Geovision 84-ABL270W-G010 2MP Low Lux IR Bullet Camera
Overview
The Geovision 84-ABL270W-G010 is a 2MP bullet-form fixed camera designed for continuous monitoring in low-light and complete-darkness environments. The integrated infrared illuminators enable usable imagery without auxiliary lighting—critical for unattended perimeters, parking areas, loading docks, and facility entries where ambient light drops to near zero. Built-in WDR balances mixed-light scenes (sunlit entrance + shadowed hallway) without halo artifacts that confuse motion analytics or forensic review. H.265 compression cuts storage and bandwidth load roughly in half versus H.264, a real savings on 24/7 single-camera or small multi-site deployments. The compact bullet housing mounts discreetly on walls, eaves, or poles, minimizing visual footprint while maintaining crisp sight lines to critical zones.
Compatibility
The 84-ABL270W-G010 integrates into any ONVIF-compliant network video recorder (NVR) or video management software (VMS) that accepts standard IP-based H.265 and H.264 streams. It operates via standard Ethernet cabling with PoE power delivery—no separate DC power run required. Fits environments using centralized network infrastructure: corporate security systems, small-to-medium warehouse deployments, multi-site retail chains with local or cloud-based recording, and facility management platforms that pull streams from distributed IP cameras across properties.
Installation Notes
Connects via standard RJ-45 Ethernet and PoE injector or PoE-enabled network switch (802.3af or higher). Verify your PoE budget if deploying multiple cameras on a single switch port group. The bullet form factor requires a clear line of sight to the monitored area—obstructions or excessive glare degrade IR effectiveness. Mount securely to prevent wind-induced drift or vibration that softens focus on distant subjects. Allow adequate ventilation around the housing to prevent condensation buildup in humid climates.
What's in the Box
- 1x Geovision 84-ABL270W-G010 bullet camera
- Mounting hardware (specific fasteners per installation surface)
- RJ-45 weatherproof connector
