Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: 185-00212
ACTi KIT Table Stand Vesa Aa-gravity WHT - 185-00212
- VESA 75×75 and 100×100 mm compatibility covers most commercial flat-panel displays.
- Gravity-base design requires no tools or active hardware—simplifies NOC desk deployments.
- White finish suits control-room and command-station environments with light-colored consoles.
$119.90 $118.99 Save $0.91The item has been added -
ACTi
SKU: ERE033420
ACTi KIT UAI MSR Unencrypted Aa-ent BLK - ERE033420
- Integrates with ACTi UAI MSR systems for modular, multi-camera surveillance deployments.
- Supports unencrypted credential storage for seamless third-party software and ACS integration.
- Black finish; deploy on isolated VLANs or air-gapped segments to maintain credential security.
$109.00 $108.99 Save $0.01The item has been added -
ACTi
SKU: 185-00109
ACTi KIT Wallmount Poe+ NO RFID Aa-rd BLK - 185-00109
- PoE+ (802.3at) support delivers up to 30W over a single Cat5e/Cat6 run.
- Wall-mount design installs directly to concrete, brick, or wood framing.
- Eliminates separate power supplies by combining power and data on one cable.
$396.00 $372.99 Save $23.01The item has been added -
ACTi
SKU: BNDL-L
ACTi Large Demployment Bundled KIT - BNDL-L
- Single SKU bundles mounting hardware and cabling for large ACTi camera arrays.
- Pre-selected components eliminate multi-vendor ordering and part number tracking.
- Scaled component quantities reduce job-site trips across enterprise installations.
$17,500.00 $17,499.99 Save $0.01The item has been added -
ACTi
SKU: LCMS2000
Acti LCMS2000 CMS License
CMS 2 channel license for up to 64 simultaneous playback streams
- Supports unlimited NVR servers across networked deployments
- H.264 compression for efficient video stream management
- Single-channel license module for ACTi CMS 2 platform
$55.00 $54.99 Save $0.01The item has been added -
ACTi
SKU: FLEX-STYLUS
ACTi Magnetic Flex Active MPP PEN W/ Palm Rejection - FLEX-STYLUS
- MPP active digitizer support enables precise annotation and PTZ control on compatible tablets.
- Palm rejection eliminates false inputs during extended monitoring sessions on touch surfaces.
- Magnetic mount secures the stylus to ferrous docking surfaces, keeping workstations organized.
$74.00 $73.99 Save $0.01The item has been added -
ACTi
SKU: BNDL-M
ACTi Medium Demployment Bundled KIT - BNDL-M
- Consolidates multi-camera components into one validated assembly for 10–50 camera sites.
- Pre-matched components reduce sourcing errors and simplify inventory staging at deployment.
- 2MP resolution support across bundled components suits standard surveillance coverage needs.
$9,300.00 $9,299.99 Save $0.01The item has been added -
ACTi
SKU: MEETCAM-SET
ACTi MEETCAM-SET Newline Meeting Camera
- 4K 30 fps capture at 120° FOV keeps all participants in frame without PTZ.
- 360° mic array with echo cancellation eliminates need for separate audio hardware.
- USB 3.0 connectivity supports Zoom, Teams, Webex, and Meet on Windows/macOS/Linux.
$1,349.00 $756.99 Save $592.01The item has been added -
ACTi
SKU: MGV00813
ACTi MGV00813
- ACTi-native integration ensures seamless pairing with compatible ACTi surveillance systems.
- Designed for professional security deployments meeting standard installation requirements.
- Consult the ACTi MGV00813 datasheet for full technical specifications before commissioning.
$99.00 $98.99 Save $0.01The item has been added -
ACTi
SKU: CTI-STAND-MINT
ACTi Mini Table Mobile Stand - CTI-STAND-MINT
- Tabletop mount eliminates drilling, enabling rapid repositioning without tools.
- Supports temporary or pilot deployments on desks, counters, and shelving.
- Designed for ACTi mini compact cameras; verify model compatibility before ordering.
$1,899.00 $1,694.99 Save $204.01The item has been added -
ACTi
SKU: PMAX-0114
ACTi Mount Kit for Dome Cameras (for A8x except A88) - PMAX-0114
- Secures ACTi A8x dome cameras to ceiling or wall surfaces in commercial deployments.
- Designed exclusively for A8x series; verify model compatibility — A88 is explicitly excluded.
- Use only specified fasteners to maintain camera stability and prevent video feed vibration.
$80.00 $79.99 Save $0.01The item has been added -
ACTi
SKU: DVINSTALL-MLTDSP
ACTi Multiple Displays Same Site (per - DVINSTALL-MLTDSP
- Per-display license scales multi-monitor deployments without additional server instances.
- Extends existing ACTi DVS infrastructure to support distributed same-site monitoring stations.
- Centralizes user permissions and view configurations across all display endpoints at one site.
$7,999.00 $4,856.99 Save $3,142.01The item has been added -
ACTi
SKU: EPR1B38LCS-000
ACTi Newline Launch Control & Workspace - EPR1B38LCS-000
- PCAP touch input supports precise multi-touch interaction on wall-mount deployments.
- HDMI, USB-C, USB, and Ethernet ports cover AV, data, and network in a single panel.
- Indoor-rated interactive display simplifies centralized operator workspace commissioning.
$199.00 $179.99 Save $19.01The item has been added -
Add to Cart The item has been added
ACTi
SKU: EPR8A60070-000
ACTi Newline Motorized Height Adjustable Mobile - EPR8A60070-000
- Motorized height adjustment enables repositioning mid-shift without interrupting monitoring.
- Mobile cart design supports rapid redeployment across control room or command post layouts.
- Lockable casters stabilize the display in position once placement is finalized.
$1,679.00 $958.99 Save $720.01The item has been added -
ACTi
SKU: DVINSTALL-PRO-SS1
ACTi Newline PRO - Turnkey Installation - - DVINSTALL-PRO-SS1
- End-to-end deployment covers mounting, cabling, PoE validation, and NVR setup.
- VMS commissioning and user configuration included, reducing internal IT workload.
- Scope and timeline set during initial consultation based on your hardware footprint.
$19,999.00 $12,147.99 Save $7,851.01The item has been added -
ACTi
SKU: EPR5A58803-000
ACTi Newline Rs+ Series Remote - EPR5A58803-000
- Enables PTZ pan, tilt, zoom, and preset control without a workstation or VMS.
- Reduces software licensing complexity in SOCs and dedicated control room deployments.
- Exclusive to ACTi Newline Rs+ Series; verify receiver and protocol version before ordering.
$119.00 $118.99 Save $0.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.