IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Digi International

SKU: 76000735

Digi International 76000735 12VDC 0.5A Power Adapter

Dual-voltage 12VDC 0.5A wall adapter for global Digi device deployments
- 120-240VAC universal input eliminates regional power supply sourcing
- 12VDC 0.5A output rated for serial servers and console device integration
- Compact wall-mount form factor with FCC/UL certifications for OEM use
Special Order · Ships in 2-3 weeks

$37.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000736

Digi International 76000736 12VDC/120-240VAC Extended

12VDC power supply, 120-240VAC input, -35°C to 74°C operation
- Extended temperature range (-35°C to 74°C) for outdoor and uncontrolled environments
- Universal AC input (120-240VAC) supports global and varied facility power standards
- Compatible with Digi networking and edge computing platforms; UL/CE certified
Special Order · Ships in 2-3 weeks

$93.99 $89.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000738

Digi International 76000738 12VDC/90-264VAC Wall Mount Power

Wall-mount 12VDC supply, universal 90–264VAC input for global use
- Delivers 12VDC output for Digi networking and gateway devices worldwide
- Accepts 90–264VAC input; works across North American and international circuits
- Compact wall-mount form factor fits equipment racks and network enclosures
Special Order · Ships in 2-3 weeks

$52.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000752

Digi International 76000752 12VDC/100-240VAC Extended

12VDC industrial power supply, 100-240VAC input, -35°C to 74°C
- Universal 100-240VAC input handles global standards and unstable grids
- Extended temperature range -35°C to 74°C for outdoor and non-climate controlled
- Dual-input design for industrial networking, telecom, and security systems
Special Order · Ships in 2-3 weeks

$93.99 $89.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000756

Digi International 76000756 DIN Rail Bracket Kit

Stainless steel DIN rail bracket kit for Digi device cabinet mounting
- Mounts Digi-compatible devices directly to standard DIN rail infrastructure
- Stainless steel construction resists corrosion in industrial control cabinets
- Modular standardized design simplifies installation in telecom and security setups
Special Order · Ships in 2-3 weeks

$20.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000769

Digi International 76000769 AC Power Cord US to IEC

US to IEC C13 AC power cord for Digi networking equipment
- IEC C13 connector compatible with Digi International devices
- Standard AC power cord for networking and telecom installations
- Replacement cord for infrastructure deployments requiring US outlet
Special Order · Ships in 2-3 weeks

$18.99 $17.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76000842

Digi International 76000842 GPS Antenna with Magnet Mount

Magnetic-mount GPS antenna for Digi cellular gateways
- 1575 MHz GPS receiver with 28 dB gain for positioning and timing
- Magnet mount attaches to metal surfaces without permanent installation
- Compact 9.0 x 7.0 in footprint weighs 0.24 lbs for mobile deployment
In stock · Ships same business day

$34.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000912

Digi International 76000912 ConnectTank Replacement Battery

OEM replacement battery for Digi ConnectTank backup power
- Genuine Digi component maintains uninterrupted operation in remote deployments
- Fits standard ConnectTank systems without modification or compatibility issues
- Compact 4.5 x 6.5 x 2.5 in design weighs 0.68 lbs for easy handling
Special Order · Ships in 2-3 weeks

$74.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000926

Digi International 76000926 Indoor SMA Male 3dBi Antenna

Indoor SMA antenna with 3dBi gain for compact wireless deployments
- 3dBi gain supports 3G/4G/LTE across 699–2690 MHz frequency range
- Compact 196mm height fits space-constrained indoor installations
- SMA male connector integrates directly with Digi wireless systems
Special Order · Ships in 2-3 weeks

$10.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000954

Digi International 76000954 Antenna Base Connector

SMA female antenna base connector for Digi wireless devices
- Mechanical and electrical interface for Digi networking hardware
- Black antenna base assembly with integrated connector interface
- Compatible with security, telecom, and industrial networking systems
Special Order · Ships in 2-3 weeks

$30.99 $28.99 Save $2.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000956

Digi International 76000956 XBee TH Grove Development Board

Grove-compatible dev board for XBee TH wireless mesh networks
- Works with XBee TH modules for temperature & humidity IoT sensing
- Grove connectors enable rapid sensor attachment without custom wiring
- Compact form factor (3.2 x 0.2 in) for field testing & prototyping
Special Order · Ships in 2-3 weeks

$25.99 $24.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000958

Digi International 76000958 ConnectPort TS 16 19-Inch Replacement

19-inch rack-mount replacement for ConnectPort TS 16 terminal servers
- 16 serial ports for connecting legacy serial devices in data center environments
- Standard 19-inch rack form factor integrates directly into existing server racks
- Field replacement module compatible with ConnectPort TS 16 deployments
Special Order · Ships in 2-3 weeks

$32.99 $30.99 Save $2.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000960

Digi International 76000960 Indoor Antenna

Indoor antenna for LTE/4G/3G networks, -40°C to 85°C operation
- LTE/4G/3G support at 410/450 MHz with SMA male connector
- Operates reliably from -40°C to 85°C in heated and unheated spaces
- Compact 109 x 10 mm form factor with ABS housing for infrastructure
Special Order · Ships in 2-3 weeks

$11.99 $10.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76000965

Digi International 76000965 Power Supply for AnywhereUSB 2 Plus

5VDC power supply for AnywhereUSB 2 Plus remote connectivity
- Compact 118 x 54 x 37 mm form factor fits tight installation spaces
- Operates reliably across -30°C to +70°C for indoor/outdoor deployments
- UL, cUL, and CE certified for safe networked USB-over-IP installations
In stock · Ships same business day

$77.99 $74.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002084

Digi International 76002084 WR54 Accessory Kit - Single Cellular

Single cellular module kit for WR54 industrial routers—remote sites & failover
- Cellular connectivity components for WR54 deployment in remote or backup link roles
- Field-ready integration kit supports primary, failover, and remote site applications
- Compatible with WR54 industrial router platforms for telecommunications installations
Special Order · Ships in 2-3 weeks

$371.99 $355.99 Save $16.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002085

Digi International 76002085 AC/DC Power Supply 12VDC

12VDC regulated power supply for Digi networking equipment
- AC/DC conversion delivers stable 12VDC for continuous operation
- Rated for industrial, commercial, cabinet, and rack installations
- Compatible with Digi networking and telecommunications appliances
Special Order · Ships in 2-3 weeks

$411.99 $393.99 Save $18.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Digi International 76000735 12VDC 0.5A Power Adapter

Digi International 76000736 12VDC/120-240VAC Extended

Digi International 76000738 12VDC/90-264VAC Wall Mount Power

Digi International 76000752 12VDC/100-240VAC Extended

Digi International 76000756 DIN Rail Bracket Kit

Digi International 76000769 AC Power Cord US to IEC

Digi International 76000842 GPS Antenna with Magnet Mount

Digi International 76000912 ConnectTank Replacement Battery

Digi International 76000926 Indoor SMA Male 3dBi Antenna

Digi International 76000954 Antenna Base Connector

Digi International 76000956 XBee TH Grove Development Board

Digi International 76000958 ConnectPort TS 16 19-Inch Replacement

Digi International 76000960 Indoor Antenna

Digi International 76000965 Power Supply for AnywhereUSB 2 Plus

Digi International 76002084 WR54 Accessory Kit - Single Cellular

Digi International 76002085 AC/DC Power Supply 12VDC

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading