Code Blue

SKU: SLNF16170-03

Code Blue SLNF16170-03 CB 1-s AED Housing Lime Green

IP68 PoE-powered AED housing for outdoor & indoor PAD deployment

• IP68 dust and water immersion protection for reliable outdoor mounting
• PoE (802.3af) power eliminates dedicated electrical lines during install
• Lime green color maximizes visibility for emergency responders in high-traffic areas

Code Blue

SKU: 41596

Code Blue Trim Ring IP2501/IA501 BS CC - 41596

• Direct-fit bezel for IP2501 and IA501 speakerphones; no adapter plates required.
• Single SKU supports wall, pole, recessed, and rack installations without modification.
• Passive mechanical component; no wiring or network connections needed to install.

Code Blue

SKU: 41597

Code Blue Trim Ring IP5000/IA4100 BS CC - 41597

• Fits IP5000 VoIP and IA4100 analog faceplates; verify bolt pattern before ordering.
• Supports both surface-mount and recessed wall installations with no extra hardware.
• Conceals installation gaps and fastener heads for a clean, finished deployment.

Code Blue

SKU: Z15959-20

Code Blue Z15959-20 CB 2 with AED Housing Custom Unit

• PoE 802.3af power eliminates dedicated electrical runs, simplifying single-cable deployment.
• CB 2 form factor with AED housing supports integrated emergency response infrastructure.
• Fits standard IP security ecosystems for access control and emergency notification workflows.

Comelit

SKU: 4793MA

Comelit 4793MA Aluminium Faceplate for Quadra W/Buttons

Aluminium faceplate replacement for Comelit Quadra intercom systems

• Aluminium housing resists minor impacts in lobby and entrance installations.
• Integrates mechanical buttons directly, ensuring clean contact with Quadra PCB.
• Wall-mount design enables straightforward swap on existing Quadra panel assemblies.

Comelit

SKU: UT9171

Comelit UT9171 Surface-Mounted Wall Housing for Ultra Series

Surface-mount wall housing for Comelit Ultra Series with PoE+ power

• PoE+ (802.3at) support combines data and power on one cable, cutting retrofit labor.
• Surface-mount form factor installs directly on any flat wall without in-wall rough-in.
• Sized at 4.33" × 4.21" × 1.38", it fits tight corridors while housing Ultra Series units.

Comelit

SKU: UT9171B

Comelit UT9171B Surface-Mounted Thermal Camera Housing

Surface-mount thermal housing with PoE+ power, no recessed wiring

• PoE+ (802.3at) power delivery eliminates separate power runs at each camera drop.
• Surface-mount form factor installs on drywall, brick, or concrete with no cutouts.
• Compact 4.33" × 4.21" × 1.38" footprint fits tight wall spaces in retrofit jobs.

Comelit

SKU: UT9172

Comelit UT9172 Surface-Mounted Wall Housing for 2MP Ultra

Surface-mounted 2MP housing for Comelit Ultra cameras, PoE+ powered

• PoE+ (802.3at) draws power from network, no 12VDC injector at wall
• Surface-mount wall housing for 2MP (1920x1080) Ultra entrance panels
• Compact 110 x 198 x 35 mm profile for tight retrofit wall mounting

Comelit

SKU: UT9172B

Comelit UT9172B Surface-Mounted Housing 2 Ultra Modules

Surface-mounted thermal housing for 2 ultra modules with PoE+ power

• At 35 mm deep, installs over existing conduit runs with minimal wall impact.
• Screw-free module retention speeds commissioning and prevents over-torqued tabs.
• Die-cast aluminum frame with cataphoresis treatment resists corrosion and UV wear.

Comelit

SKU: UT9173

Comelit UT9173 Surface-Mounted Wall Housing for Ultra Series

Surface-mount housing for three Comelit Ultra intercom units

• Consolidates three Ultra-series intercom units into one 110×289mm surface-mount frame.
• Each unit draws PoE+ (802.3at) power independently—no separate power runs required.
• Simplebus 2 audio/video with integrated power simplifies single-cable wiring per unit.

Comelit

SKU: UT9173B

Comelit UT9173B Surface-Mounted Housing 3 Ultra Modules

Three thermal modules in one surface-mount housing, powered by PoE+

• Consolidates three ultra thermal modules into one wall-mount, cutting wall penetrations.
• Single PoE+ (802.3at) feed powers all three modules, eliminating local power supplies.
• Compact 4.33" × 11.38" × 1.38" surface-mount profile deploys without structural modification.

Comelit

SKU: UT9174

Comelit UT9174 Surface-Mounted Wall Housing

Surface-mount 4MP housing with PoE+ power for quick wall installation

• Surface-mount wall design eliminates cutting or recessing, speeding up retrofit installs.
• PoE+ (802.3at) support delivers power over a single Ethernet run—no separate power drops.
• Supports 2560×1440 (4MP) camera systems with Simplebus 2 audio/video integration.

Comelit

SKU: UT9174B

Comelit UT9174B Surfaced-Mounted Housing 4 Ultra Module

Wall-mounted 4-module housing for PoE+ thermal imaging deployments

• Holds four Ultra-series modules in a slim 35 mm wall projection, reducing snag risk.
• Die-cast aluminum frame with cataphoresis coating resists corrosion, UV, and chemicals.
• PoE-compatible design eliminates separate power runs for each installed Ultra module.

Comelit

SKU: UT9174H

Comelit UT9174H Wall Housing 2X2 Ultra Modules

Wall-mounted 2X2 ultra module housing for Comelit intercom systems

• Surface-mount 2×2 housing fits four Ultra modules in a 35mm wall depth.
• Die-cast aluminium frame with cataphoresis treatment resists UV and corrosion.
• PoE-compatible module chain eliminates separate power runs to the entry panel.

Comelit

SKU: UT9176

Comelit UT9176 Surface-Mounted Wall Housing

Surface-mounted wall housing for Comelit 6 Ultra intercoms

• Surface-mount housing for 6 Ultra modules in a 2x3 arrangement
• Removes need for recessed in-wall back boxes on retrofit installs
• 8.82 lb wall-mount housing made in Italy with 2-year warranty

Comelit

SKU: UT9178

Comelit UT9178 Surface-Mounted Wall Housing for 8 Ultra

Surface-mount wall housing for Comelit 8 Ultra intercoms with PoE+

• Surface-mount wall housing for 8 Ultra entrance panel modules
• 221 x 380 x 35 mm form factor for direct flat-wall installation
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels