APC by Schneider Electric APDU10350MO Advanced Metered Outlet Rack PDU
Overview
The APDU10350MO is a 3-phase, 415V/30A rack-mount power distribution unit delivering 17.3KW across 48 metered outlets — purpose-built for high-density rack environments where per-outlet power visibility matters. Outlet-level metering means you can track actual load per connected device rather than estimating from aggregate branch readings, which is the difference between proactive capacity planning and discovering overloads after a trip. The 5.9 ft (1.8 m) input cord and 530P6 plug terminate a 3-phase feed directly at the PDU, eliminating intermediate breakout hardware in properly wired three-phase racks. At 70.08 in (178.0 cm) in length, this is a full-height vertical PDU designed to mount in the dedicated PDU channels of standard 19-inch or 600/750mm open-frame and enclosed racks — not a shelf-mount horizontal unit. Weight is 21.2 lb (9.6 kg), so two-person installation is practical for overhead or rear-channel positioning.
Compatibility
Designed for APC by Schneider Electric NetShelter SX, SV, and VX enclosed rack cabinets that include rear vertical PDU mounting channels. The 530P6 input plug requires a matching 530R6 or equivalent IEC 60309 3-phase receptacle on the facility power strip or in-row PDU branch. Fits standard 0U vertical PDU bays in 42U–48U rack enclosures. IP44 ingress protection makes this compatible with light industrial and data-hall environments where incidental liquid splash or particulate exposure is present — it is not rated for outdoor or wash-down use. Pairs with rack-mount PDU monitoring infrastructure and APC EcoStruxure IT for remote outlet-level data aggregation. For lower-density or single-phase deployments, evaluate the APC AP78xx or AP86xx metered PDU families instead.
Installation Notes
Input plug is 530P6 (IEC 60309 3-phase 30A) — confirm the facility panel and in-rack power strip carry a mating 530R6 receptacle before ordering. Three-phase 415V is a European/international standard; verify local supply voltage matches before commissioning. The 178.0 cm body length fits 42U racks with standard vertical PDU channels; measure available vertical clearance in the PDU bay before mounting. Secure with the PDU's integrated mounting brackets to the rack's dedicated 0U channel — do not attempt to shelf-mount this unit.
