Altronix TAPE1 Double-Sided Adhesive Mounting Pads
Overview
The Altronix TAPE1 is a straightforward adhesive fastening solution designed for mounting Altronix enclosures and components to walls, racks, and smooth surfaces without drilling, screwing, or permanent hardware. This approach saves installation time in retrofit scenarios and locations where mechanical fasteners are impractical — such as rented spaces, finished walls, or equipment racks where you need reversibility.
Key Features
- Double-sided adhesive design: Bonds securely to both the enclosure base and mounting surface, meaning you don't need separate mounting brackets or hardware — reduces parts inventory and simplifies logistics.
- Non-permanent fastening: Unlike mechanical anchors, the TAPE1 allows removal without wall damage, critical for temporary deployments, proof-of-concept installations, or tenant spaces where you can't drill.
- Suitable for smooth surfaces: Works on drywall, finished panels, painted surfaces, and polished metal — versatile enough for most security infrastructure installations without surface preparation beyond cleaning.
- Eliminates drilling: No need for masonry bits, anchors, or a power drill — accelerates deployment in sensitive environments like server rooms or control centers where dust and vibration must be minimized.
- Lifetime Limited Warranty: Backed by Altronix warranty coverage, confirming the adhesive meets manufacturer durability standards for the intended mounting applications.
Typical Deployment Scenarios
- Wall-mounted enclosures: Mount power supplies, PoE injectors, or small distribution boxes to dry interior walls in control rooms or network closets without structural damage.
- Rack-adjacent mounting: Secure small components to the sides or rear of equipment racks where drilling into the rack itself is not allowed or desirable.
- Retrofit and temporary installations: Deploy adhesive fastening in rented facilities or proof-of-concept systems where you need to remove equipment cleanly at project end.
- Dust-sensitive environments: Avoid the vibration and particulate scatter of drilling in clean rooms, broadcast facilities, or critical infrastructure control centers.
What You Should Know Before Selecting
Adhesive fastening carries trade-offs. The TAPE1 works best on clean, dry, smooth surfaces; textured paint, rough concrete, or heavily oiled metal may reduce bond strength. Outdoor or high-vibration applications demand mechanical fasteners — adhesive alone is not suitable for exterior enclosures or equipment subject to frequent movement or shock loading. Temperature extremes can affect adhesive performance; verify the ambient conditions match the tape's rated operating range. Weight capacity depends on surface condition and adhesive formula — do not assume the TAPE1 will hold the same load as a through-bolted mount. For critical equipment, conduct a pull test with your specific surface and enclosure weight before full deployment.
Integration with Altronix Enclosures
The TAPE1 is engineered as a companion accessory to the full Altronix enclosure line, complementing models across the power, distribution, and integration portfolio. Confirm your enclosure base is compatible with adhesive bonding — some models with rubber feet or textured bases may require surface preparation or mechanical mounting instead.
Frequently Asked Questions
Q: Can I use the TAPE1 outdoors?
A: No. The adhesive is rated for dry, interior environments only. Outdoor mounting requires mechanical fasteners or weatherproof enclosure-specific brackets.
Q: What surfaces will the TAPE1 bond to?
A: Smooth, clean surfaces — drywall, painted walls, polished metal, and finished panels. Textured, rough, or heavily oiled surfaces will reduce adhesive strength. Clean the mounting surface with a dry cloth before application.
Q: Is the TAPE1 removable?
A: Yes. Unlike permanent mechanical fasteners, the adhesive allows removal, though the process may require careful heating or solvents to avoid surface damage. Test removal technique on a non-critical surface first.
Q: How much weight can the TAPE1 hold?
A: Weight capacity depends on surface condition, ambient temperature, and time since installation. Always conduct a pull test with your specific enclosure and mounting surface before deploying to production.
Q: Does the TAPE1 work in temperature extremes?
A: Extreme heat or cold can degrade adhesive performance. Verify the tape's operating temperature range matches your installation environment — interior climate-controlled spaces are ideal.
Q: What's the warranty coverage?
A: The TAPE1 is backed by Altronix Lifetime Limited Warranty, covering defects in material and workmanship under normal use conditions.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Altronix TAPE1 solves a real problem: how to mount small enclosures, PoE injectors, and power distribution boxes without creating holes in finished walls or racking infrastructure. It's an accessory that gets overlooked until you're in a retrofit, rented facility, or clean-room environment where drilling is off-limits. The double-sided adhesive design means you're relying entirely on bond strength to the surface and the enclosure base — no mechanical backup.
Technical Highlights:
- Double-sided adhesive formula: Bonds enclosure to mounting surface in a single step — no brackets, no fasteners, no secondary hardware. Reduces parts count and installation time in retrofit scenarios.
- Non-permanent fastening: Allows removal and repositioning without wall damage — essential for temporary deployments, proof-of-concept systems, and tenant spaces where permanent modification is prohibited.
- Smooth-surface compatibility: Works on drywall, painted panels, polished metal, and finished surfaces — versatile across typical security infrastructure locations, but demands clean, dry conditions for reliable bond.
Deployment Considerations:
- Surface preparation is non-negotiable — textured paint, rough concrete, or oily finishes degrade bond strength significantly. A quick wipe with a dry cloth is the minimum; better results come from mild alcohol prep on high-value mounts.
- Weight capacity is surface-dependent and time-dependent. The adhesive cures over hours to days, so don't treat a freshly mounted enclosure as load-rated immediately. Conduct a pull test on a dummy mount with your actual surface and enclosure weight before going live.
- Outdoor exposure, vibration, and temperature cycling are adhesive killers. The TAPE1 is rated for dry, interior, relatively stable environments only. If your enclosure will see thermal swing, humidity, or outdoor exposure, mechanical fasteners are your only option.
The TAPE1 is the right choice for temporary or semi-permanent interior mounting where drilling or mechanical brackets are impractical — particularly in retrofit control rooms, proof-of-concept networks, and rented facilities. It's not a substitute for bolted mounting in permanent, outdoor, or high-vibration applications. Test the bond on your specific surface before committing to production deployment.
