Speco Technologies 8CH Wall Mount NU Monitor 3TB TAA - N8WNUM3TB

Speco Technologies N8WNUM3TB 8-Channel Wall Mount NVR with Monitor and Storage

Overview

The N8WNUM3TB is an 8-channel wall-mount network video recorder bundled with a dedicated monitor and 3TB onboard storage. This is a complete surveillance package designed for retail floors, small office spaces, and light commercial sites where space is tight and you need recording, display, and storage in one wall-mounted footprint. The monitor is integrated into the unit, eliminating the need for separate display hardware and simplifying cable runs.

Compatibility

The N8WNUM3TB supports standard IP camera inputs via Ethernet (PoE-capable network connections). It works with any ONVIF-compliant IP camera, including models from Axis, Hikvision, Dahua, Hanwha, and other mainstream vendors. The recorder accepts up to 8 simultaneous video streams. Verify your camera's resolution and frame rate against the recorder's codec support to avoid bottlenecking — most modern IP cameras (1MP to 4K) integrate without issue, but high-frame-rate or unusual codec configurations should be tested before full deployment.

Installation Notes

Mount the unit securely to a vertical surface capable of supporting its weight. Ensure adequate ventilation around the recorder to prevent thermal buildup — avoid enclosed cabinets without forced airflow. Connect camera feeds via standard Ethernet (PoE injectors or PoE switch required if the unit does not provide inline PoE). Route power to a grounded outlet. Allow time for the system to boot and initialize the 3TB storage on first use. Network configuration (IP assignment, camera discovery) is performed via the integrated monitor or remote access — refer to manufacturer documentation for exact steps.

What's in the Box

• 8-channel wall-mount NVR with integrated 3TB hard drive
• Integrated monitor (display size and resolution per manufacturer specification)
• Power cable
• Ethernet cable
• Wall mounting bracket