPT002 a replacement part or an optional add-on?

A: It is an optional accessory for Smart-UPS VT installations that require conduit cable routing. Not all Smart-UPS VT deployments require it — it is specified when the installation calls for enclosed, code-compliant conduit entry rather than open cable routing.

Q: Does the SUVTOPT002 include mounting hardware?

A: Package contents beyond the conduit box itself are not confirmed in available evidence. Contact your pre-sales engineer to verify what hardware ships in the box before installation day.

Ted Perry

The SUVTOPT002 comes up most often on Smart-UPS VT projects where the facility's electrical inspector or the customer's internal standards require conduit from the distribution panel all the way to the UPS — no open cable runs. At 460 × 230 × 120 mm, it's a factory-matched fit for the Smart-UPS VT chassis, which matters when you're trying to get a certificate of occupancy or pass a data center commissioning walkthrough without field modifications.

Technical Highlights:

• Enclosure dimensions (460 × 230 × 120 mm): Factory-matched to the Smart-UPS VT — means no custom sheet metal work on-site and no inspection failure for improper conduit termination at the UPS.
• Package dimensions (465 × 305 × 125 mm, 2.5 kg): Ships as a compact, single-carton accessory — easy to stage on-site and carry to the equipment room without a lift or a second person.
• Purpose-built accessory: Specified by APC for the Smart-UPS VT line, which means no guesswork on fit and no voiding any equipment warranty by using a field-fabricated alternative.

Deployment Considerations:

• Verify your exact Smart-UPS VT model number against the APC compatibility list before ordering — the Smart-UPS VT platform spans several chassis sizes and not all share the same conduit box variant.
• Available evidence does not confirm what mounting hardware ships in the box; confirm the bill of materials with your supplier before the installation date to avoid a return trip for missing fasteners.

The SUVTOPT002 is the right call for any Smart-UPS VT installation going into a facility that enforces enclosed wiring standards — hospitals, financial data centers, and industrial plants where electrical inspections are non-negotiable and open cable runs at the UPS will not pass.