Middle Atlantic Adjustable Turn Hdwr 1PR - CLH-ADJT

Middle Atlantic CLH-ADJT Adjustable Cable Ladder Turn Hardware

Overview

The CLH-ADJT is a single-pair adjustable turn hardware kit for Middle Atlantic cable ladder runs. It solves the directional-change problem at corners and offsets in structured cabling pathways — where a fixed splice would force a rigid 90° bend that stresses conductors and blocks future reruns. The adjustable design lets you dial in the exact angle required at the transition point, keeping cable bends within spec and the pathway visually clean.

Compatibility

Designed for use with Middle Atlantic cable ladder systems in the CLH series. Use this hardware wherever the ladder run changes direction horizontally — at room corners, equipment room entries, or overhead pathway junctions in rack rooms and server environments. Pairs with standard CLH ladder sections; confirm ladder width matches before ordering. Not rated for vertical transitions — use the appropriate vertical turn hardware for up/down direction changes.

Installation Notes

The black zinc coat finish provides corrosion resistance suitable for indoor structured cabling environments. Hardware ships as one pair (two pieces), covering a single transition point. Height profile is 1 in (2.5 cm), which factors into overhead clearance planning in low-ceiling or plenum spaces. Shipping weight is 1.9 lbs (0.9 kg). Note: this SKU is not TAA compliant — if your project requires TAA-compliant components throughout (federal, GSA, or DoD installations), source the appropriate TAA variant before specifying.

What's in the Box

• 1x pair adjustable turn hardware (2 pieces)