IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: FC05-001256A

Hanwha FC05-001256A Wall Mount for XNO6080R

Wall mount bracket sized for XNO6080R camera installation
- Steel construction with corrosion-resistant finish for interior/exterior use
- OEM Hanwha accessory engineered specifically for XNO6080R compatibility
- Vertical surface mounting reduces structural load vs. ceiling alternatives
Special Order · Ships in 2-3 weeks

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC09-008186A

Hanwha FC09-008186A Ceiling Bracket for XNO6020R

Ceiling bracket for XNO6020R with integrated hardware for drop/solid ceilings
- Metal construction mount designed specifically for Hanwha XNO6020R cameras
- Works with drop ceiling and solid ceiling installations with included hardware
- Weighs 7.14 lb and supports stable, vibration-resistant overhead positioning
Special Order · Ships in 2-3 weeks

$35.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC15-002626A

Hanwha FC15-002626A Optical Cover for SNP6320

Optical cover for SNP6320 with lens protection and weatherproofing
- Precision-engineered optical glass shields lens from dust, debris, and precipitation
- Official Hanwha OEM component for exact fit and optical compatibility
- Purpose-built for outdoor and harsh-environment surveillance installations
Special Order · Ships in 2-3 weeks

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC15-002790B

Hanwha FC15-002790B Polycarbonate Dome Cover V2

Polycarbonate dome cover for Hanwha V2 cameras, ceiling and wall mount
- Direct replacement housing requires no additional hardware or structural mods
- Transparent polycarbonate construction resists impact and weather exposure
- Compatible with ONVIF network cameras in retrofit and new V2 deployments
Special Order · Ships in 2-3 weeks

$19.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC15-005078A

Hanwha FC15-005078A Glass Cover for IR Dome

OEM optical glass dome cover for Hanwha PNF-9010RVM IR cameras
- Optical glass construction maintains IR light transmission for night vision
- Genuine Hanwha replacement part designed for PNF-9010RVM series compatibility
- Protective dome form factor for indoor and sheltered outdoor installations
Special Order · Ships in 2-3 weeks

$5.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC15-008623B

Hanwha FC15-008623B Dome Camera Cover

Hard polycarbonate dome cover for Hanwha PNM-A7083RVD cameras
- Impact, dust, moisture, and UV resistant polycarbonate construction
- Transparent optical design maintains full IR transmission and image clarity
- Direct-fit installation with no modifications required for PNM-A7083RVD
Special Order · Ships in 2-3 weeks

$35.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC15-009345A

Hanwha FC15-009345A Clear Dome Cover 90mm

Clear 90mm dome cover for standard surveillance housings with minimal optical loss
- 90mm clear polycarbonate dome shields cameras from dust and debris without image degradation
- Compatible with Hanwha and ONVIF-compliant third-party dome camera installations
- Direct mechanical mount to standard dome housings—no hardware modifications required
Special Order · Ships in 2-3 weeks

$36.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC18-004000A

Hanwha FC18-004000A M4 Special Screw

M4 stainless steel screw for Hanwha security camera mounting
- M4 diameter with L7+5mm length sized for Hanwha system compatibility
- Stainless steel (SUS) construction resists corrosion in outdoor installations
- Phillips head drive with FP finish protection for reliable, long-term performance
Special Order · Ships in 2-3 weeks

$0.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: FC39-007065A

Hanwha FC39-007065A Stainless Steel Mount Plate

Stainless steel mount plate for Hanwha QNV-C8083R outdoor installations
- SUS stainless steel construction resists corrosion in moisture-prone environments
- Wall and ceiling mounting flexibility for diverse surveillance deployments
- Compatible with Hanwha QNV-C8083R camera systems
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: HCB-6000

Hanwha HCB-6000 2MP HD+ Box Camera

Compact 2MP HD+ box camera with 120dB WDR for mixed lighting
- 1080p at 30fps with 120dB true WDR to handle high-contrast scenes
- Motorized day/night ICR filter switches automatically for optimal color/B&W
- CS-mount lens design; 24VAC or 12VDC dual power inputs for flexible install
In stock · Ships same business day

$180.00 $134.99 Save $45.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HCB-6001

Hanwha HCB-6001 2MP HD+ Box Camera

Full HD 1080p box camera with 120dB WDR for hybrid analog networks
- 2MP at 30fps across AHD, TVI, CVI, and CVBS formats over 500m coax
- 120dB true WDR handles backlit and high-contrast scenes with balanced exposure
- 0.09 Lux color / 0.009 Lux B&W low-light performance with internal IR cut filter
Special Order · Ships in 2-3 weeks

$215.00 $161.99 Save $53.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: HNW-SS-800

Hanwha HNW-SS-800 Ceiling Mounted Microphone

Ceiling microphone with 12-foot omnidirectional pickup for synchronized audio
- 60dB signal-to-noise ratio captures clear dialogue without hum or distortion
- Line-level output at 2.2kΩ impedance connects directly to IP cameras and NVRs
- Recessed 3 1/8" mount fits standard ceiling knockouts with minimal visibility
In stock · Ships same business day

$330.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: HNW-SS-806

Hanwha HNW-SS-806 Line Level Wall Microphone

Flush-mount line-level mic for secure facilities with 12-ft omni coverage
- 12-gauge stainless steel anti-ligature construction with zero protrusions
- Omni-directional pickup across ~12-foot radius eliminates dead zones
- Line-level output (2.2kΩ) mounts flush to wall or ceiling
In stock · Ships same business day

$350.00 $234.99 Save $115.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HP07-001568A

Hanwha HP07-001568A Gasket Bottom for XNF-9010RV

OEM gasket bottom for XNF-9010RV outdoor camera housing
- Elastomer sealing compound maintains IP-rated environmental protection
- Designed for outdoor and vandal-resistant security installations
- Replacement gasket restores weatherproof enclosure integrity
Special Order · Ships in 2-3 weeks

$3.74 $2.99 Save $0.75

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-E-BFP00CL

Hanwha HT-E-BFP00CL Pole Adaptor for Explosion-Proof Cameras

Stainless steel pole mount for Hanwha explosion-proof cameras
- Stainless steel construction resists corrosion in hazardous environments
- Pole adaptor supports flexible installation on varying diameter poles
- Purpose-built for ATEX-regulated indoor and outdoor industrial sites
Special Order · Ships in 2-3 weeks

$1,550.00 $1,039.99 Save $510.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-E-BFP00SW

Hanwha HT-E-BFP00SW Explosion Proof Camera Bracket

Stainless steel top mount bracket for explosion-proof camera installation
- Stainless steel construction resists corrosion in hazardous environments
- Top mounting design enables overhead installation with precise angle positioning
- Compatible with Hanwha and third-party explosion-proof camera models
Special Order · Ships in 2-3 weeks

$775.00 $519.99 Save $255.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha FC05-001256A Wall Mount for XNO6080R

Hanwha FC09-008186A Ceiling Bracket for XNO6020R

Hanwha FC15-002626A Optical Cover for SNP6320

Hanwha FC15-002790B Polycarbonate Dome Cover V2

Hanwha FC15-005078A Glass Cover for IR Dome

Hanwha FC15-008623B Dome Camera Cover

Hanwha FC15-009345A Clear Dome Cover 90mm

Hanwha FC18-004000A M4 Special Screw

Hanwha FC39-007065A Stainless Steel Mount Plate

Hanwha HCB-6000 2MP HD+ Box Camera

Hanwha HCB-6001 2MP HD+ Box Camera

Hanwha HNW-SS-800 Ceiling Mounted Microphone

Hanwha HNW-SS-806 Line Level Wall Microphone

Hanwha HP07-001568A Gasket Bottom for XNF-9010RV

Hanwha HT-E-BFP00CL Pole Adaptor for Explosion-Proof Cameras

Hanwha HT-E-BFP00SW Explosion Proof Camera Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading