Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: KIT-IP61
STI KIT-IP61 Anchor Pack for STI-1200A Series
- Electrical strike activates at 9VDC for reliable credential-based door release control.
- Anchor pack form factor mounts directly to standard commercial door frames.
- Native compatibility with STI-1200A controllers simplifies HID reader integration.
$11.64 $10.99 Save $0.65The item has been added -
STI
SKU: KIT-KEM1
STI KIT-KEM1 Extra Key for KIT-KL1 Lock
- Drop-in spare for KIT-KL1 with no field reconfiguration required.
- Maintains HID credential ecosystem integration on existing card-based networks.
- Operates at 9VDC, matching KIT-KL1 power requirements for seamless pairing.
$18.80 $17.99 Save $0.81The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-KL1
STI KIT-KL1 Key-Lock Assembly HID Credential Strike
- Operates at 9VDC, integrating directly with HID card, fob, and proximity readers.
- Key-lock assembly provides mechanical override for emergency access without destructive entry.
- Designed for access control installs requiring both credential authentication and key backup.
$32.90 $31.99 Save $0.91The item has been added -
STI
SKU: KIT-L16200
STI KIT-L16200 Door Alarmed Warning Label for Exit Stopper
Visual alarm status label for STI exit stopper systems with HID access control
- 9VDC powered warning label integrates with lock/strike assemblies
- Compatible with STI exit stopper systems supporting HID credential readers
- Wall-mount installation for door alarmed status indication at exit points
$11.75 $10.99 Save $0.76The item has been added -
STI
SKU: KIT-M05050-A
STI KIT-M05050-A Translucent Amber Lens
- Amber lens delivers real-time visual door-unlock confirmation at 9VDC from the strike supply.
- TCP/IP communication integrates directly into existing IP-based access control infrastructure.
- HID credential compatibility ensures drop-in fit with standard enterprise access control platforms.
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-M05050-B
STI KIT-M05050-B Translucent Blue Lens Lock/Strike
9VDC translucent blue lens strike for access control door installations
- 9VDC operation integrates with standard access control systems
- Translucent blue lens provides visual feedback at entry points
- Wall-mount design fits standard door frame installations
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-M05050-G
STI KIT-M05050-G Translucent Green Lens Lock/Strike Kit
- TCP/IP communication enables remote lock control and status monitoring across multi-site deployments.
- 9VDC operation simplifies retrofit into existing door frame infrastructure without panel replacement.
- Translucent green lens gives installers and staff an unambiguous visual indication of strike state.
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-M05050-R
STI KIT-M05050-R Translucent Red Lens
- Operates at 9VDC, integrating directly into standard STI lock and strike power circuits.
- Translucent red polycarbonate lens delivers high-visibility status indication without external lighting.
- Mounts to compatible STI strike frames using standard hand tools and included hardware.
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-M05050-W
STI KIT-M05050-W Translucent White Lens Lock/Strike
- Operates on 9VDC, integrating directly with standard access control panel outputs.
- Translucent white lens provides visible lock-state feedback without disrupting aesthetics.
- Integrated lock/strike assembly simplifies wiring and reduces hardware count at the door.
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-M05101-EN
STI KIT-M05101-EN Red Housing Stopper II Series Fire Label
- Red polycarbonate housing prevents accidental or malicious fire call point activation.
- Optional integral sounder emits 120 dB alert when cover is lifted without authorization.
- Fits internal and external installations; mounts via four holes drilled with a 7mm bit.
$25.85 $24.99 Save $0.86The item has been added -
STI
SKU: KIT-M05501-A
STI KIT-M05501-A Select-Alert Replacement Lens Amber
- Drop-in amber lens replacement requires no rewiring or reconfiguration of existing fixtures.
- Compatible with Select-Alert devices in HID credential, TCP/IP-networked access control systems.
- Operates on 9VDC supply, delivering consistent amber indication across multi-door deployments.
$25.85 $24.99 Save $0.86The item has been added -
STI
SKU: KIT-M05501-B
STI KIT-M05501-B Select-Alert Replacement Lens Blue
Blue replacement lens for STI Select-Alert door strike systems at 9VDC
- Direct replacement lens assembly fits existing Select-Alert housings
- Operates at 9VDC for standard low-voltage door control infrastructure
- Visual status signaling for access control and door monitoring
$25.85 $24.99 Save $0.86The item has been added -
STI
SKU: KIT-M05501-C
STI KIT-M05501-C Select-Alert Replacement Lens Clear
- Clear lens maintains visual alert visibility in access control notification systems.
- Operates at 9V DC, matching standard STI Select-Alert power infrastructure.
- Drop-in replacement lens reduces downtime during Select-Alert system servicing.
$16.45 $15.99 Save $0.46The item has been added -
STI
SKU: KIT-M05603-A
STI KIT-M05603-A Replacement Lens for SA5600 - Amber
Amber lens replacement for SA5600 access readers with TCP/IP
- Direct drop-in replacement lens maintains optical clarity for HID credential
- 9VDC operation integrates with existing SA5600 series TCP/IP deployments
- Amber indicator lens assembly for visual status feedback in access control
$16.45 $15.99 Save $0.46The item has been added -
STI
SKU: KIT-M05603-B
STI KIT-M05603-B Replacement Lens for SA5600 - Blue
Blue replacement lens for STI SA5600 strike systems
- Direct swap for SA5600 door strike assemblies, 9VDC operation
- Extends equipment life without full system replacement
- Wall-mount installation with standard tools and basic technical skills
$16.45 $15.99 Save $0.46The item has been added -
STI
SKU: KIT-M05603-R
STI KIT-M05603-R Replacement Lens for SA5600 - Red
- Direct mechanical fit for SA5600-series locks and strikes — no firmware changes needed.
- Red lens restores degraded visibility on existing hardware, avoiding full device replacement.
- 9VDC-rated component; power down lock circuit before swap to prevent accidental door release.
$16.45 $15.99 Save $0.46The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.