IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Pelco

SKU: SRXP4-LD-0I

Pelco SRXP4-LD-0I Smoked Lower Dome for Sarix Pro 4

Smoked dome for Sarix Pro 4 indoor cameras—obscures lens direction
- Smoked polycarbonate reduces light transmission while maintaining image quality
- IK09 impact rating withstands 20-joule vandal strikes indoors
- Direct fit replacement for Sarix Pro 4 indoor dome camera body
In stock · Ships same business day

$35.00 $25.99 Save $9.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXP4-LD-1E

Pelco SRXP4-LD-1E Clear Lower Dome Sarix Pro 4

Clear replacement dome for Sarix Pro 4 with IK09 vandal protection
- Clear polycarbonate window maximizes light transmission for optimal image quality
- IK09 vandal rating withstands high-impact environments and physical contact
- Outdoor-rated design protects camera optics from dust, contamination, and weather
Special Order · Ships in 2-3 weeks

$35.00 $25.99 Save $9.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXP4-LD-1I

Pelco SRXP4-LD-1I Clear Lower Dome for Sarix Pro 4

Clear lower dome for Sarix Pro 4 indoor cameras with optical-grade protection
- Optical-grade polycarbonate maximizes light transmission to sensor
- Protects lens assembly from dust, debris, and physical contact
- Designed exclusively for Sarix Pro 4 indoor dome installations
Special Order · Ships in 2-3 weeks

$35.00 $25.99 Save $9.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXP4-PM-1E

Pelco SRXP4-PM-1E Pendant Mount for Sarix Pro 4 Dome

Pendant mount for Sarix Pro 4 dome cameras on conduit or pipe
- Engineered fit eliminates shimming and micro-vibration for sharp images
- Integrated cable routing through arm protects wiring from damage and snagging
- Accepts standard 1/2" or 3/4" conduit drops and rigid pendant pipe
In stock · Ships same business day

$46.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-CM

Pelco SRXV-CM Corner Mount Bracket Sarix Value

90-degree corner mount for Sarix Value dome and bullet cameras
- Covers two adjacent walls from one corner installation, reducing camera count
- IP66 / NEMA 4X rated for outdoor and harsh-condition deployments
- Works with SRXV wall mount interface and ONVIF-compatible systems
Special Order · Ships in 2-3 weeks

$197.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-PCF

Pelco SRXV-PCF Ceiling Flange Cover Sarix Value

Ceiling flange cover for Sarix Value pendant pipe cameras
- Closes gap between pipe and ceiling to eliminate dust buildup
- Commercial-grade construction for retail, office, and industrial settings
- NDAA Section 889 compliant for government security deployments
Special Order · Ships in 2-3 weeks

$204.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV-PLM

Pelco SRXV-PLM Pole Pipe Mount for Sarix Value Cameras

Universal pole mount for dome and bullet cameras, NDAA compliant
- Clamps securely to cylindrical poles, pipes, and posts without wall penetrations
- Single SKU accepts both dome and bullet form factors for mixed deployments
- No electronics or power required—mechanical installation on Sarix Value cameras
In stock · Ships same business day

$133.56 $94.99 Save $38.57

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-PP

Pelco SRXV-PP Pipe Extension Pendant Sarix Value

Threaded pipe extension for Sarix Value pendant cameras—NDAA compliant
- Direct threaded integration with no adapters required for fast installation
- Extends pendant drop for high-bay warehouses and double-height spaces
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$92.38 $67.99 Save $24.39

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-WMP

Pelco SRXV-WMP Wall Mount Sarix Value Pendant Camera

Wall-mount pendant for Sarix Value cameras in corridors and covered areas
- Horizontal arm extension from wall surfaces for non-ceiling installations
- Surface-mount design with IMV-WMJB junction box compatibility for weatherproof cable routing
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$62.33 $45.99 Save $16.34

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV-WMS

Pelco SRXV-WMS Wall Mount for Sarix Value Dome

Wall mount for Pelco Sarix Value dome cameras with IK09 vandal rating
- Supports multiple Sarix Value camera series in single mount bracket
- Wall and corner deployment options for flexible installation geometry
- IK09 impact resistance rated for commercial and industrial environments
In stock · Ships same business day

$103.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-ADPT-1001

Pelco SRXV2-ADPT-1001 Adapter Plate for Sarix Value 2

Mounting adapter plate for Pelco Sarix Value 2 dome cameras
- SRXV2-specific hole pattern aligns camera to ceiling cutouts and brackets
- OEM-quality construction supports secure mechanical retention on mount surfaces
- Bridges dimensional gaps between camera body and target mounting interface
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-CRNMT-1001

Pelco SRXV2-CRNMT-1001 Corner Mount Bracket

90-degree corner mount for Pelco Sarix Value 2 dual-wall coverage
- Steel construction with IP66 weatherproof rating for outdoor deployment
- Single mount point covers two adjacent walls and corner area efficiently
- Designed for Sarix Value 2 cameras with corrosion-resistant finish
Special Order · Ships in 2-3 weeks

$120.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-FCMNT-1002

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Flush in-ceiling mount for Pelco SRXV2 dome cameras, NDAA compliant
- Recessed design integrates camera flush with ceiling for clean architectural look
- OEM-engineered geometry interface built specifically for SRXV2 indoor dome cameras
- NDAA Section 889 compliant for federal and government installations
Special Order · Ships in 2-3 weeks

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV2-JBX-1001

Pelco SRXV2-JBX-1001 Indoor Junction Box

Indoor junction box for Pelco Sarix Value 2 dome cameras
- Organizes cable slack and protects RJ45 connectors from disconnection
- Designed for ceiling and wall-mounted installations with clean appearance
- Simplifies future camera replacements and maintenance workflows
In stock · Ships same business day

$110.25 $100.99 Save $9.26

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1002

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Weather-sealed junction box for Sarix Value 2 outdoor bullets
- Protects Ethernet and PoE Class 3 connections from moisture and UV
- Downward cable entry minimizes moisture ingress at exposed points
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$102.00 $75.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV2-JBX-1003

Pelco SRXV2-JBX-1003 Outdoor Junction Box

IP66 weather-sealed junction box for outdoor Sarix Value 2 cameras
- IP66 rating protects Ethernet and PoE+ cable terminations from moisture
- Designed for dome camera installations on rooftops and exterior walls
- NDAA Section 889 compliant for regulated surveillance deployments
In stock · Ships same business day

$162.75 $113.99 Save $48.76

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco SRXP4-LD-0I Smoked Lower Dome for Sarix Pro 4

Pelco SRXP4-LD-1E Clear Lower Dome Sarix Pro 4

Pelco SRXP4-LD-1I Clear Lower Dome for Sarix Pro 4

Pelco SRXP4-PM-1E Pendant Mount for Sarix Pro 4 Dome

Pelco SRXV-CM Corner Mount Bracket Sarix Value

Pelco SRXV-PCF Ceiling Flange Cover Sarix Value

Pelco SRXV-PLM Pole Pipe Mount for Sarix Value Cameras

Pelco SRXV-PP Pipe Extension Pendant Sarix Value

Pelco SRXV-WMP Wall Mount Sarix Value Pendant Camera

Pelco SRXV-WMS Wall Mount for Sarix Value Dome

Pelco SRXV2-ADPT-1001 Adapter Plate for Sarix Value 2

Pelco SRXV2-CRNMT-1001 Corner Mount Bracket

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Pelco SRXV2-JBX-1001 Indoor Junction Box

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Pelco SRXV2-JBX-1003 Outdoor Junction Box

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading