Wall Mounts & Brackets
Showing Results for Wall Mounts & Brackets
-
ACTi
SKU: PMAX-0320
ACTi PMAX-0320 Tilted Wall Mount for Hemispheric
- Tilted wall-mount design optimizes downward coverage angle for hemispheric domes.
- Engineered for ACTi hemispheric dome cameras — verify model compatibility before ordering.
- Eliminates need for separate articulating hardware when mounting on interior or exterior walls.
$28.00 $20.99 Save $7.01The item has been added -
ACTi
SKU: PMAX-0321
ACTi PMAX-0321 Heavy Duty Wall Mount for Outdoor Domes
- Heavy-duty wall bracket secures ACTi A8x outdoor dome cameras to vertical surfaces.
- Built to resist temperature swings, moisture, and UV without compromising camera aim.
- Bracket weighs 2.7 lbs — factor dome weight when sizing wall anchors and substrate.
$261.00 $193.99 Save $67.01The item has been added -
ACTi
SKU: PMAX-0322
Acti PMAX-0322 Wall Mount
Wall bracket for ACTi Z950/Z952 cameras with PoE power
- 2MP resolution support with PoE (802.3af) for simplified wiring
- Designed for Z950 and Z952 camera models only
- Indoor and mixed-environment wall mounting
$125.00 $94.99 Save $30.01The item has been added -
ACTi
SKU: PMAX-0324
Acti PMAX-0324 Wall Mount for A950
Wall mount for ACTi A950 camera with PoE power
- PoE (802.3af) powered—no separate power cable required
- Designed for A950 camera, supports 2MP resolution
- Indoor wall-mounted surveillance with fixed positioning
$176.00 $175.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0330
Acti PMAX-0330 10-Degree Tilted Wall Mount for Outdoor
Outdoor wall mount with 10° tilt for ACTi hemispheric cameras
- 10-degree tilt angle reduces glare and enables precise lens positioning
- Aluminum construction rated for outdoor wall, eave, and soffit mounting
- Compatible with ACTi hemispheric camera models for perimeter surveillance
$72.00 $55.99 Save $16.01The item has been added -
ACTi
SKU: PMAX-0338
Acti PMAX-0338 35-Degree Tilted Wall Mount
35-degree wall mount for ACTi fisheye and hemispheric cameras
- 35-degree tilt angle optimizes positioning in tight spaces or walls
- Compatible with ACTi fisheye and hemispheric panoramic camera models
- Requires standard fasteners and load-bearing wall surface for installation
$125.00 $94.99 Save $30.01The item has been added -
ACTi
SKU: PMAX-0346
Acti PMAX-0346 Heavy Duty Wall Mount for A951
Heavy duty wall bracket for Acti A951 cameras with PoE+ power
- Engineered mount supports A951 2MP camera in wall-mounted configurations
- PoE+ (802.3at) power delivery eliminates separate power runs at installation
- Heavy duty construction rated for indoor and controlled environment deployments
$713.00 $527.99 Save $185.01The item has been added -
ACTi
SKU: PMAX-0354
Acti PMAX-0354 Heavy Duty Wall Mount
Heavy-duty wall mount for Acti A711/A713 2MP fixed dome cameras
- PoE (802.3af) powered—no separate power runs needed for installation
- Permanent wall-surface mounting for flexible sightline positioning on building perimeters
- Heavy-duty construction rated for commercial and industrial outdoor environments
$366.00 $270.99 Save $95.01The item has been added -
ACTi
SKU: 185-00080
ACTi RD Poe+ Wall Mount Black - 185-00080
- Designed specifically for ACTi RD PoE+ camera bodies, ensuring a verified fit.
- Single PoE+ connection carries both power and data, eliminating separate power runs.
- Compatible with drywall and masonry surfaces using appropriate anchors or bolts.
$463.00 $446.99 Save $16.01The item has been added -
ACTi
SKU: SMAX-0154
Acti SMAX-0154 Pole and Wall Mount Kit
Dual pole and wall mount kit for Acti 2MP PoE cameras
- Includes PMAX-0503 and PMAX-0313 mounts for flexible deployment options
- PoE (802.3af) powered—no separate power supply needed
- Supports vertical pole or direct wall surface installation
$179.00 $178.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0306
Acti SMAX-0306 Pole and Wall Mount
Dual pole and wall mount for Acti PoE+ camera systems
- PoE+ (802.3at) power delivery eliminates separate power supplies
- Flexible installation—mount to pole or wall with single bracket
- Metal construction rated for indoor and outdoor deployments
$96.00 $85.99 Save $10.01The item has been added -
ACTi
SKU: MOM00511
ACTi Tilt AND Swivel Tablet ARM Wall Mount - MOM00511
- OEM-sourced part preserves the host product's original ingress and environmental ratings.
- Exact manufacturer fit eliminates rework risk on field replacements and new installations.
- Documented ACTi part number (MOM00511) streamlines warranty claims and depot service logs.
$66.99The item has been added -
ACTi
SKU: 185-00555
ACTi Wedge Vesa Wall Mount - Black - 185-00555
- VESA 75 and 100 mm compatibility eliminates custom brackets across camera families.
- Wedge angle provides built-in downward tilt, reducing glare in corridor deployments.
- Vendor-agnostic design mounts any standard VESA-pattern surveillance camera to walls.
$44.99The item has been added -
Aiphone
SKU: AC-C
Aiphone AC-C ADA Wall Mount Enclosure with Light Cage
ADA-compliant wall enclosure with integrated light cage for AC Series access control
- ADA-compliant steel wall enclosure with light cage
- 19.3 x 13.6 x 3 in housing for access hardware
- Improves entry visibility for ADA installations
$292.00 $167.99 Save $124.01The item has been added -
Altronix
SKU: ALTV248ULMI
Altronix ALTV248ULMI UL Listed CCTV AC Isolated Wall Mount 8
8-channel 24VAC isolated wall mount for distributed CCTV power
- Eight isolated 24VAC circuits with 12.5A total capacity for multi-camera setups
- AC isolation topology eliminates ground-loop hum in surveillance installations
- UL Listed and CE approved, 115VAC input, wall-mount form factor
$527.67 $289.99 Save $237.68The item has been added -
Altronix
SKU: ALTV615DC101622
Altronix ALTV615DC101622 16-Output 12VDC Wall Mount
16-channel 12VDC/6VDC wall-mount power supply for distributed security
- 16 independently fused outputs at selectable 12VDC or 6VDC voltage
- Up to 11A capacity at 12VDC or 10A at 6VDC for multi-camera systems
- 230VAC input, wall-mount form factor, UL Listed
$500.43 $303.99 Save $196.44The item has been added
Wall Mounts & Brackets
Wall mounts and brackets provide secure installation solutions for surveillance cameras, intercoms, and access control devices mounted to vertical surfaces. Proper wall mounting supports stable positioning, optimal field-of-view alignment, and clean cable routing in commercial environments.
Plan Your Deployment
- Camera or device compatibility and mounting interface
- Wall material and structural support considerations
- Indoor vs outdoor environmental requirements
- Cable concealment and weatherproofing planning
- Future service access and upgrade flexibility
Wall Mounts & Brackets — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 210 working models of wall mounts & brackets sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 6MP, 5MP |
| IP Rating | IP66, NEMA 4X, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | AC/DC, PoE, PoE+, PoE++ |
| Storage | microSD |
| Type | Accessory, Dome, Enclosure, Adapter, PTZ, NVR, Cable, Switch |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.