2N 01284-001 Flush Wall Installation Box
The 2N 01284-001 is a purpose-built flush wall-mounted enclosure designed to integrate 2N IP intercom and access control modules into modern security deployments. Unlike surface-mounted boxes that protrude visibly, this recessed installation solution keeps wiring and equipment hidden behind finished wall surfaces — a practical advantage when aesthetics matter alongside security function in corporate offices, multi-tenant buildings, and institutional facilities.
Overview
This single-module box is part of the broader 2N IP intercom and access control ecosystem. The 01284-001 accepts one 2N IP module — whether a video intercom station, audio module, or access control reader — and mounts flush into standard wall cavities. Because the enclosure recesses into the wall itself, the installed module sits nearly flush with the finished surface, eliminating the visual clutter of protruding hardware. This matters in environments where security infrastructure should blend into the space rather than announce itself.
Recessed mounting also simplifies surface wiring paths. All cable entry points route through the wall cavity, which is both cleaner and reduces the risk of exposed RJ-45 or power connections being damaged or disconnected by foot traffic or cleaning crews — a real problem in high-traffic entry points.
Key Features
- Single Module Capacity: Accommodates exactly one 2N IP intercom or access control module. This constraint forces deliberate placement decisions — no over-engineering a single entry point with redundant stations, but also no temptation to cram multiple units where one suffices. Right-sizing from the start reduces installation complexity and keeps costs predictable.
- Flush Wall Mounting: Engineered for recessed installation into standard wall cavities. The enclosure body sits inside the wall, with the front face mounted flush to drywall. This approach eliminates the profile of surface-mounted boxes and keeps cable runs concealed — important when the installation must respect architectural aesthetics or comply with facility design standards.
- Durable Construction: Built to withstand repeated daily use and environmental stress from temperature swings, humidity, and contact. The material and internal bracing protect the mounted module from physical shock and accidental impacts that can occur in busy entryways.
- 2N IP Verso Ecosystem Integration: Compatible exclusively with 2N IP Verso modules — verified interoperability without trial-and-error. This vendor-specific compatibility ensures reliable power delivery, control signaling, and video/audio streaming without cross-compatibility headaches that plague mixed-vendor setups.
- Professional Appearance: Recessed design delivers a finished, integrated look that blends into modern office and institutional architecture. Security infrastructure stays functional while remaining visually subordinate to the space itself.
- Flexible Module Selection: The box itself is transport and housing; your choice of module determines function. Deploy an audio intercom in one location, a video door station in another, and a card reader in a third — using the same 01284-001 enclosure across multiple deployment scenarios.
Integration and Deployment
The 01284-001 requires planning around wall construction. Before installation, verify that your wall cavity is deep enough to accommodate the enclosure body plus the module depth — typically 2 to 3 inches depending on the chosen 2N module. This is not a surface-mount retrofit; it requires access to the wall cavity during construction or renovation. If you're upgrading an existing facility with finished walls, surface-mounted 2N intercom solutions or external enclosures may be faster alternatives.
Power and control connections (typically PoE, audio, door strike, and relay outputs) wire through the wall to your main control system or PoE switch. Ensure your PoE infrastructure supports the power budget of your chosen module — most 2N IP modules draw under 20W, so standard 802.3at (PoE+) is usually sufficient.
Compatible with the full range of 2N IP Verso modules. Verify your specific module is listed as compatible in the 2N IP Verso product documentation before ordering.
When to Choose a Different Model
If your deployment requires surface-mounted convenience (no wall cavity available, renovation costs unacceptable), consider 2N's surface-mounted intercom boxes or outdoor-rated stainless steel enclosures. If you need to mount multiple modules in a single location — say, both video and audio stations at a main entrance — you'll require a multi-module box variant, not the single-module 01284-001.
Frequently Asked Questions
Q: Can I use the 2N 01284-001 in outdoor installations?
A: This enclosure is designed for indoor wall mounting. For outdoor intercom installations, verify IP/IK ratings of the specific module you plan to install — the box itself is not rated for direct weather exposure.
Q: Does the 01284-001 support all 2N IP Verso modules?
A: The box is designed for single 2N IP Verso-series modules. Verify the depth and physical compatibility of your chosen module against the enclosure dimensions before purchase.
Q: What happens if my wall cavity is too shallow?
A: A shallow cavity will prevent proper seating of the enclosure body. Measure your wall cavity depth before ordering. If you cannot accommodate the required depth, consider a surface-mounted alternative or install during renovation when wall framing is accessible.
Q: Is the 01284-001 supplied with mounting hardware?
A: Mounting hardware and installation instructions are included. Exact contents depend on your supplier's packaging; verify the box contents upon delivery.
Q: Can I install this in drywall, plaster, or masonry walls?
A: The enclosure is designed for standard framed wall cavities (stud-and-drywall construction). Installation in solid masonry or plaster requires additional planning and potentially different mounting strategies; consult 2N installation guidance or a qualified integrator for non-standard wall types.
Q: What is the warranty period for the 01284-001?
A: Warranty terms are set by 2N and your supplier. Consult the product documentation or your distributor for specific warranty coverage.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 2N 01284-001 solves a real problem: how to deploy a professional-grade intercom or access control station without turning your entryway into an obvious security installation. Flush-mount design means the equipment disappears into the wall, which matters when your facility manager insists on aesthetics alongside access control. The single-module capacity (often searched as 01284 001) forces discipline — you commit to one function per box, which eliminates confusion about which module controls what and simplifies troubleshooting if something fails.
Technical Highlights:
- Flush Wall Mounting Design: Recessed installation into standard wall cavities keeps the module face nearly flush with finished surfaces. This eliminates the 2–3 inch profile of surface-mounted boxes and routes all wiring through the wall cavity — cleaner aesthetics, reduced risk of cable damage from foot traffic or accidental disconnection.
- Single Module Slot: Accepts one 2N IP Verso module (video intercom, audio station, or access control reader). This constraint prevents over-engineering and keeps installation straightforward — no multi-unit complexity where one module suffices.
- H.264 Video Compression Support: The compatible 2N IP Verso modules support H.264 video encoding, which balances file size and quality on network storage. For single-station deployments, H.264 is adequate; if you're running dozens of stations, the compression efficiency directly impacts your storage and bandwidth budget.
Deployment Considerations:
- Wall Cavity Requirement: This is a recessed-mount solution, not a surface retrofit. You need access to a standard wall cavity (stud-and-drywall construction) and sufficient depth to accommodate the enclosure body plus your chosen module. Shallow cavities, solid masonry, or finished walls without access make this solution impractical — in those cases, surface-mounted alternatives are faster and cheaper.
- Module Compatibility Verification: The 01284-001 is exclusive to 2N IP Verso modules. Before ordering, confirm your intended module (video station, audio reader, etc.) is listed as compatible in the 2N product documentation. Cross-vendor modules will not fit or integrate reliably.
- Installation Timing: Best installed during new construction or renovation when walls are open. Retrofitting into occupied facilities with finished walls requires either selective demolition or creative rerouting of cable runs — both add cost and disruption.
The 01284-001 is the right choice for new office builds, multi-tenant facilities under renovation, or institutional upgrades where you control the construction timeline and can plan wall cavities accordingly. If your deployment is retrofit-only (no wall cavity access) or requires multiple intercom stations at a single entry point, look to surface-mounted or multi-module enclosure alternatives instead.
