Recessed Mounts & Brackets
Showing Results for Recessed Mounts & Brackets
-
Camden
SKU: CX-WC14XFM
Camden CX-WC14XFM Flush Mount Two Door Restroom Controller
- Controls two independent electric strikes with isolated relays, enforcing door sequencing logic.
- TCP/IP connectivity enables remote activation, occupancy monitoring, and event logging over LAN.
- Flush-mount form factor installs in a standard electrical box, preserving ADA maneuvering clearance.
$1,969.00 $1,204.99 Save $764.01The item has been added -
Camden
SKU: CX-WC15XFM
Camden Flush Mount AURA Illuminated Push Plate - CX-WC15XFM
- TCP/IP communication enables direct integration into existing IP access control networks.
- Controls electric strike hardware, supporting push-to-exit activation at secured door points.
- Flush-mount form factor provides a clean, low-profile installation in wall surfaces.
$1,350.00 $826.99 Save $523.01The item has been added -
Camden
SKU: CX-WC13XFM
Camden Flush Mount AURA™ Illuminated Push Plate - CX-WC13XFM
- Flush-mount form factor eliminates surface enclosure bulk in barrier-free restroom installs.
$945.00 $578.99 Save $366.01The item has been added -
Camden
SKU: CX-WC13AXFM-PSFE
Camden Flush Mount Combo Illuminated Push - CX-WC13AXFM-PSFE
- Flush single-gang mount eliminates surface enclosures and extra wall penetrations.
- Integrated LED confirms door unlock status without separate annunciator or relay logic.
- 24VDC relay output integrates directly with CX-WC Series kits and electric strike hardware.
$1,438.00 $867.99 Save $570.01The item has been added -
Camden
SKU: CX-95S-DH
Camden Magnetic Door Holder Surface/Flush Mount - CX-95S-DH
- Tri-volt coil accepts 12V, 24V AC/DC, or 120V AC—wire once, select at commissioning.
- Ships with surface and flush hardware; flush depth drops to 1-3/4″ for frame-recessed installs.
- Adjustable armature compensates for frame misalignment, maintaining consistent 35 lb holding force.
$157.99The item has been added -
Camden
SKU: CM-120i
Camden Stand alone or Wiegand flush mount 999 users - CM-120i
- Standalone or Wiegand flush-mount keypad stores 999 user PINs
- 12/24V AC/DC operation drops into standard access power buses
- Variable-length PIN code support for tiered access policies
$167.99The item has been added -
Code Blue
SKU: CBCE00005
Code Blue CBCE00005 Centry Flush Mount
- Wired RJ45 Ethernet with PoE eliminates RF dependency for reliable dispatch routing.
- 4GB onboard memory retains call logs and audio through network backhaul interruptions.
- Rated -40°C to 70°C; flush-mount at 4.0 lbs fits lobbies and docks without modification.
$2,050.00 $1,774.99 Save $275.01The item has been added -
Code Blue
SKU: CBCE00006
Code Blue CBCE00006 Centry Flush Mount-C
- Ethernet/PoE hardwired connection eliminates wireless failure risk for reliable call initiation.
- 4GB onboard memory queues event logs and call history during network interruptions.
- Rated -40°C to 70°C, suitable for parking structures, outdoor shelters, and harsh climates.
$2,210.00 $1,913.99 Save $296.01The item has been added -
Code Blue
SKU: CBCE00007
Code Blue CBCE00007 Centry Flush Mount Dark Gray
- Flush-mount RJ45 Ethernet eliminates wireless dead zones in shielded or underground sites.
- Onboard 4 GB storage retains call logs and event data independent of server or cloud availability.
- –40 °C to 70 °C operating range supports unheated parking structures and outdoor shelters.
$1,875.00 $1,591.99 Save $283.01The item has been added -
Comelit
SKU: 3460/6
Comelit 3460/6 Flush Mount Box for 5-6 Button
Recessed wall box for 5-6 button Comelit intercom modules
- Flush mounts into walls or columns, eliminating surface protrusions in finished spaces.
- Purpose-built for Comelit 5-6 button modules, ensuring correct footprint and connector fit.
- 2-year warranty backs residential and commercial intercom deployments across facility types.
$180.80 $179.99 Save $0.81The item has been added -
Comelit
SKU: CLI1F
Comelit CLI1F Ikall Metal 1 Pb Flush Mount
Single-button flush mount intercom for Comelit Ikall systems
- Flush-mount profile integrates cleanly into standard single-gang wall boxes.
- Metal housing delivers durable construction for residential and light commercial door stations.
- Designed exclusively for Comelit Ikall systems; verify central unit compatibility before deployment.
$1,810.32 $1,232.99 Save $577.33The item has been added -
Comelit
SKU: CLI2F
Comelit CLI2F Ikall Metal 2 Pb Flush Mount
2-button flush mount intercom panel for Comelit Ikall systems
- Flush-mount form factor integrates cleanly with standard electrical boxes for retrofit or new build.
- Two-button metal panel fits Comelit Ikall ecosystem wiring and protocol without adapters.
- Italian-made housing with 2-year warranty supports reliable indoor entry-point deployments.
$2,063.84 $1,405.99 Save $657.85The item has been added -
Digital Watchdog
SKU: DWC-DJFM
Digital Watchdog DWC-DJFM Flush Mount for DJ Domes
- Flush mount bracket for DJ series dome cameras
- Recessed install for clean professional ceiling appearance
- Drop-in compatibility with existing DJ dome housings
$133.00 $132.99 Save $0.01The item has been added -
Digital Watchdog
SKU: DWC-P230FMW
Digital Watchdog DWC-P230FMW Flush Mount White
Flush-mount bracket for 30x PTZ cameras with IP66 weatherproof aluminum
- Aluminum alloy construction resists corrosion in outdoor installations
- IP66 rating protects against dust and water spray in wet environments
- Ceiling and wall integration hides brackets for clean architectural appearance
$338.00 $197.99 Save $140.01The item has been added -
Digital Watchdog
SKU: DWC-PV20FMW
Digital Watchdog DWC-PV20FMW Flush Mount White
Flush-mount white aluminum accessory for Digital Watchdog varifocal domes
- Aluminum alloy construction resists corrosion in indoor and covered outdoor use
- Recessed ceiling/wall integration eliminates visual protrusion below mounting plane
- Compatible with Digital Watchdog multi-sensor varifocal dome cameras
$298.00 $173.99 Save $124.01The item has been added -
Digital Watchdog
SKU: DWC-VFFMW
Digital Watchdog DWC-VFFMW White Vandal Dome Flush Mount
Flush ceiling/wall mount for Digital Watchdog vandal dome cameras
- Aluminum alloy construction rated for 5x combined camera and bracket weight
- Operating range -40°F to 140°F with 10–90% humidity tolerance indoors/outdoors
- Includes mounting template, screws, and quick start guide for fast installation
$124.00 $123.99 Save $0.01The item has been added
Recessed Mounts & Brackets
Recessed mounts and brackets provide flush installation solutions for surveillance cameras in commercial and institutional environments. These mounts support low-profile aesthetics, reduced tampering exposure, and clean cable concealment.
Plan Your Deployment
- Wall or ceiling cutout requirements
- Camera compatibility and mounting interface alignment
- Structural support and surface material considerations
- Indoor environmental requirements
- Service access and maintenance planning
Recessed Mounts & Brackets — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 35 working models of recessed mounts & brackets sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Type | Accessory |
| Durability | Indoor/Outdoor |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.