Geovision 84-EDR4700-0010 4MP H.265 Camera Module
Overview
The Geovision 84-EDR4700-0010 is a 4MP camera module built as a sensor component for integration into Geovision's modular MPCam platform. This is not a finished camera housing—it's the engine itself. H.265 compression cuts bandwidth and storage 40–60% versus H.264, a real savings when recording dozens of cameras 24/7 across your network. WDR preserves usable detail in mixed lighting (windows next to dark corners, backlit entry doors)—important in retail and commercial spaces where you can't control the light. Deploy this module when retrofitting or expanding an existing Geovision MPCam system, or when designing a custom modular enclosure that uses the MPCam cable standard.
Compatibility
The 84-EDR4700-0010 integrates exclusively into Geovision housings and enclosures rated for MPCam cable connectivity. This cable category locks the module into the Geovision modular ecosystem. Confirm your target housing or enclosure explicitly supports MPCam before purchasing—incompatible housings will not seat the module. The module outputs ONVIF Profile S streams, so it works with Geovision VMS platforms and third-party systems that accept standard ONVIF video. If you're unsure whether your existing Geovision enclosure is MPCam-compatible, verify the housing model number against Geovision's accessory compatibility matrix or contact the integrator who specified your system.
Installation Notes
This is a component requiring proper seating inside a rated enclosure—do not deploy the bare module outdoors or in uncontrolled environments. It has no standalone environmental rating; the final IP rating depends entirely on the host housing. Ensure the MPCam cable is fully seated and strain-relieved to avoid video dropouts. H.265 encoding is hardware-accelerated on compatible Geovision NVRs and network switches. Verify your recording platform supports H.265 decode; if it doesn't, you'll incur real-time re-encoding overhead on playback.
