Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: PMAX-0820
Acti PMAX-0820 Gang Box Converter
Gang box converter for ACTi cameras in flush-mount wall/ceiling setups
- Fits 4-inch round and octagonal electrical gang boxes for seamless integration
- PoE powered (802.3af) with no additional power infrastructure required
- Supports ACTi A71, A74, Z91, Z94, Z95 models in new and retrofit installations
$100.00 $99.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1003
Acti PMAX-1003 Flush Mount Kit
Flush wall mount kit for Acti D6x–E88 dome cameras, PoE powered
- In-wall concealed mounting for discrete 2MP camera placement
- Compatible with D6x, D7x, D8x, E61–E67, E7x, E81–E88 series
- Single PoE (802.3af) connection eliminates separate power runs
$153.00 $152.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1006
Acti PMAX-1006 Indoor Flush Mount Kit
Flush mount kit for 2MP Acti cameras on walls and ceilings
- Wall and ceiling flush integration with clean cable routing
- PoE powered (802.3af) for standard network camera deployments
- In-wall/in-ceiling installation without additional brackets needed
$111.00 $110.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1010
Acti PMAX-1010 Indoor Flush Mount Kit
Flush mount kit for ACTi KCM-8111 cameras, PoE powered
- 2MP resolution with PoE (802.3af) power—no separate wiring needed
- Wall and rack mount options for flexible indoor deployment
- Indoor surface-mounted design fits retail, office, and facility settings
$385.00 $285.99 Save $99.01The item has been added -
ACTi
SKU: PMAX-1011
Acti PMAX-1011 Flush Mount Kit for B511
Flush mount kit for Acti B511 2MP camera, recessed ceiling/wall install
- Bracket assembly with hardware for tight recessed integration into ceiling or wall
- Designed for B511 PoE cameras requiring clean, minimal visual footprint indoors
- Complete kit includes all necessary mounting components for B511 deployment
$172.00 $171.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1011-218R5
Acti PMAX-1011-218R5 Custom Flush Mount Kit
Custom flush mount kit for ACTi BHP cameras in 19-inch racks
- Designed for ACTi BHP camera series with fixed professional surveillance
- 19-inch standard rack configuration for equipment integration
- White housing, 2 lb weight for compact flush-mount installation
$90.00 $89.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1012
Acti PMAX-1012 Indoor Flush Mount Kit
Flush mount kit for Acti B61/B62/B64 cameras, PoE powered
- Low-profile recessed installation for clean ceiling/wall integration
- PoE 802.3af power eliminates separate wiring at mount point
- Compatible with B61, B62, B64 indoor camera models
$83.00 $82.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1013
Acti PMAX-1013 Flush Mount Kit
Flush mount kit for ACTi B8x/B9x 2MP cameras with PoE power
- Pole and rack mount options for flexible indoor installation setups
- PoE (802.3af) powered—no separate power infrastructure needed
- 850nm IR night vision for 24/7 surveillance on 2MP systems
$94.00 $93.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1014
Acti PMAX-1014 Flush Mount Kit
Flush ceiling/wall mount kit for Acti E610 series 2MP cameras
- Recessed installation integrates seamlessly into ceiling or wall cavities
- PoE (802.3af) powered — no separate power lines needed on-site
- Compatible with E610, E611, E612, and E613 camera models
$100.00 $99.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1015
Acti PMAX-1015 Flush Mount Kit
Flush ceiling mount kit for recessed Acti camera deployment
- Fits Acti B71, E89, E815, E816, E817, E822 camera models
- PoE powered—no additional wiring or power supply needed
- Recessed ceiling installation for clean, concealed security setups
$100.00 $99.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1021
Acti PMAX-1021 Flush Mount for E78
Flush-mount bracket for Acti E78 2MP camera with PoE power
- Designed for E78 2MP camera; ceiling, wall, or rack installation
- Single PoE (802.3af) connection eliminates separate power wiring
- Pendant and rack-mount configurations for flexible deployment options
$186.00 $185.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1027
Acti PMAX-1027 Flush Mount for A61 A62 A8x Series
Flush mount bracket for Acti A61, A62, A8x series PoE cameras
- Recessed in-ceiling installation hides camera for clean aesthetic
- PoE power support eliminates need for separate electrical runs
- Metal bracket assembly secures 2MP cameras in commercial spaces
$103.00 $102.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1105
ACTi PMAX-1105 Indoor Box Camera Bracket
- Mounts ACTi B2x series box cameras securely in standard 19-inch rack frames.
- Pre-drilled mounting points allow installation with a standard wrench—no special tools.
- Consolidates camera hardware in control rooms and NOCs alongside switching and recording gear.
$14.00 $13.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1106
ACTi PMAX-1106 Outdoor Box Camera Bracket
- Rack-mount design secures ACTi outdoor box cameras to standard 19-inch frames.
- Eliminates camera sag over time, maintaining repeatable alignment in fixed installs.
- Stainless steel construction supports corrosion-resistant outdoor deployments.
$67.00 $66.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1107
ACTi PMAX-1107 Bullet Bracket D3X D4X E3X E41-E43
- Mounts ACTi D3X, D4X, E3X, E41, and E43 bullet cameras into standard 19-inch racks.
- Eliminates ad-hoc placement, delivering repeatable camera alignment across multi-unit deployments.
- No camera or enclosure modification required — install directly with industry-standard rack hardware.
$67.00 $66.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-1108
ACTi PMAX-1108 Covert Camera Bracket
- Rack-mount design seats ACTi covert IP cameras inside 19" or 23" rack infrastructure.
- Keeps camera lens concealed behind bezel or panel cutouts for discreet deployments.
- Passive mechanical bracket—no power, wiring, or firmware required for installation.
$244.00 $180.99 Save $63.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.