ACTi PMAX-0715 Junction Box
Overview
The PMAX-0715 is a centralized junction box designed to consolidate power and signal distribution for ACTi A-series indoor cameras in wall, ceiling, and rack installations. It accepts PoE+ (802.3at) input and eliminates the need to run individual power supplies to each camera location—a significant simplification in multi-camera builds where cable runs converge at a single patch point or where rack space is constrained.
Compatibility
The PMAX-0715 is compatible with ACTi A88, A92, A94, and A96 camera models. It accepts PoE+ (802.3at) input, meaning a single PoE+ switch port supplies power to the junction box; from there, the box distributes signal and power to the supported cameras. Verify your upstream switch has sufficient PoE+ budget per port (minimum 30W) to avoid undersupply during startup or peak draw.
Installation Notes
This box is rated for indoor and standard installation environments. Mount it at a central cable convergence point—wall, ceiling, or within a small equipment rack—to minimize cable runs to cameras and reduce unterminated runs. Position near the network switch or inline with your PoE+ run to avoid excessive voltage drop over long distances. Ensure adequate ventilation around the box if mounted in an enclosed cabinet.
What's in the Box
No package contents are documented in the available evidence. Contact the supplier for confirmation of included mounting hardware, cable guides, or termination aids.
