Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: RVR-20C
ACTi Remote Video Recorder - Cloud Connector FOR UP TO - RVR-20C
- Eliminates port forwarding and VPN setup for secure remote site access.
- Maintains local recording while enabling cloud-based management via encrypted tunnel.
- Activated via license key and cloud account provisioning for rapid multi-site rollout.
$450.00 $310.99 Save $139.01The item has been added -
ACTi
SKU: DV135TILE- REP
ACTI Replacement Tile For The Dv 135IN - DV135TILE- REP
- Genuine ACTi replacement tile restores full resolution on DV135IN video walls.
- Modular panel design enables drop-in repair or expansion without full array replacement.
- Engineered exclusively for DV135IN; prevents mechanical or electrical misalignment.
$419.00 $234.99 Save $184.01The item has been added -
ACTi
SKU: DV150TILE- REP
ACTI Replacement Tile For The Dv 150IN - DV150TILE- REP
- Genuine ACTi factory replacement tile maintains fit and finish for DV150 installations.
- Sourced through authorized US distribution with manufacturer warranty intact.
- Spare part designation supports standardized BOM planning for multi-site deployments.
$299.00 $241.99 Save $57.01The item has been added -
ACTi
SKU: DV163TILE- REP
ACTI Replacement Tile For The Dv 163IN - DV163TILE- REP
- ACTi OEM replacement tile restores DV163IN camera to factory specification.
- Genuine factory-new part keeps manufacturer warranty intact on the host unit.
- Sourced from US authorized distribution, ensuring no grey-market supply risk.
$379.00 $210.99 Save $168.01The item has been added -
ACTi
SKU: DV189TILE- REP
ACTI Replacement Tile For The Dv 189IN - DV189TILE- REP
- Restores full coverage on the DV189IN array without reconfiguring control hardware or VMS.
- Plug-and-play tile swap — no calibration or software provisioning required after reconnection.
- Designed exclusively for the DV189IN system, ensuring matched footprint and seamless edge-blending.
$339.00 $187.99 Save $151.01The item has been added -
ACTi
SKU: DV216TILE- REP
ACTI Replacement Tile For The Dv 216IN - DV216TILE- REP
- Genuine ACTi replacement tile restores DV216IN video wall without full assembly swap.
- Drop-in fit requires no additional cabling or firmware updates after seating the tile.
- Compatible exclusively with DV216IN deployments — verify parent model before ordering.
$299.00 $298.99 Save $0.01The item has been added -
ACTi
SKU: FLEX-SDM
ACTI Sdm Computer For Flex- I7 16GB Ram 256GB SSD - Flex-Sdm
- Intel Core i7 CPU delivers processing headroom for compute-intensive VMS workloads.
- 16 GB RAM supports concurrent analytics and multi-stream video processing tasks.
- 256 GB SSD provides fast boot times and reliable storage for edge applications.
$3,839.00 $2,162.99 Save $1,676.01The item has been added -
ACTi
SKU: TV-I5-PCMODULE
ACTI Slot-In I5 Ops Pc Module - Tv-I5-Pcmodule
- OPS slot-in design eliminates external PC mounting and consolidates power via the display.
- Intel Core i5 handles VMS client software, multi-stream decoding, and analytics dashboards.
- Industrial-grade components support 24/7 continuous operation in monitoring environments.
$1,249.00 $932.99 Save $316.01The item has been added -
ACTi
SKU: TV-I7-PCMODULE
ACTI Slot-In I7 Ops Pc Module - Tv-I7-Pcmodule
- Slots into OPS-compatible displays, eliminating external PCs and cable runs.
- Intel Core i7 processor handles multi-stream VMS clients in control room deployments.
- Single OPS connector delivers both power and video, simplifying per-display installation.
$1,949.00 $1,224.99 Save $724.01The item has been added -
ACTi
SKU: BNDL-S
ACTi Small Demployment Bundled KIT - BNDL-S
- Pre-matched 2MP camera and accessory bundle reduces procurement and config overhead.
- PoE connectivity eliminates separate power runs, simplifying small-site cable planning.
- Bundled compatible components deploy out of the box for branch or retail installations.
$6,800.00 $6,465.99 Save $334.01The item has been added -
ACTi
SKU: 185-00066
ACTi Smartback Aava/zebra 8INCH W Accy Black - 185-00066
- Purpose-built 8-inch Smartback accessory ensures standardized fit within ACTi ecosystems.
- Compatible with ACTi Aava and Zebra system architectures for streamlined integration.
- Black finish with model 185-00066 simplifies parts identification across multi-unit deployments.
$214.00 $206.99 Save $7.01The item has been added -
ACTi
SKU: 185-00700
ACTi Smartback Cradle Ingenico ISMP4 Black - 185-00700
- Securely mounts Ingenico ISMP4 terminals to walls, counters, or kiosks.
- Cradle requires no external power, simplifying installation at any surface.
- Black finish suits retail, hospitality, and enterprise deployment environments.
$95.00 $94.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0009
Acti SMAX-0009 Corner Mount with Gooseneck for Outdoor
Corner mount with gooseneck for outdoor ACTi thermal cameras
- Adjustable gooseneck design for precise camera angle positioning
- PoE powered (802.3af) eliminates separate power infrastructure
- Outdoor-rated construction for perimeter and facility monitoring
$269.00 $198.99 Save $70.01The item has been added -
ACTi
SKU: SMAX-0052
Acti SMAX-0052 Pendant Mount with Mount Kit
Pendant mount for suspended ceiling Acti camera installations
- Complete mount kit with fasteners and installation hardware included
- Indoor ceiling suspension design supports Acti camera systems
- Lightweight 1 lb assembly for straightforward field deployment
$172.00 $171.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0065
Acti SMAX-0065 Gooseneck with Mount Kit
Gooseneck mount kit for ACTi IP cameras with adjustable positioning
- Flexible gooseneck design accommodates varied camera angles in confined spaces
- Complete mount kit hardware included for professional surveillance installations
- White finish, 13.2 lb construction rated for ACTi camera systems
$225.00 $224.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0104
Acti SMAX-0104 Pole Mount with Gooseneck for Outdoor
Pole-mount gooseneck for outdoor 2MP cameras with PoE power
- Gooseneck design allows flexible camera angle adjustment for optimal sightlines
- PoE 802.3af power delivery eliminates separate power runs to pole locations
- Outdoor-rated construction supports ACTi 2MP and compatible IP cameras
$254.00 $188.99 Save $65.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.