Middle Atlantic Rackmount 19IN Black W/3 - J60B0B20X

Middle Atlantic J60B0B20X 19-Inch Rackmount Power Strip

The Middle Atlantic J60B0B20X is a 19-inch rackmount power strip rated at 120V/20A — a straightforward, reliable power distribution choice for AV racks, security equipment enclosures, and IT infrastructure builds where clean circuit management and TAA compliance matter. The 6-foot (1.8m) power cord gives you the slack to reach a dedicated 20A circuit without adapters or extension risks, and the all-black finish integrates cleanly into standard 19-inch rack environments. For a broader look at the Middle Atlantic rack power and enclosure line, this unit sits in the core J60B series designed for commercial and government rack deployments.

Key Features

• 120V / 20A Rating: Designed for a dedicated 20A branch circuit — the right spec when you're running PoE switches, NVRs, and other security devices that collectively draw more than a standard 15A outlet can reliably support without nuisance tripping. Pair this with a 20A NEMA L5-20 or 5-20 circuit at the rack for proper load management.
• 19-Inch Rackmount Form Factor: Mounts directly in any standard 19-inch EIA rack without adapters — consistent with rack power distribution best practices for AV and security infrastructure. Black finish matches standard rack hardware and keeps the build looking professional in an IT closet or data room.
• 6-Foot (1.8m) Power Cord: The 6-foot cord length provides practical reach from the rack to a wall outlet or floor PDU without needing a cord extension — a detail that matters in tight IDF closets where outlet placement is rarely ideal. Shorter cords force compromises; longer cords create cable management headaches. Six feet is the working standard for most rack deployments.
• TAA Compliant: The J60B0B20X meets Trade Agreements Act requirements, which is a hard procurement gate for federal, state, and municipal government projects. If your bid requires TAA-compliant rack infrastructure, this unit qualifies — no need to track down a separate government-spec power strip or substitute a non-compliant unit after the fact. Verify TAA requirements with your procurement office for specific contract vehicles.

Integration and Compatibility

The J60B0B20X is designed for standard 19-inch equipment racks and is compatible with Middle Atlantic rack enclosures as well as third-party 19-inch racks following EIA-310 standards. It draws from a 20A branch circuit, so confirm your electrical panel and breaker are sized accordingly before installation — a 20A strip on a 15A circuit is a code violation and a fire risk. For deployments integrating PoE network switches or network video recorders, budget your actual load against the 20A rating with at least 20% headroom per NEC 210.19 continuous-load rules. The black finish and standard 1U or strip profile integrates cleanly alongside Middle Atlantic rack shelving, blanks, and cable management accessories.

Frequently Asked Questions

Q: Is the Middle Atlantic J60B0B20X TAA compliant?

A: Yes, the J60B0B20X is TAA (Trade Agreements Act) compliant, making it eligible for federal, state, and municipal government procurement contracts that require TAA-compliant products.

Q: What circuit does the J60B0B20X require?

A: The J60B0B20X is rated for 120V/20A and should be connected to a dedicated 20A branch circuit. Using it on a 15A circuit is a code violation. Verify your panel and breaker capacity before installation.

Q: How long is the power cord on the J60B0B20X?

A: The power cord is 6 feet (1.8 meters), providing practical reach in most rack closet and data room environments without requiring a cord extension.

Q: What rack size does the J60B0B20X fit?

A: The J60B0B20X is designed for standard 19-inch EIA racks, consistent with the vast majority of AV, security, and IT rack infrastructure.

Q: Can I use the J60B0B20X in a government or federal deployment?

A: Yes. TAA compliance is confirmed for the J60B0B20X, which satisfies the Trade Agreements Act requirement common to GSA schedules and other government contract vehicles. Confirm specific contract requirements with your procurement officer.

Jerry Tildsen

The Middle Atlantic J60B0B20X comes up regularly in government-adjacent security builds where TAA compliance is a hard stop on the procurement checklist — and the 120V/20A rating with a 6-foot cord covers the practical requirements for most single-rack security equipment loads without overengineering the power layer.

Technical Highlights:

• 20A Circuit Rating: Running NVRs, PoE switches, and access control hardware on a shared 15A circuit is one of the most common causes of nuisance tripping in security rack builds. The 20A rating on this unit — paired with a proper 20A branch circuit — removes that failure mode entirely.
• 6-Foot Cord: In practice, rack closets rarely have outlets positioned ideally. The 1.8m cord hits the sweet spot — enough reach for most IDF/MDF layouts without creating the excess cable management burden that a 10-foot cord introduces.
• TAA Compliance: For integrators bidding on state, local, or federal contracts, TAA compliance on every rack component — including power strips — is a real checklist item. The J60B0B20X satisfies that requirement, which eliminates a substitution scramble mid-bid.

Deployment Considerations:

• Confirm your branch circuit is rated 20A before install — the strip's rating is only as good as the circuit feeding it, and a 20A strip on a 15A breaker is both a code violation and a thermal risk under sustained load.
• Evidence confirms TAA compliance but does not specify outlet count or surge/filter protection — if your deployment requires MOV-based surge suppression or EMI filtering, verify those specs before specifying this unit over a filtered PDU variant.

Best fit for TAA-required government security rack builds — federal access control closets, municipal surveillance equipment rooms, and state agency IT infrastructure where the procurement gate is compliance first and the load profile is standard 120V security hardware.