Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: PMAX-0316
Acti PMAX-0316 Wall Mount for D5x D9x E5x E9x Series
Wall mount bracket for Acti compact cameras with PoE power
- Supports D5x, D9x, E5x, E9x, and E9xxM series cameras
- Powered via PoE (802.3af) eliminates separate power wiring
- Integrated cable management for clean indoor wall installations
$105.00 $104.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0318
Acti PMAX-0318 Wall Mount for A91 A92 Z91 A61 A62
Wall bracket for Acti 2MP cameras with PoE power and fixed mounting
- Supports A91, A92, Z91, A61, A62 camera models with permanent installation
- PoE (802.3af) power eliminates need for separate electrical infrastructure
- Rated for outdoor use; white finish integrates with standard wall deployment
$139.00 $138.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0320
ACTi PMAX-0320 Tilted Wall Mount for Hemispheric
- Tilted wall-mount design optimizes downward coverage angle for hemispheric domes.
- Engineered for ACTi hemispheric dome cameras — verify model compatibility before ordering.
- Eliminates need for separate articulating hardware when mounting on interior or exterior walls.
$28.00 $27.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0321
ACTi PMAX-0321 Heavy Duty Wall Mount for Outdoor Domes
- Heavy-duty wall bracket secures ACTi A8x outdoor dome cameras to vertical surfaces.
- Built to resist temperature swings, moisture, and UV without compromising camera aim.
- Bracket weighs 2.7 lbs — factor dome weight when sizing wall anchors and substrate.
$261.00 $193.99 Save $67.01The item has been added -
ACTi
SKU: PMAX-0322
Acti PMAX-0322 Wall Mount
Wall bracket for ACTi Z950/Z952 cameras with PoE power
- 2MP resolution support with PoE (802.3af) for simplified wiring
- Designed for Z950 and Z952 camera models only
- Indoor and mixed-environment wall mounting
$125.00 $124.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0323
Acti PMAX-0323 Wall Mount with Built-in Junction Box
Wall mount with built-in junction box for Acti Z-series cameras
- PoE (802.3af) powered—no separate power runs required at installation
- Integrated junction box consolidates cable routing and reduces visible wiring
- Compatible with Acti Z91, Z81, and Z82 indoor surveillance cameras
$177.00 $176.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0324
Acti PMAX-0324 Wall Mount for A950
Wall mount for ACTi A950 camera with PoE power
- PoE (802.3af) powered—no separate power cable required
- Designed for A950 camera, supports 2MP resolution
- Indoor wall-mounted surveillance with fixed positioning
$176.00 $175.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0330
Acti PMAX-0330 10-Degree Tilted Wall Mount for Outdoor
Outdoor wall mount with 10° tilt for ACTi hemispheric cameras
- 10-degree tilt angle reduces glare and enables precise lens positioning
- Aluminum construction rated for outdoor wall, eave, and soffit mounting
- Compatible with ACTi hemispheric camera models for perimeter surveillance
$72.00 $71.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0331
Acti PMAX-0331 Height Strip Mount L-Shape Pinhole Covert
L-shaped pinhole mount for discreet ACTi camera installations
- L-shaped height strip design fits tight spaces for covert placement
- PoE (802.3af) powered—integrates with ACTi pinhole camera systems
- Compact mounting accessory for flexible surveillance positioning
$98.00 $97.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0338
Acti PMAX-0338 35-Degree Tilted Wall Mount
35-degree wall mount for ACTi fisheye and hemispheric cameras
- 35-degree tilt angle optimizes positioning in tight spaces or walls
- Compatible with ACTi fisheye and hemispheric panoramic camera models
- Requires standard fasteners and load-bearing wall surface for installation
$125.00 $124.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0346
Acti PMAX-0346 Heavy Duty Wall Mount for A951
Heavy duty wall bracket for Acti A951 cameras with PoE+ power
- Engineered mount supports A951 2MP camera in wall-mounted configurations
- PoE+ (802.3at) power delivery eliminates separate power runs at installation
- Heavy duty construction rated for indoor and controlled environment deployments
$713.00 $527.99 Save $185.01The item has been added -
ACTi
SKU: PMAX-0354
Acti PMAX-0354 Heavy Duty Wall Mount
Heavy-duty wall mount for Acti A711/A713 2MP fixed dome cameras
- PoE (802.3af) powered—no separate power runs needed for installation
- Permanent wall-surface mounting for flexible sightline positioning on building perimeters
- Heavy-duty construction rated for commercial and industrial outdoor environments
$366.00 $270.99 Save $95.01The item has been added -
ACTi
SKU: PMAX-0402
Acti PMAX-0402 Corner Mount White
Corner mount for 8MP cameras with PoE power in white finish
- PoE (802.3af) eliminates separate power runs at corner installations
- Fits ACTi 8MP cameras and ONVIF-compliant IP cameras with standard form factors
- Wall and corner-mounted deployment in indoor and outdoor environments
$250.00 $184.99 Save $65.01The item has been added -
ACTi
SKU: PMAX-0403
ACTi PMAX-0403 Corner Mount for Covert Cameras
- Corner mount positions covert/pinhole cameras to cover two perpendicular walls at once.
- Keeps camera body out of direct sightlines — ideal for aisle intersections and corridor junctions.
- Compatible with ACTi covert and pinhole camera series; verify model before ordering.
$44.00 $43.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0503
Acti PMAX-0503 Pole Mount Kit
Pole mount kit for 2MP Acti cameras, PoE powered, indoor/outdoor
- Mounts six Acti camera models (PMAX-0102, 0312, 0313, 0314, 0702, 1106)
- PoE 802.3af power eliminates separate wiring to pole locations
- Rated for both indoor and outdoor environments, white finish
$305.00 $225.99 Save $79.01The item has been added -
ACTi
SKU: PMAX-0504
Acti PMAX-0504 Pole Mount
Pole mount bracket for Acti compact cameras with PoE power
- Fits B4x, E44, E45, E46, and E44A series cameras
- Weather-resistant construction rated for outdoor 24/7 surveillance
- PoE power eliminates need for separate power infrastructure at pole
$194.00 $193.99 Save $0.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.