Altronix T2MK5F8DV Mercury Access and Power Integration Wall Mount Kit
Overview
The T2MK5F8DV is Altronix's wall-mount integration kit engineered to pair Mercury access control hardware with a dedicated power supply in a single enclosure. Running on 220VAC input and delivering 10 amps at 12VDC across 8 individually PTC-protected outputs, it consolidates power distribution and access control mounting into one panel — the kind of clean, auditable installation that enterprise security integrators expect when wiring multi-door commercial deployments. If you're speccing a Mercury-based access control project and need a purpose-built power backbone to go with it, the T2MK5F8DV is designed for exactly that workflow.
Altronix has built its reputation on power integration products for the security industry. Browse the full Altronix catalog to see how this kit fits alongside their broader line of power supplies, distribution boards, and enclosures.
Key Features
- 10A @ 12VDC Total Output: Ten amps of continuous 12VDC capacity gives you meaningful headroom when powering door controllers, readers, locks, and auxiliary devices simultaneously. At a typical 500mA per electric strike and 150mA per card reader, you can drive 8 doors worth of hardware without approaching the output ceiling.
- 220VAC Input: Designed for international and industrial electrical environments where 220VAC is the standard supply voltage — not a 110VAC North American retrofit. Confirm your panel feed before ordering; this is not dual-voltage switchable based on available evidence.
- 8 PTC-Protected Outputs: Polymeric Positive Temperature Coefficient (PTC) overcurrent protection on each of the 8 outputs means a shorted lock or malfunctioning reader trips only that circuit — the rest of the system stays live. Unlike fused outputs that require a technician to replace a fuse during an incident, PTC devices reset automatically once the fault clears.
- Mercury Access Integration: The kit is purpose-built to mount and integrate Mercury access control hardware, keeping the controller physically co-located with its power source. This matters for cable management, troubleshooting, and inspection — everything is in one location rather than distributed across a closet.
- Wall Mount Form Factor: Wall-mount installation keeps the assembly off the floor and within reach for service. For surveillance and security power products, a wall-mounted enclosure is the practical choice in IDF closets and server rooms where floor and rack space is at a premium.
- Consolidated Integration Design: Combining access control hardware mounting with power distribution in one enclosure reduces installation time, simplifies the as-built drawing, and gives a single point of reference for service calls. Separate power supplies mounted across the room from the controller are a common service headache this kit avoids.
Integration and Compatibility
The T2MK5F8DV is specifically matched to Mercury access control hardware. If your project runs a different access control platform, verify Mercury compatibility with your panel manufacturer before committing to this kit. The 8-output, 12VDC architecture aligns with standard access control device voltages — most electric locks, magnetic locks, request-to-exit sensors, and card readers operate in the 12VDC range, making the output spec a natural fit for a full multi-door deployment.
For larger deployments requiring more outputs or higher amperage, evaluate other models in the Altronix power integration line — they offer configurations scaled for 16- and 32-door systems. For camera and NVR power needs on the same project, pair this with a dedicated surveillance power supply rather than pulling from access control circuits.
Frequently Asked Questions
Q: What is the input voltage for the T2MK5F8DV?
A: The T2MK5F8DV operates on 220VAC input. It is not listed as dual-voltage, so verify your facility's panel supply before ordering.
Q: How many outputs does the T2MK5F8DV provide, and are they individually protected?
A: The kit provides 8 outputs, each individually protected by a PTC (Polymeric Positive Temperature Coefficient) device. A fault on one output does not take down the others, and PTC protection resets automatically once the fault clears — no fuse replacement needed.
Q: What output voltage and current does the T2MK5F8DV supply?
A: The T2MK5F8DV delivers 12VDC at 10 amps total across its 8 outputs.
Q: Is the T2MK5F8DV compatible with all Mercury access control hardware?
A: The kit is designed for Mercury access and power integration. Confirm compatibility with your specific Mercury controller model with your Mercury or Altronix representative, as hardware generations may vary.
Q: What is the typical lead time for the T2MK5F8DV?
A: Based on current availability, the T2MK5F8DV typically ships within 5–7 business days.
Q: Can the T2MK5F8DV power electric strikes and magnetic locks on the same system?
A: Yes — at 12VDC and 10A total output, the T2MK5F8DV can simultaneously power a mix of electric strikes, maglocks, readers, and RTE sensors across its 8 outputs, provided total current draw across all connected devices stays within the 10A rated capacity.
The T2MK5F8DV addresses one of the most persistent headaches in Mercury-based access control deployments: keeping the controller, power supply, and output distribution physically organized in a single auditable location. The 10A @ 12VDC capacity with 8 PTC-protected outputs is sized right for a standard 4-to-8-door deployment where you're driving a mix of locks, readers, and request-to-exit devices off one panel.
Technical Highlights:
- PTC Overcurrent Protection (8 outputs): Each output carries its own PTC device — a shorted strike or failed reader drops only that circuit, not the door controller or adjacent hardware. Auto-reset means no fuse hunting during an incident.
- 10A @ 12VDC Total Capacity: Across 8 outputs, that's an average of 1.25A per channel — enough headroom for maglocks (typically 500–600mA), readers (100–200mA), and RTE sensors simultaneously without derating.
- 220VAC Input: Purpose-built for 220VAC supply environments — international facilities, industrial buildings, or domestic panels running 220V feeds. This is not a universal-input supply; the input voltage is fixed by design.
Deployment Considerations:
- Verify your electrical panel delivers 220VAC before speccing this kit — swapping a power supply after rough-in is expensive. If your facility runs 110VAC, look at the parallel Altronix kit variants with matching input voltage.
- PTC protection resets automatically, but a device that repeatedly trips its PTC is signaling a wiring or hardware fault that needs investigation — auto-reset is not a substitute for diagnosing the root cause.
The T2MK5F8DV is a strong fit for commercial office buildouts, healthcare facilities, and education campuses running Mercury access control on 220VAC infrastructure — specifically where the integrator wants power, distribution, and controller hardware consolidated in one wall-mount enclosure rather than spread across a telecom closet.
