Middle Atlantic 5/8 THREADED ROD6ft. L1PC - CLH-5/8ROD-6

Middle Atlantic CLH-5/8ROD-6 Cable Ladder Threaded Rod

The Middle Atlantic CLH-5/8ROD-6 is a 5/8-inch threaded rod cut to a 6-foot length, designed as a structural suspension component for Middle Atlantic cable ladder systems. Each package ships as a single rod — the right quantity for a targeted repair, a partial run extension, or a matched replacement when one section of a suspended ladder install needs a new drop point. If you've priced out threaded rod at a hardware house and found it undersized or non-standard, this is the part that fits the CLH cable ladder family without guesswork.

Key Features

• 5/8-Inch Thread Diameter: Matches the hardware spec for Middle Atlantic CLH-series cable ladder hangers — the correct thread diameter means no improvised adapter hardware or thread-chasing in the field. Use the right rod from the start and avoid the rework.
• 6-Foot Length (72 inches): Provides a full 6 ft of drop from overhead structure to ladder tray, accommodating typical above-ceiling plenum clearances in commercial data centers, telecom rooms, and security head-end closets. Cut to length on-site if your drop is shorter; the rod ships full-length so you have material to work with.
• Single-Piece Packaging (Qty 1): Sold individually, so you can order the exact count needed for a specific number of suspension points rather than buying a multi-pack with leftover stock. Order multiples to match your hanger count per run.
• Commercial-Grade Construction: Ships at 7 lbs (3.2 kg) per unit — the weight reflects solid-steel rod stock appropriate for the structural load requirements of a loaded cable ladder carrying bundled security, network, or AV cabling.

Integration & Compatibility

The CLH-5/8ROD-6 is a component within the Middle Atlantic cable ladder product line. It pairs with CLH-series cable ladder sections and the corresponding hanger/coupling hardware that accepts 5/8-inch rod. If you are building out a new overhead cable ladder run or extending an existing one in a structured cabling installation, confirm your hanger hardware matches the 5/8-inch rod diameter before ordering. This rod is not interchangeable with 3/8-inch or 1/2-inch threaded rod suspension systems.

Typical deployment contexts include security system head-end rooms, IDF/MDF closets, and above-ceiling cable routing in commercial buildings where a suspended cable ladder replaces cable tray or J-hooks for organized, accessible routing of bulk cabling.

What's in the Box

• 1x Middle Atlantic CLH-5/8ROD-6 threaded rod (5/8 in diameter, 6 ft length)

Frequently Asked Questions

Q: What thread diameter is the CLH-5/8ROD-6?

A: The CLH-5/8ROD-6 uses a 5/8-inch thread diameter, matching the hanger hardware in Middle Atlantic's CLH cable ladder series.

Q: How long is the CLH-5/8ROD-6 rod?

A: The rod is 6 feet (72 inches) in length. It can be cut to a shorter drop if your installation requires less clearance between the overhead structure and the cable ladder.

Q: How many rods are included per order?

A: One rod is included per package. Order the quantity that matches your number of suspension points for a given ladder run.

Q: What does the CLH-5/8ROD-6 weigh?

A: The shipping weight is 7 lbs (3.2 kg) per unit, consistent with solid-steel commercial rod stock.

Q: Is the CLH-5/8ROD-6 compatible with non-Middle Atlantic cable ladder systems?

A: Compatibility depends on whether the receiving hanger hardware is designed for 5/8-inch threaded rod. Verify your existing hanger spec before mixing systems — Middle Atlantic CLH hardware is designed around this rod diameter.

Jerry Tildsen

The CLH-5/8ROD-6 is one of those parts that looks trivial until you're on a ladder in a telecom room at the end of a run and realize you ordered the wrong rod diameter. The 5/8-inch spec is not universal — it's specific to Middle Atlantic's CLH suspension hardware, and substituting undersized rod causes hanger slop that shifts the whole ladder under load. Get the right part number: CLH-5/8ROD-6, one rod, 6 feet.

Technical Highlights:

• 6-Foot Length: Gives you the full drop range for most above-ceiling commercial installations without splicing — any shorter and you'd be coupling rods together, which adds hardware cost and a potential weak point.
• 5/8-Inch Thread Diameter: The CLH hanger family is designed around this spec. Using 1/2-inch rod in a 5/8-inch hanger leaves a gap that allows lateral movement; using the correct diameter locks the hanger tight against the rod with no shimming.
• 7 lb Shipping Weight: Indicates solid steel rod stock — not hollow or undersized stock — appropriate for the distributed load of a fully populated cable ladder carrying bundled security, network, or AV cabling across a commercial head-end room.

Deployment Considerations:

• Order one rod per suspension point on the ladder run. For a typical 10-foot ladder section with hangers at each end, that's two rods minimum — don't undercount and make a second trip to the supplier.
• At 6 feet per rod, you have material to cut down for shorter drops, but there is no way to extend a rod that's already been cut short — measure your drop from the overhead structure to the desired ladder elevation before cutting.

This rod is the right call for a commercial security or AV head-end build-out using Middle Atlantic CLH cable ladder — particularly in retrofit installs where matching an existing 5/8-inch suspension system is non-negotiable.