Geovision 84-CB550F3-UA00 IP Camera Cable
Overview
The Geovision 84-CB550F3-UA00 is a 4-foot integrated IP camera cable designed to deliver both network data and power to compatible Geovision surveillance cameras in a single conduit run. This consolidation eliminates the need for separate Ethernet and power drops — a practical advantage in retrofit installations, fixed wall layouts, and camera arrays where cable tray or conduit space is constrained. The PoE-compatible design supports standard power delivery methods, reducing installation labor and simplifying troubleshooting by replacing two separate runs with one.
Compatibility
This cable integrates with Geovision IP camera systems and compatible Geovision camera models. Connector type and pin configuration are manufacturer-specific; verify your camera model's technical documentation or consult the integrator who specified your system before purchase. Confirm whether your camera supports PoE, hybrid power, or proprietary power delivery — connector mismatch or power incompatibility is the most common installation failure and cannot be reversed without rework.
Installation Notes
Route this cable through conduit or cable trays rated for both network and power applications. Avoid parallel runs alongside high-voltage lines or unshielded industrial equipment that may induce noise on the data or power conductors. Secure the cable at regular intervals — typically every 3–4 feet horizontally and every 2 feet vertically — to prevent mechanical stress at connectors. Keep cable tension below manufacturer limits to avoid internal conductor breakage. Test continuity and power delivery at the camera end before final securing; a failed connection discovered after wall closure or infrastructure sealing creates expensive rework. For outdoor or damp installations, use weatherproof connectors or junction boxes rated for your environment.
