CyberPower PDU30MVT24F Metered Power Distribution Unit
The CyberPower PDU30MVT24F is a 24-outlet, 0U vertical metered power distribution unit designed for wall-mount, horizontal rack, vertical rack, or under-counter deployment in surveillance, server, and network infrastructure environments. The unit draws 30A input (derated to 24A operating capacity) via a NEMA L5-30P twist-lock connector and distributes power across 24 NEMA 5-20R front outlets on a 10-foot power cord. Built-in digital metering displays real-time amperage consumption, letting you monitor load balance and catch power creep before circuit breakers trip.
Key Features
- 24 Front-Facing 5-20R Outlets: all outlets positioned on the front face eliminates cord management clutter behind the unit — critical when you're densely racking cameras, NVRs, and switches and need quick visual identification of which outlet powers what.
- 0U Vertical Form Factor: takes zero rack units of height, so it fits alongside standard 1U equipment without eating into your vertical real estate. Deploy horizontally in a rack or vertically wall-mounted depending on your space constraints.
- Digital Amperage Meter: real-time display of total load in amps prevents accidental oversubscription. At 24A derated capacity, you can push roughly 2,880W on a 120VAC circuit — know exactly where you stand before adding that next camera server.
- Dual 20A Overload Protection: two independent 20A circuit breakers protect connected equipment. If one branch exceeds 20A, that breaker trips in isolation, leaving the other 12 outlets live — far better than a single master breaker killing the whole PDU.
- Cord Retention Tray: spring-loaded tray grips the 10-foot power cord, preventing accidental disconnect during maintenance or equipment relocation. Standard feature, but essential in active server rooms where vibration and foot traffic are facts of life.
- Flexible Mounting Options: vertical rackmount, horizontal rackmount, wall mount, or under-counter placement give you layout flexibility. Metal housing rated for 0–10,000 ft elevation and 0–95% non-condensing humidity handles typical commercial data centers and surveillance rooms without environmental hardening.
Integration & Compatibility
The PDU30MVT24F works with any 100–125 VAC single-phase branch circuit. Use it to centralize power distribution for NVRs, IP cameras, network switches, and rack-mounted security appliances. The NEMA L5-30P input plug is a standard 30A twist-lock connector found on most commercial electrical panels; confirm with your facility electrician that your panel has a 30A breaker available before ordering. Output voltage matches input (pass-through design), so no voltage conditioning — if your building supply is clean, the PDU delivers clean power. If surge protection or conditioning is required, install a separate Uninterruptible Power Supply (UPS) upstream.
Operating Environment
Rated for 32–95°F (0–35°C) operating temperature, the PDU30MVT24F is suitable for climate-controlled server rooms and indoor surveillance installations. Do not deploy outdoors or in unheated spaces. The 1.75-inch width, 60-inch height, and 2.25-inch depth (44 × 1524 × 57 mm) fit standard equipment racks and wall-mount panels; the 11.4-pound weight is light enough for single-person installation.
Standards & Reliability
The unit meets UL62368, UL60950-1, FCC Class A, and RoHS certification, confirming electrical safety and emissions compliance for North American deployment. Carries a Limited Lifetime Warranty covering defects in materials and workmanship.
Frequently Asked Questions
Q: Can I use the PDU30MVT24F in a wall-mounted surveillance cabinet?
A: Yes. The PDU30MVT24F supports wall-mount, vertical rackmount, horizontal rackmount, and under-counter configurations. For a wall-mounted cabinet, use the wall-mount brackets and verify that your facility can supply a 30A single-phase 100–125 VAC circuit to the NEMA L5-30P input plug.
Q: What is the maximum power I can draw from the PDU30MVT24F?
A: The unit has a 30A input derated to 24A operating capacity. At 120VAC, that's approximately 2,880W maximum. Each of the two 20A circuit breakers will trip if its branch exceeds 20A, so monitor total load using the digital meter.
Q: Does the PDU30MVT24F include surge protection?
A: No. The PDU30MVT24F is a metered distribution unit only — it passes power through with digital monitoring but no conditioning or surge suppression. For surge protection or power conditioning, install a UPS or surge protector upstream.
Q: What outlets does the PDU30MVT24F use?
A: 24 NEMA 5-20R outlets on the front face. These are standard 20A receptacles compatible with most commercial equipment. The input uses a NEMA L5-30P twist-lock connector.
Q: Is the PDU30MVT24F suitable for outdoor surveillance installations?
A: No. The operating temperature range is 32–95°F (0–35°C) and humidity tolerance is 0–95% non-condensing. It is designed for climate-controlled indoor environments such as server rooms, surveillance control rooms, and equipment cabinets. For outdoor applications, use an outdoor-rated enclosure and weatherproof power distribution.
Q: What warranty does the PDU30MVT24F carry?
A: Limited Lifetime Warranty covering defects in materials and workmanship under normal use conditions.
The PDU30MVT24F solved a real problem we kept seeing in surveillance control rooms: power distribution without visibility into actual load. Most shops just plug in equipment and hope the breaker doesn't trip at 3 a.m. The digital amperage meter on the PDU30MVT24F makes load monitoring a one-glance operation, which matters when you're running 24 independent outlets and need to know whether adding an NVR will push you over the 24A derated limit.
Technical Highlights:
- Digital Amperage Meter: real-time load display prevents surprise breaker trips. At 24A derated capacity, you're looking at roughly 2,880W on a 120VAC circuit — the meter tells you exactly where you stand before you add more equipment.
- Dual 20A Overload Protection: two independent circuit breakers mean if one branch hits 20A and trips, the other 12 outlets stay live. Compare that to a single master breaker that kills everything — this design keeps you operational during troubleshooting.
- 0U Vertical Form Factor with 24 Front Outlets: all outlets face forward so you see exactly what's connected without crawling behind the rack. In a dense surveillance setup with 8–12 cameras, recorders, and switches, that front-facing layout cuts install and maintenance time significantly.
Deployment Considerations:
- The PDU30MVT24F requires a NEMA L5-30P input — verify your electrical panel has a dedicated 30A breaker before ordering. Most older facilities don't, so coordinate with your electrician early.
- This unit is pass-through power only — no surge suppression, no conditioning. If your facility has dirty power or frequent spikes, install a UPS upstream. For surveillance systems with sensitive electronics, that's often required anyway.
The PDU30MVT24F is the right choice for mid-scale surveillance control rooms and server closets where you need load visibility and reliable distribution across multiple cameras, NVRs, and network gear — particularly shops running 12+ cameras and wanting to avoid the guesswork of breaker management.
