Altronix T1MCK1D 4-Door Mercury Access and Power Integration Kit
Overview
The Altronix T1MCK1D is a 4-door access and power integration kit engineered specifically to pair Altronix power distribution hardware with Mercury access control panels. If you're deploying a Mercury-based system and want a pre-engineered wiring and integration kit that eliminates the guesswork of matching power and control hardware across four door points, the T1MCK1D is the product built for exactly that job. The "No Power PTC" configuration means this kit ships without a power supply or PTC (Positive Temperature Coefficient) overcurrent protection device — meaning you'll source and size your own power supply to match the load requirements of your specific installation, which is common practice for integrators who already have a preferred Altronix power product in the mix.
Altronix has a long history in the access control power segment, and their Altronix integration kits are a standard fixture in Mercury panel deployments across enterprise, education, and government facilities. The T1MCK1D follows that lineage — designed for commercial-grade installations where clean wiring, reliable power distribution, and Mercury panel compatibility are non-negotiable.
Key Features
- 4-Door Mercury Compatibility: The T1MCK1D is purpose-built to integrate with Mercury access control systems across four door points — so you're not adapting a generic kit to fit a Mercury panel. The hardware and wiring architecture align directly with Mercury's reader, lock, and REX input requirements, reducing field engineering time considerably on multi-door deployments.
- No Power PTC Configuration: This variant ships without an onboard power supply or PTC overcurrent protection. That's a deliberate choice for integrators who need to size their own power supply to actual load — running door strikes, mag locks, or electric latch retraction devices at the correct amperage without being locked into a pre-packaged power tier. It also avoids the cost of paying for power capacity you won't use if you're feeding from a centralized power chassis.
- Altronix/Mercury Integration Architecture: Altronix builds these kits to handle the physical and electrical interface between their power distribution products and Mercury's hardware. This means terminal layouts, wiring runs, and connector interfaces are matched — a detail that matters when you're commissioning a system and need field technicians to wire consistently across all four doors without referencing multiple sets of documentation.
- Commercial-Grade Construction: Altronix hardware is specified for commercial and enterprise environments, not consumer or light-duty applications. The T1MCK1D is appropriate for permanent installation in IDF rooms, server closets, or dedicated access control enclosures where the kit will run continuously.
Integration & Compatibility
The T1MCK1D is explicitly designed for Mercury access control systems — this is not a universal kit. If your panel infrastructure runs a different manufacturer's hardware (HID, Lenel, Genetec-native hardware, etc.), this kit is not the right fit. Verify your Mercury panel model and door count before specifying the T1MCK1D; for installations exceeding four doors, Altronix offers additional kit variants scaled to higher door counts.
Since the T1MCK1D ships without a power supply, you'll need to pair it with an appropriate Altronix power product — sized to your lock type (mag lock vs. electric strike vs. latch retraction) and aggregate current draw across all four doors. Consult Altronix's power calculator or a access control power supply selection guide before finalizing your bill of materials. The absence of PTC protection in this kit also means your chosen power supply or distribution board should include its own overcurrent protection per door output.
For larger multi-panel or multi-site deployments, consider how this kit fits into a broader access control infrastructure — particularly if you're running Mercury EP or LP series panels in a distributed topology where power and control wiring runs need to be carefully mapped per door.
Frequently Asked Questions
Q: What does "No Power PTC" mean on the T1MCK1D?
A: The T1MCK1D ships without an integrated power supply or Positive Temperature Coefficient (PTC) overcurrent protection device. You supply your own power source sized to your lock and door hardware load. This is the correct choice when you're integrating with an existing Altronix power chassis or when you need to specify your own power capacity per the installation's current requirements.
Q: Is the T1MCK1D compatible with all Mercury access control panels?
A: The T1MCK1D is designed for Altronix/Mercury access and power integration. Confirm compatibility with your specific Mercury panel model — EP or LP series — before ordering. It is not designed for non-Mercury panel hardware.
Q: How many doors does the T1MCK1D support?
A: The T1MCK1D supports four doors. For installations with more than four door points, you will need additional kits or a higher-capacity variant from the Altronix integration kit line.
Q: Do I need to purchase a power supply separately with the T1MCK1D?
A: Yes. The "No Power PTC" designation means no power supply is included. You will need to pair the T1MCK1D with an Altronix power supply or power distribution product sized to your specific lock hardware and door count load requirements.
Q: Can the T1MCK1D be used in a rack-mount or enclosure installation?
A: Altronix integration kits are designed for commercial installation environments including dedicated access control enclosures and IDF rooms. Verify mounting dimensions and enclosure compatibility with your specific installation hardware before finalizing your design.
The T1MCK1D is a straightforward but important piece of a Mercury-based access control build — it handles the Altronix-to-Mercury interface across four doors without bundling in power capacity you may not need. The No Power PTC configuration is the detail that matters most here: it means this kit is for integrators who already have a power strategy and don't want to pay for or work around a built-in supply that doesn't fit their load profile.
Technical Highlights:
- 4-Door Scope: Covers exactly four door points in a single kit — right-sized for a single Mercury panel deployment covering a small floor or building wing without over-engineering the power distribution side.
- Mercury-Specific Integration: The terminal and wiring architecture is matched to Mercury panel input/output requirements, which means field techs wire to a known standard rather than adapting a generic distribution board to a Mercury panel's pinout.
- No Power PTC: Decouples power supply selection from the kit — appropriate when you're feeding from a centralized Altronix power chassis or when door hardware current draw requires a non-standard supply size that a bundled PTC tier would constrain.
Deployment Considerations:
- Since no power supply ships with the T1MCK1D, calculate aggregate lock current draw across all four doors before selecting your Altronix power product — mag locks typically draw 500mA each at 12VDC, putting a four-door mag lock deployment at 2A minimum before adding reader and REX device loads.
- The absence of PTC protection means your power source or distribution board must provide per-output overcurrent protection — do not leave door outputs unprotected, particularly on mag lock circuits where a short can damage both the lock and the panel input.
The T1MCK1D is the right spec for a Mercury EP/LP panel deployment in a commercial office, educational facility, or government building where the integrator is running a centralized Altronix power chassis and needs a clean, Mercury-matched four-door wiring kit without redundant built-in power components.
