STI

SKU: STI-1100NR

STI Stopper II® with Horn Flush Mount No Label - STI-1100NR

• 95 dB integral sounder activates on cover lift, immediately deterring false pulls.
• 24VDC independent power keeps call point circuit unaffected during installation.
• Blank no-label housing supports custom labeling or clean unlabeled deployment.

STI

SKU: STI-1100-ES

STI Stopper II® with Horn Flush Mount Spanish Label - STI-1100-ES

• Flush-mount design seats cleanly into standard electrical box openings for low-profile installs.
• Integrates with Stopper II® delayed-egress strike platforms via low-voltage signal wiring.
• Spanish-label variant meets multilingual facility requirements without retrofit labeling or extra SKUs.

STI

SKU: STI-1200CR

STI Stopper II® without Horn Flush Mount Custom - STI-1200CR

• Flush-mount geometry minimizes frame protrusion, reducing accidental activation risk.
• Accepts 12V or 24V input, compatible with standard commercial access control supplies.
• Custom label option enables facility or tenant identification without field modification.

STI

SKU: STI-1200

STI Stopper II® without Horn Flush Mount Fire Label - STI-1200

• NEMA 3R neoprene gasket seal blocks water ingress in washdown environments.
• Flush-mount design integrates 24VDC electromagnetic or electromechanical strikes cleanly.
• Lifetime breakage warranty reduces long-term replacement risk in high-traffic installs.

STI

SKU: STI-1200-FR

STI Stopper II® without Horn Flush Mount French - STI-1200-FR

• Flush-mount profile eliminates protruding box hazards in high-traffic corridors.
• Rated 63VDC — verify control module and strike assembly match before ordering.
• Operates from −20 °C to +105 °C, supporting stable indoor and outdoor enclosures.

STI

SKU: STI-1200NR

STI Stopper II® without Horn Flush Mount No Label - STI-1200NR

• Flush mounts into any standard single- or multi-gang electrical box for clean integration.
• Accepts 12VDC or 24VDC horn activation, compatible with most access control panel outputs.
• No-label face accepts custom overlays, eliminating hardware swaps when button ID changes.

STI

SKU: STI-1225

STI Stopper® Dome for Strobe Only - Flush Mount - STI-1225

• NEMA 4-rated clear dome shields strobe appliances from rain, dust, and salt spray.
• Flush-mount profile installs flat against surface with no stand-offs for clean fit.
• Includes six #8-32 socket cap screws, washers, and Rawl plugs for complete mounting.

STI

SKU: STI-13020FR

STI Universal Stopper - Flush Mount with Sounder, ACTIVATE FIRE ALA...

Flush-mount fire alarm stopper with integrated sounder, 24VDC

• 24VDC operation integrates with standard fire alarm and access control systems
• Integrated sounder delivers audio notification at point of egress control
• Flush-mount design fits discrete installation in door frame applications

Ubiquiti

SKU: UACC-AI-THETA-PRO-PFM-CAMERA

Ubiquiti UACC-AI-THETA-PRO-PFM-CAMERA Flush Mount

Flush ceiling mount for Ubiquiti AI Theta Pro cameras, 73.6mm diameter

• 73.6 × 73.7 mm diameter fits standard ceiling tile cutouts for low-profile installs.
• Polycarbonate and zinc alloy construction delivers corrosion resistance with only 100 g weight.
• Purpose-built for AI Theta Pro lens systems, ensuring precise alignment and cable routing.

Ubiquiti

SKU: UACC-DISPLAY-FM

Ubiquiti UACC-DISPLAY-FM Flush Mount for UniFi Connect Display

Flush wall mount for UniFi Connect Display with aluminum/polycarbonate construction

• Flush-mount bracket for UniFi Connect Display
• 23 in polycarbonate + aluminum mount assembly
• Clean wall-flush install for lobby and meeting rooms

Ubiquiti

SKU: UACC-G5-DOME-ULTRA-FM-B

Ubiquiti UACC-G5-DOME-ULTRA-FM-B Flush Mount Bracket

Recessed mounting bracket for Ubiquiti G5 Dome Ultra cameras

• Flush-mounts UVC-G5-Dome-Ultra into walls or ceilings for a recessed, low-profile finish.
• Supports wall, ceiling, and recessed installations in drywall and standard ceiling materials.
• Compact 100 × 88 mm footprint keeps camera hardware integrated into the mounting surface.

Ubiquiti

SKU: UACC-G5-DOME-ULTRA-FM-W

Ubiquiti UACC-G5-DOME-ULTRA-FM-W Flush mount accessory

Flush mount bracket for G5 Dome Ultra cameras, wall and ceiling

• Recessed wall and ceiling mount keeps G5 Dome Ultra cameras flush with finished surfaces.
• Lightweight 0.73 lb assembly minimizes anchor requirements in drywall and retrofit installs.
• Designed exclusively for G5 Dome Ultra; integrates into UniFi deployments without extra config.

Ubiquiti

SKU: UACC-U7-PRO-WALL-FM

Ubiquiti UACC-U7-PRO-WALL-FM Paintable Flush Mount

Paintable flush mount for U7 Pro Wall access points

• Polycarbonate housing accepts standard latex or acrylic paint to match any wall finish.
• Flush-mount profile keeps the U7 Pro Wall level with the wall plane—zero protrusion.
• Compact 190 × 142 × 49 mm footprint fits standard in-wall rough-in cavities cleanly.

Vivotek

SKU: AM-105_V03

Vivotek AM-105_V03 Recessed Ceiling Mount Kit

Flush recessed ceiling mount for Vivotek FD-series dome cameras

• Flush recessed design minimizes visual profile in indoor institutional and corporate spaces.
• SECC bracket with PC+ABS cover fits Ø205×146 mm ceiling cutout for clean cavity integration.
• Supports 10 verified FD-series models including FD9181-HT; confirm compatibility before ordering.

Vivotek

SKU: AM-107

Vivotek AM-107 White Speed Dome Recessed Kit

Recessed ceiling mount kit for Vivotek speed dome cameras

• Flush Ø 230 mm polycarbonate housing with 11 mm depth for discreet integration
• White finish blends with standard ceiling panels in corporate and retail spaces
• Compatible with Vivotek speed dome camera line for straightforward installation

Vivotek

SKU: AM-10E

Vivotek AM-10E Recessed Speed Dome Mounting Kit

Recessed ceiling mount for Vivotek speed domes with full PTZ range

• Flush-mount design integrates into ceiling for discreet professional look
• Compatible with Vivotek speed dome cameras, supports pan-tilt-zoom motion
• Complete kit includes all hardware needed for ceiling installation