Middle Atlantic 2PK Tlscp F-R(20-36)LCBAR - LBFR-2036-T

Middle Atlantic LBFR-2036-T Telescoping Front-to-Rear Lacer Bar 2-Pack

Overview

The Middle Atlantic LBFR-2036-T is a pair of horizontal, front-to-rear telescoping lacer bars engineered for structured cable management inside open-frame and enclosed equipment racks. Each bar adjusts continuously from 20 inches to 36 inches of mounting depth, covering the full range of standard and deep rack configurations without requiring model swaps or custom hardware. If you're routing power, data, or signal cables through a rack and need a clean, serviceable path — rather than a zip-tied tangle — this is the component that gives you that structure.

Sold as a 2-pack, the LBFR-2036-T is intended for deployments where symmetrical front-to-rear cable lanes are the goal: one bar near the front of the rack, one toward the rear, bracketing a clean horizontal run that keeps cables off active equipment and accessible for moves, adds, and changes.

Key Features

• 20–36 in Telescoping Adjustment: The bar extends continuously between 20 and 36 inches of mounting depth — that 16-inch range means a single SKU covers shallow two-post racks and deep four-post enclosures alike. You won't need to stock multiple fixed-depth variants for mixed rack environments.
• Horizontal Component Type: Oriented horizontally across the rack width, the LBFR-2036-T creates a dedicated lateral cable lane. Horizontal lacer bars keep bundle routing predictable and prevent cables from sagging onto switch ports or patch panels below.
• 0.5 in Width Profile: At only half an inch wide, the bar itself consumes minimal lateral clearance inside the rack. Cable bundles lace over the bar without crowding adjacent 1U equipment on either side — relevant in tightly packed security or AV head-end racks where every fraction of an inch matters.
• 3.47 in Height Form Factor: The 3.47-inch height keeps the bar's footprint contained to roughly 2U of visual space while still providing a solid lacing surface. In racks where vertical real estate is already committed to switches, NVRs, and patch panels, that low profile means you're not sacrificing usable rack units for cable management.
• 2-Pack Included: Both bars ship together in one order. For a standard four-post rack, one pair handles a single horizontal cable management zone. Larger installations or multi-zone runs require additional pairs — plan accordingly.
• 20 in Minimum Depth Compatibility: The 20-inch minimum means the LBFR-2036-T installs in compact racks that many fixed-depth alternatives cannot reach. Shallow wall-mount enclosures and two-post open frames in wiring closets and security head-end rooms are all viable installations.
• Shipping Weight 2.8 lbs for the Pair: At 1.4 lbs per bar, these are light enough to handle single-handed during installation, which matters when you're working overhead in a rack or reaching into a populated enclosure. No tool staging required for the bars themselves.

Integration and Compatibility

The LBFR-2036-T is designed for Middle Atlantic rack systems and is compatible with any standard EIA-310 open-frame or enclosed rack that supports front-to-rear horizontal cable management bars. The telescoping mechanism accommodates rack depths from 20 to 36 inches — verify your rack's internal usable depth (not just the nominal rack depth) before ordering, as actual usable depth can run 1–3 inches shorter than the rack's external dimension.

These lacer bars pair naturally with horizontal cable management panels, vertical cable raceways, and brush-entry grommets. In security integrator rack builds — where a single enclosure might carry an NVR, a PoE network switch, a UPS, and a patch panel — lacer bars like the LBFR-2036-T are what separate a serviceable installation from one that requires complete re-cabling on the next truck roll. Pair with Middle Atlantic rack enclosures and accessories for a coordinated cable management system from the same product family.

For security and AV integrators specifying full rack builds, review the rack systems category for compatible enclosures, and consult the cable management guide for lane-planning best practices across mixed-equipment racks.

What's in the Box

• 2x Middle Atlantic LBFR-2036-T telescoping front-to-rear lacer bars

Frequently Asked Questions

Q: What rack depth range does the LBFR-2036-T cover?

A: Each bar adjusts from 20 inches (minimum) to 36 inches (maximum) of mounting depth. This covers most standard and deep four-post rack configurations. Verify your rack's actual internal usable depth before ordering.

Q: How many lacer bars come in a package?

A: The LBFR-2036-T ships as a 2-pack. Each package contains two telescoping lacer bars.

Q: Is the LBFR-2036-T compatible with non-Middle Atlantic racks?

A: The bars are designed for standard EIA-310 rack mounting and are compatible with any open-frame or enclosed rack that supports front-to-rear horizontal lacer bar installation within the 20–36 inch depth range.

Q: What orientation does the LBFR-2036-T install in?

A: These are horizontal lacer bars, meaning they run front-to-rear across the rack interior to create a lateral cable management lane. They are not designed for vertical cable routing applications.

Q: What is the physical size of each bar?

A: Each bar is 20 inches deep (at minimum extension), 3.47 inches tall, and 0.5 inches wide. The pair ships at a combined weight of 2.8 lbs.

Karl Wilson

The detail I keep coming back to on the LBFR-2036-T is that 16-inch adjustment range — 20 to 36 inches of mounting depth in a single telescoping bar. In practice, that means one SKU handles the shallow two-post open frames in a wiring closet and the 36-inch deep four-post enclosures in a head-end equipment room. For integrators managing mixed rack environments across a multi-site deployment, that range eliminates the part-number proliferation that otherwise shows up in procurement.

Technical Highlights:

• 20–36 in Telescoping Range: 16 inches of continuous adjustment means no fixed-depth SKU swaps. Install in compact 20-inch racks or full-depth 36-inch enclosures with the same hardware.
• 0.5 in Width Profile: The narrow bar cross-section keeps lateral clearance losses negligible — cable bundles route over the bar without encroaching on adjacent 1U equipment panels or patch bay ports.
• 2-Pack Configuration: Both bars ship together at a combined 2.8 lbs, so a single order covers one complete front-to-rear cable management zone in a standard four-post rack.

Deployment Considerations:

• Measure your rack's internal usable depth, not the nominal external rack depth — usable depth runs 1–3 inches shorter on most enclosed cabinets, and installing at the wrong dimension will leave the bar either loose or unable to extend fully.
• One 2-pack covers a single horizontal cable zone. Multi-zone rack builds (e.g., separate power and data lanes) require additional pairs; order multiples at the same time to avoid a second freight charge on a small accessory order.

The LBFR-2036-T (often searched as LBFR 2036 T) is the right call for security integrators building out NVR and networking head-end racks where cable serviceability on the next truck roll is as important as the initial install quality — particularly in multi-camera IP deployments where adds and changes to switch ports and patch panels are routine.