Middle Atlantic AVIP-FK2 2RU Fixed Rack Panel for the AVIP Modular System

Overview

The Middle Atlantic AVIP-FK2 is a 2-rack-unit fixed filler panel designed for the AVIP rackmount panel system. At exactly 19 inches wide and 3.5 inches tall — the standard 2RU footprint — it slots cleanly into any EIA-standard 19-inch rack to close open bays, maintain airflow discipline, and keep cable runs tidy in AV, security, and IT infrastructure deployments. If you're building out a rack that combines active AVIP connector modules with unused bays, the AVIP-FK2 (often searched as AVIP FK2) is the purpose-built blank to complete the assembly without improvising with generic fillers that don't match the panel face.

Key Features

• 2RU Fixed Face (3.5 in tall × 19 in wide): Occupies exactly two rack units with no adjustable or removable sections — fixed geometry means no risk of a filler panel shifting or partially ejecting under vibration in transport racks or equipment rooms with heavy foot traffic. You're filling a 2RU gap with something that stays put.
• 19-Inch Standard Width: The 19-inch (48.3 cm) width is the EIA/IEC 60297 rack standard, so this panel is compatible with any compliant 19-inch rack enclosure — Middle Atlantic, Chatsworth, Rittal, or third-party. No adapters, no modification.
• Shallow 2.92-Inch Depth: At 2.92 inches (7.4 cm) deep, the AVIP-FK2 fits in shallow-depth wall-mount enclosures and standard 4-post racks alike. Shallow-depth AV racks in conference rooms and control rooms often run 12–16 inches of usable depth — this panel won't conflict.
• 2 Mounting Points: Ships with two mounting points, consistent with a direct front-rail mount. This means installation is a straightforward two-screw drop-in — no cage nuts required beyond what your rack already accommodates for standard EIA-hole-pattern rails.
• Lightweight at 2 lbs Shipping Weight: The low shipping weight (0.9 kg) indicates a sheet-metal or formed-panel construction typical of Middle Atlantic blanks — light enough that it won't affect rack weight budgets in mobile or flypack configurations.
• AVIP System Integration: Designed as a native component of Middle Atlantic's AVIP rackmount panel system, so the panel face, finish, and bezel alignment match adjacent AVIP connector modules. This matters in client-facing installations where a mismatched filler panel stands out visually against a row of branded AVIP inserts.

Integration and Compatibility

The AVIP-FK2 is a purpose-built component of the Middle Atlantic Middle Atlantic rack and AV infrastructure line. It is designed to occupy open 2RU bays within a rack accessory build that uses active AVIP connector inserts — HDMI, USB, XLR, RJ-45, or other signal-type blanks from the AVIP family. Because it conforms to the EIA 19-inch standard, it is mechanically compatible with any standard rack enclosure regardless of brand.

For integrators building structured AV or security infrastructure racks, pairing filler panels with a rack enclosure ensures unused bays don't disrupt front-to-back airflow — a real factor in enclosed racks with active thermal management. When planning a full rack build, review your rack layout and cable management planning to assign AVIP modules and filler positions before installation, since repositioning panels after cable dressing is time-consuming.

Frequently Asked Questions

Q: What rack unit size is the AVIP-FK2?

A: The AVIP-FK2 occupies 2 rack units (2RU), measuring 3.5 inches tall and 19 inches wide — standard EIA dimensions.

Q: Is the AVIP-FK2 compatible with non-Middle Atlantic racks?

A: Yes. The 19-inch width conforms to the EIA/IEC 60297 standard, so it installs in any compliant 19-inch rack enclosure regardless of manufacturer.

Q: How deep is the AVIP-FK2?

A: It is 2.92 inches (7.4 cm) deep — shallow enough for wall-mount enclosures and compact AV racks with limited usable depth.

Q: How many screws or mounting points does the AVIP-FK2 use?

A: The panel uses 2 mounting points for front-rail attachment, making installation a simple two-screw process on standard EIA-pattern rack rails.

Q: Can the AVIP-FK2 be used alongside active AVIP connector modules?

A: Yes — it is a native component of the Middle Atlantic AVIP rackmount panel system, designed to fill unused bays while maintaining a consistent panel face alignment with adjacent active AVIP inserts.

Q: What does the AVIP-FK2 weigh?

A: The shipping weight is 2 lbs (0.9 kg), making it suitable for mobile racks and flypack builds where total weight is a constraint.

Ted Perry

The AVIP-FK2 is one of those parts you order once and wish you'd ordered more of — a 2RU fixed blank that locks the AVIP panel system's appearance together when you have more bay space than active modules. At 2.92 inches deep and 2 lbs shipping weight, it drops into shallow AV racks and full-depth IT enclosures equally without drama.

Technical Highlights:

• Fixed Face Construction: No moving parts, no adjustable sections — the fixed geometry means zero risk of panel shift under vibration, which matters in mobile production racks or security control rooms where doors get slammed.
• 2.92-Inch Depth: Shallow enough to install in wall-mount boxes with 12–16 inches of usable depth — often a constraint in conference room AV builds where you can't use a 4-inch-deep filler without hitting the back panel.
• 2-Point Front-Rail Mount: Two mounting points means this goes in with two screws on standard EIA-pattern rails — no cage nut gymnastics, no rear support bracket needed. Fast to install, easy to reposition during rack dress.

Deployment Considerations:

• When building an AVIP modular panel rack, plan your module positions before installing filler panels — the AVIP-FK2's fixed face is designed to align flush with active AVIP inserts, and repositioning after cable dressing costs time.
• The 2RU height is non-configurable: if you need to fill a 1RU gap, this is not the right panel — verify your open bay count before ordering.

The AVIP-FK2 is the right call for any AV integration or security rack build using Middle Atlantic's AVIP connector panel system where unused 2RU bays need a flush, matched filler — particularly in client-visible control rooms and boardroom AV racks where panel-face consistency is part of the finished installation standard.