Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: CTI-PCMOD-MU16
ACTi PC Module - Memory Upgrade TO 16GB DDR4 - CTI-PCMOD-MU16
- 16GB DDR4 capacity removes RAM bottlenecks on high camera-count NVR deployments.
- Factory-validated compatibility eliminates timing and voltage mismatches in ACTi platforms.
- Field-installable expansion module upgrades memory without replacing the host system.
$319.00 $284.99 Save $34.01The item has been added -
ACTi
SKU: CTI-PCMOD-S500
ACTi PC Module - Storage Upgrade TO 500GB SSD - CTI-PCMOD-S500
- 500GB SSD capacity supports 24/7 local recording and analytics buffering.
- Purpose-built for ACTi PC module-based systems and edge recorder slots.
- SSD form factor eliminates spinning-disk failure risk in always-on deployments.
$399.00 $356.99 Save $42.01The item has been added -
ACTi
SKU: CTI-SRVCS-RFP1
ACTi PD Allocated PER Panel - CTI-SRVCS-RFP1
- Centralizes power distribution for ACTi peripheral panels, eliminating multiple adapters.
- Simplifies wire management across multi-door and distributed access control deployments.
- Integrates directly into ACTi access control and intercom infrastructure as a hardware module.
$499.00 $174.99 Save $324.01The item has been added -
ACTi
SKU: PIOC-0200
Acti PIOC-0200 USB to RS-232 Serial Converter Cable
USB-to-RS-232 serial converter for Acti thermal imaging systems
- USB 2.0 to DB-9 RS-232 interface connects legacy serial devices
- Compatible with Acti thermal imaging camera installations
- Enables serial communication for device control and configuration
$105.00 $104.99 Save $0.01The item has been added -
ACTi
SKU: 800-00001_00041
ACTi Pipeline Kiosk 12I FOR Ipad - Black W/ba - 800-00001_00041
- Black powder-coated steel enclosure resists tampering in high-traffic lobbies.
- Weighted base enables freestanding deployment without structural wall modification.
- Integrated cable management conceals power and network runs for clean installs.
$337.00 $330.99 Save $6.01The item has been added -
ACTi
SKU: 800-00001_00091
ACTi Pipeline Kiosk 12I FOR Surface-black - 800-00001_00091
- Surface-mount black enclosure secures Microsoft Surface 12-inch tablets against removal.
- Internal cable routing eliminates exposed wiring, reducing tamper risk in public areas.
- Ventilated design supports continuous operation in high-traffic access control deployments.
$357.00 $350.99 Save $6.01The item has been added -
ACTi
SKU: 800-00001_00214
ACTi Pipeline Kiosk 12I FOR TAB A - Black - 800-00001_00214
- Locking enclosure secures the host tablet against removal during operating hours.
- Integrated cable management routes power and data through the chassis for a clean install.
- Compatible with floor, counter, or wall mount points to fit varied deployment layouts.
$278.00 $270.99 Save $7.01The item has been added -
ACTi
SKU: 800-00001_00215
ACTi Pipeline Kiosk 24I FOR TAB A - Black - 800-00001_00215
- Locking enclosure secures the host tablet against removal during operating hours.
- Integrated cable management routes power and data through the chassis for clean installs.
- Compatible with floor, counter, or wall mount points to suit varied deployment layouts.
$288.00 $280.99 Save $7.01The item has been added -
ACTi
SKU: 800-00001_00033
ACTi Pipeline Kiosk 42I FOR Ipad - White W/ba - 800-00001_00033
- Locking enclosure secures iPad against removal during unattended public-facing operation.
- Integrated cable management routes power and data internally for a clean, tamper-resistant install.
- White finish suits retail and lobby environments; supports floor, counter, or wall mounting.
$407.00 $401.99 Save $5.01The item has been added -
ACTi
SKU: 800-00001_00093
ACTi Pipeline Kiosk 42I FOR Surface-black - 800-00001_00093
- Kiosk enclosure purpose-built for Surface-black ACTi surveillance deployments.
- Pipeline 42I form factor ensures consistent mechanical interface across installations.
- Integrated cable management simplifies field installation in standardized kiosk mounts.
$407.00 $401.99 Save $5.01The item has been added -
ACTi
SKU: 800-00001_00030
ACTi Pipeline Kiosk 8I FOR Ipad - White W/bas - 800-00001_00030
- Tabletop base secures iPad as a fixed VMS display—no wall or ceiling mount needed.
- White finish integrates cleanly into reception desks, control rooms, and security stations.
- No power connection required for the mount itself, simplifying deployment on any counter.
$371.99The item has been added -
ACTi
SKU: 800-00001_00237
ACTi Pipleine Kiosk 42I - 800-00001_00237
- ONVIF-compliant integration supports deployment alongside third-party VMS platforms.
- Ethernet connectivity enables direct command-center network integration at installation.
- 100–240V AC power input supports fixed control-room installations globally.
$367.00 $348.99 Save $18.01The item has been added -
ACTi
SKU: PMAX-0102
ACTi PMAX-0102 Straight Tube without Bracket
- Bracket-free rack-mount design reduces component count and simplifies installation.
- Compatible with ACM-7411, TCM-7411, and TCM-7811 camera enclosure profiles.
- Zinc-plated construction supports cable routing within indoor rack environments.
$272.00 $200.99 Save $71.01The item has been added -
ACTi
SKU: PMAX-0103
ACTi PMAX-0103 Pendant Tube with Bracket
- Supports pendant and rack mounting modes to adapt to existing ceiling infrastructure.
- Compatible with ACTi ACM-7xxx, TCM-7xxx, and KCM-7xxx dome camera families.
- Assembly weight of 1.9 lb; verify ceiling load rating before installation.
$408.00 $301.99 Save $106.01The item has been added -
ACTi
SKU: PMAX-0104
Acti PMAX-0104 Indoor/Outdoor Extension Tube
Extension tube for Acti cameras with PoE power, indoor/outdoor rated
- PoE (802.3af) powered—no extra wiring needed for indoor or outdoor setup
- Recessed mounting support fits Acti multi-sensor and fixed camera systems
- Outdoor-rated housing handles both interior and exterior deployment environments
$363.00 $268.99 Save $94.01The item has been added -
ACTi
SKU: PMAX-0110
Acti PMAX-0110 Indoor Mount Kit for KCM-8111
Ceiling/wall mount kit for KCM-8111 PTZ camera with PoE power
- Single PoE (802.3af) connection powers camera and eliminates extra wiring
- Designed for Acti KCM-8111 PTZ systems in indoor controlled environments
- Supports 2MP resolution with integrated structural support for secure mounting
$103.00 $102.99 Save $0.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.