i-PRO EY9210B 24V Ni-MH 3.0Ah Replacement Battery Pack
Overview
The i-PRO EY9210B is a 24V Nickel-Metal Hydride (Ni-MH) battery pack rated at 3.0 Ah, designed as a genuine replacement or spare power source for compatible i-PRO equipment. If your deployment depends on uninterrupted operation — whether for body-worn cameras, portable recorders, or other i-PRO battery-dependent devices — having a verified OEM-spec battery on hand is the difference between a functional unit and one sitting on a charging dock when you need it most. For a broader look at the i-PRO product lineup, the full catalog covers everything from edge cameras to recording infrastructure.
Key Features
- 24V Nominal Voltage: Matched to the voltage requirements of compatible i-PRO hardware — using an incorrect voltage battery risks device damage or outright non-function. The EY9210B eliminates that guesswork.
- 3.0 Ah Capacity: At 3.0 amp-hours, this pack delivers meaningful runtime for field or portable use. Higher capacity than a 1.5 Ah or 2.0 Ah pack translates directly to longer shift coverage before a swap or recharge is needed.
- Ni-MH Chemistry: Nickel-Metal Hydride cells don't suffer from the memory effect that plagued older Ni-Cd packs, meaning partial charges won't degrade rated capacity over time. This matters in environments where batteries are topped off opportunistically rather than fully discharged.
- Genuine i-PRO Part: Sourced as a factory-new, genuine i-PRO component — not a third-party compatible. OEM-spec cells maintain the electrical tolerances the host device was designed around, which matters for both runtime predictability and long-term device health.
- Designed for Field Replacement: Packaged as a discrete battery unit, the EY9210B supports hot-swap or rapid field replacement workflows where downtime between shifts needs to be minimized.
Integration and Compatibility
The EY9210B is intended for use with i-PRO cameras and portable devices that specify a 24V Ni-MH battery pack. Always confirm the target device's battery specification before ordering — i-PRO publishes compatibility data per device model. If you are deploying body-worn cameras or portable video units in a fleet environment, stocking two or more EY9210B packs per device is standard practice to support continuous operation across multi-shift deployments. Pair with appropriate battery charging equipment to maintain pack health over the product's service life.
Frequently Asked Questions
Q: What devices is the EY9210B compatible with?
A: The EY9210B is a 24V 3.0Ah Ni-MH battery pack designed for compatible i-PRO equipment. Confirm your specific device model's battery requirement against i-PRO's published specifications before ordering.
Q: Does Ni-MH chemistry suffer from memory effect?
A: No. Ni-MH cells are not significantly affected by memory effect, unlike older Ni-Cd chemistries. You can top off the pack without meaningfully degrading its rated 3.0Ah capacity over time.
Q: Is the EY9210B a genuine i-PRO part or a third-party compatible?
A: The EY9210B is a genuine i-PRO part, factory-new and sourced to OEM specification — not a third-party or aftermarket compatible.
Q: How many packs should I stock per device for a multi-shift deployment?
A: For continuous multi-shift operation, stocking a minimum of two EY9210B packs per device allows one to be in use while the other charges, eliminating downtime between shifts.
The EY9210B's 3.0Ah capacity at 24V is the specification that matters most when planning shift coverage for portable i-PRO deployments. A higher-capacity pack directly extends the window between swaps — and in body-worn or portable camera environments, that gap is the difference between an officer or technician staying operational or returning to base mid-shift to recharge.
Technical Highlights:
- 24V / 3.0Ah Rating: Delivers the voltage and capacity the host device was engineered around — no derating, no compatibility uncertainty when using a genuine i-PRO part.
- Ni-MH Chemistry: Tolerates opportunistic partial charging without capacity loss, which is the realistic charging pattern in most field deployments — not textbook full-discharge cycles.
- Genuine OEM Spec: Third-party battery compatibles frequently underdeliver on rated capacity and can introduce voltage irregularities. The EY9210B is factory-spec, which matters for both runtime predictability and device longevity.
Deployment Considerations:
- Plan on a minimum 2:1 battery-to-device ratio for any multi-shift operation — one pack active, one on the charger. Three packs per device is worth considering for 24/7 deployments with limited charging windows.
- Confirm the target device explicitly calls out a 24V Ni-MH pack before ordering — i-PRO makes multiple battery form factors across its product line, and voltage mismatches are a real field mistake.
The EY9210B is the right call for fleet managers running i-PRO portable or body-worn equipment across extended shifts where battery swap logistics need to be predictable and runtime needs to be consistent.
