Middle Atlantic 25PC. EB2 Master Pack - EB2MP

Middle Atlantic EB2MP 2U Blank Rack Panel — 25-Pack

Overview

The Middle Atlantic EB2MP is a 2U flanged blank rack panel sold in a 25-piece master pack — the practical buy for integrators stocking out multi-rack deployments or building a clean finished look across a head-end room. At 19 inches wide and just 0.52 inches deep, it fills unused rack space without eating into usable depth, keeping your equipment paths clear and your documentation photos presentable. If you're regularly closing out security or AV racks, having a case of EB2MP panels on the shelf beats ordering one-offs every time a project lands.

Explore the full Middle Atlantic rack and enclosure line for compatible cabinets, cable managers, and power distribution.

Key Features

• 2 Rack Units (3.5 in / 8.9 cm tall): fills two open rack units cleanly — useful for covering large gaps left by equipment swaps or future-provisioned slots, without the waste of stacking two 1U panels and doubling your hardware count.
• Flanged steel construction: the flanged style means the panel sits flush and stays put without flex. Steel at this gauge handles incidental contact in working racks without denting or warping over time.
• Flat black powder coat finish: matches standard rack aesthetics — no paint mismatches against other rack panel accessories in the same enclosure. Powder coat is more durable than spray paint and won't chip from normal tool contact.
• 19-inch standard panel width: fits any EIA-standard 19-inch rack rail — enterprise server racks, security head-end cabinets, telecom enclosures. No adapter required.
• 0.52-inch depth: adds virtually nothing to the rack's internal depth footprint, leaving full clearance for cable runs and equipment behind the panel.
• 2 mounting points: two-screw mount provides enough retention to hold the panel secure under vibration or frequent rack-door contact without over-constraining anything.
• 25-piece master pack: a full case covers 50 rack units of blank space — enough for a 42U rack with room left over, or spread across multiple smaller enclosures on a single project. Reduces per-unit cost compared to buying individually and keeps your van stocked for the next job.

Integration & Compatibility

The EB2MP installs into any EIA/ECA-310 compliant 19-inch rack using standard 10-32 or 12-24 rack screws (not included). It works alongside rack-mounted network and security equipment from any manufacturer — there are no vendor-specific fitment requirements. The flanged style is compatible with both threaded and square-hole rail systems when used with the appropriate cage nut or screw hardware. For integrators building out structured cabling closets or security head-ends, pair with a cable management panel to maintain a clean, serviceable installation.

What's in the Box

• 25x Middle Atlantic EB2MP 2U Flanged Blank Rack Panels

Frequently Asked Questions

Q: What rack unit size is the EB2MP?

A: The EB2MP is a 2U panel, measuring 3.5 inches (8.9 cm) tall — it fills two standard rack units.

Q: How wide is the EB2MP and will it fit my rack?

A: The EB2MP is 19 inches wide, which fits any EIA/ECA-310 standard 19-inch rack rail — the universal standard for server, AV, and security enclosures.

Q: How many panels come in the EB2MP master pack?

A: The EB2MP master pack contains 25 panels, covering a total of 50 rack units of open space.

Q: What material and finish are the EB2MP panels?

A: Steel construction with a flat black powder coat finish — durable and consistent with standard rack aesthetics.

Q: How deep is the EB2MP panel?

A: Only 0.52 inches (1.3 cm) deep, so it adds negligible depth inside the rack and won't obstruct cabling or equipment behind it.

Q: What mounting hardware is used with the EB2MP?

A: The EB2MP has 2 mounting points and installs with standard 10-32 or 12-24 rack screws or cage nuts depending on your rail type. Mounting hardware is not included in the pack.

James Everett

The EB2MP is the panel I spec on every multi-rack security head-end project where the integrator is closing out the job properly. The 25-pack format means one line item covers 50U of blank space — enough for a full 42U cabinet plus spares for the next job, all with a consistent flat black powder coat that won't look out of place next to properly finished rack gear.

Technical Highlights:

• 2U flanged steel: at 0.52 inches deep, you're not sacrificing any usable rack depth, and the flanged edge keeps the panel rigid — no bowing or rattle on door-mounted or portable racks.
• 19-inch EIA standard width: zero fitment risk across any compliant 19-inch enclosure, from a wall-mount security cabinet to a 45U data center rack. Two mounting points is the right balance — secure without making the panel a hassle to swap when equipment gets added later.
• 25-piece case quantity: the shipping weight on this case is 34 lbs for 25 panels, which is a reasonable van load. Order one case per project with mixed rack densities and you'll rarely run short.

Deployment Considerations:

• Mounting hardware (10-32 or 12-24 screws, cage nuts) is not included — confirm your rail type before the job so you're not sourcing fasteners on-site.
• The 2U format is efficient for large gaps, but if you have a mix of 1U and 2U open slots in the same rack, you'll want EB1 panels alongside — a case of EB2MP won't cover single-unit gaps.

The EB2MP master pack is the right buy for commercial integrators closing out security head-ends, structured cabling closets, or multi-rack AV installs where finished appearance and long-term serviceability both matter.