Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: TAF-EST22581
ACTi TAF-EST22581 Network Surveillance Component
- Per-unit tariff pass-through fee applied transparently to associated ACTi hardware.
- Mandatory import duty surcharge ensures accurate landed-cost accounting per unit.
- Applies directly to the linked ACTi imported product for clean PO line-item tracking.
$19.99The item has been added -
ACTi
SKU: TAF-MUV27-PRSC
ACTi Taf-printer / Scanner Accessory FOR MUV - TAF-MUV27-PRSC
- Integrates printer and scanner into a single module purpose-built for ACTi MUV Series cameras.
- Synchronizes scanned credentials with video timestamps to simplify forensic and compliance review.
- Reduces peripheral device count at access points by consolidating document verification hardware.
$39.99The item has been added -
ACTi
SKU: TAF-MUV PRO 27
ACTI Tariff - Taf-Muv Pro 27
- Per-unit tariff surcharge keeps import duty costs visible and separated in project quotes.
- Supports compliant cost documentation for government and institutional procurement requirements.
- Applies directly to associated ACTi imported hardware, enabling accurate budget line-item tracking.
$203.99The item has been added -
ACTi
SKU: TAF-CDS-NIO75-NIDS-S20
ACTi Tariff Allocation FEE AS Mandated - TAF-CDS-NIO75-NIDS-S20
- Itemizes mandatory import duty as a per-unit surcharge for full cost transparency.
- Enables accurate project quoting by isolating tariff costs from hardware pricing.
- Ensures customs compliance for ACTi imported hardware under current trade regulations.
$131.99The item has been added -
ACTi
SKU: TAF-(CTI-OTHER-FUEL)
ACTi Tariff Allocation FEE AS Mandated BY - TAF-(CTI-OTHER-FUEL)
- Separate line-item billing isolates tariff cost from base hardware for clean PO documentation.
- Per-unit pass-through structure simplifies change order tracking on fixed-price or municipal bids.
- Ensures U.S. CBP compliance for imported ACTi cameras, NVRs, and accessories automatically.
$240.99 $214.99 Save $26.00The item has been added -
ACTi
SKU: TAF-CDS-MBLDS-EVOH
ACTi Tariff Allocation FEE AS Mandated BY - TAF-CDS-MBLDS-EVOH
- Mandatory per-unit fee covers actual import duty costs for qualifying ACTi hardware.
- Itemized separately so project estimates and client invoices reflect true landed cost.
- Pass-through charge carries no markup, ensuring transparent budget reconciliation.
$495.99The item has been added -
ACTi
SKU: ERE032720
ACTi THE Enterprise Dovetail Power Cable Connects - ERE032720
- Proprietary dovetail connector locks securely, preventing accidental disconnection post-install.
- Engineered exclusively for ACTi THE Enterprise camera series, eliminating compatibility guesswork.
- Mechanical locking interface maintains reliable power in high-traffic retail, healthcare, and education sites.
$86.90 $85.99 Save $0.91The item has been added -
ACTi
SKU: MOM00511
ACTi Tilt AND Swivel Tablet ARM Wall Mount - MOM00511
- OEM-sourced part preserves the host product's original ingress and environmental ratings.
- Exact manufacturer fit eliminates rework risk on field replacements and new installations.
- Documented ACTi part number (MOM00511) streamlines warranty claims and depot service logs.
$66.00 $65.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1016
ACTi Tilt Flush Mount for Fixed/Fisheye Covert - PMAX-1016
- Tilt flush mount for ACTi fixed and fisheye covert cameras
- Recessed ceiling install for flush-against-surface camera housing
- NDAA-compliant white housing for federal and gov deployments
$100.00 $99.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1017
ACTi Tiltable Flush Mount for Pinhole Covert Cameras - PMAX-1017
- Tiltable mechanism allows field-of-view adjustment after flush installation.
- Flush mount keeps all hardware hidden behind drywall, tile, or wall cavities.
- Engineered for ACTi pinhole camera form factor and lens barrel diameter only.
$169.00 $168.99 Save $0.01The item has been added -
ACTi
SKU: TRL-SOLAR
ACTi Trailer W/18FT Mast Turnkey Crime Deterrent - TRL-SOLAR
- Solar-charged battery keeps cameras and onboard recording running without grid power.
- 18-ft mast clears ground-level obstructions for broad site coverage from a single unit.
- Cellular backhaul and active deterrents (speaker/floodlight) enable remote-monitored deployment.
$22,000.00 $19,895.99 Save $2,104.01The item has been added -
Add to Cart The item has been addedACTi
SKU: TT-6523C
ACTi TT-6523C
- Designed for commercial and enterprise ACTi surveillance deployments.
- Integrates with professional ACTi product lines for standardized system pairing.
- Verify model compatibility with system documentation before procurement.
$3,679.00 $2,074.99 Save $1,604.01The item has been added -
ACTi
SKU: TV-I5-CHROME
ACTi TV-I5-CHROME Network Surveillance Component
- Intel Core i3 OPS slot-in module deploys cleanly into compatible interactive displays.
- 8 GB RAM supports concurrent Chrome Enterprise management and surveillance applications.
- Chrome OS standardizes endpoint management across large-scale display deployments.
$1,249.00 $874.99 Save $374.01The item has been added -
ACTi
SKU: TVULTRA75-G4
ACTi TVULTRA75-G4 Network Surveillance Component
- 75-inch PCAP touch panel suits large-format interactive signage deployments.
- HDMI, USB-C, USB, and Ethernet ports simplify structured cabling and AV integration.
- Wall-mount form factor enables flush installation in lobbies, NOCs, or control rooms.
$4,999.00 $2,056.99 Save $2,942.01The item has been added -
ACTi
SKU: TVW-100
Acti TVW-100 4-Monitor Rackmount Display System
4-monitor rackmount display with PoE power for IP surveillance
- Four integrated monitors in rack-mount form factor for centralized monitoring
- PoE (802.3af) powered—no separate AC circuits needed at display location
- 940nm infrared night vision with 10-88mm varifocal lens for flexible focal range
$12,070.00 $8,926.99 Save $3,143.01The item has been added -
ACTi
SKU: 185-00952
ACTi Un-encrypted MSR BLK - Elite Case - 185-00952
- Purpose-built Elite case shields ACTi MSR hardware from impact, dust, and moisture in the field.
- Protective padding and secure latches prevent equipment shift during transport and rapid deployment.
- Model-specific fitment — verify MSR model against ACTi compatibility matrix before ordering.
$99.00 $98.99 Save $0.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.