Panduit CUWBPS24ST02B1 2400mm Black Wall Beam Pair
The Panduit CUWBPS24ST02B1 is a 2400mm (approximately 94.5-inch) black wall beam pair designed for structured cabling and rack infrastructure deployments. At nearly 2.4 meters in span, this beam pair suits wide-bay installations — server rooms, data centers, and security head-end rooms where horizontal cable pathways need a rigid, full-width support structure between wall-mounted uprights. If you are building out a network infrastructure backbone and need a beam that covers a full standard bay width without a splice, this is the length to spec.
Panduit's Panduit structured cabling hardware line is built for commercial and enterprise environments where cable management hardware is expected to last the life of the installation. The black finish on the CUWBPS24ST02B1 matches standard black rack and enclosure systems, keeping mixed-vendor installations visually consistent without repainting or custom powder coating.
Key Features
- 2400mm Beam Length: Spans approximately 94.5 inches — enough to bridge a full-width wall bay in most commercial head-end rooms without a mid-span splice that would otherwise create a weak point or alignment problem.
- Sold as a Pair: Both beams ship together as a matched set, so you are not sourcing top and bottom rails separately or worrying about finish lot mismatches between two independent orders.
- Black Finish: Coordinates with black rack systems, cable trays, and enclosures standard in security and IT infrastructure environments — no custom finishing required.
- Panduit Commercial-Grade Construction: Panduit wall beam hardware is built for permanent commercial installation, not light-duty residential cable tacking. The beam pair is intended as a structural component of a larger cable management system, not a standalone cable clip.
Integration and Compatibility
The CUWBPS24ST02B1 is part of Panduit's wall-mount infrastructure system. Confirm compatibility with your specific Panduit upright and accessory series before ordering — Panduit's structured cabling hardware uses family-matched mounting geometry. This beam pair is intended for use with compatible Panduit wall-mount uprights; mixing with third-party uprights may result in fitment issues. For network switch and patch panel installations where cable egress needs to be managed horizontally at the wall, this beam length covers wide configurations that shorter beams cannot reach in a single span.
Frequently Asked Questions
Q: What is the span length of the CUWBPS24ST02B1?
A: The CUWBPS24ST02B1 has a beam length of 2400mm, which is approximately 94.5 inches or just under 8 feet.
Q: Does the CUWBPS24ST02B1 come as a single beam or a pair?
A: It is sold as a pair — both wall beams are included in one unit of purchase, so you receive a matched top-and-bottom set.
Q: What finish color is the CUWBPS24ST02B1?
A: Black. This coordinates with standard black rack systems and enclosures commonly used in commercial IT and security infrastructure installations.
Q: What Panduit system does the CUWBPS24ST02B1 belong to?
A: The CUWBPS24ST02B1 is part of Panduit's wall-mount structured cabling infrastructure line. It is designed to work with compatible Panduit wall-mount uprights — confirm your upright series compatibility before ordering.
Q: Is the CUWBPS24ST02B1 suitable for data center or security head-end installations?
A: Yes. The 2400mm length and commercial-grade construction make it appropriate for wide-bay wall-mount runs in data centers, server rooms, and security head-end rooms where full-bay horizontal cable support is needed.
The CUWBPS24ST02B1 is a detail that gets overlooked until someone specs a wall-mount run and realizes their beam only covers two-thirds of the bay. The 2400mm length here is the specific reason to pull this SKU — it bridges a full wide-bay wall installation in a single span, which eliminates the mid-run splice joint that creates alignment headaches and a mechanical weak point over time.
Technical Highlights:
- 2400mm Single-Span Length: At approximately 94.5 inches, this beam covers wide commercial bays in one piece — relevant when your upright spacing pushes past what a 1200mm or 1800mm beam can bridge cleanly.
- Sold as a Matched Pair: Both top and bottom beams ship together, which matters for finish consistency and ensures the horizontal members are from the same manufacturing run — no color variation between rails.
- Black Finish: Matches standard black rack and enclosure systems without any secondary finishing step — a practical consideration when you are mixing Panduit cable management with third-party black enclosures.
Deployment Considerations:
- Verify upright series compatibility before ordering — Panduit's wall-mount hardware uses family-matched geometry, and this beam pair is engineered to seat correctly only with compatible Panduit uprights, not generic wall-mount rails.
- At 2400mm, these beams require adequate wall clearance and two-person handling during installation — plan your head-end room layout before delivery to avoid repositioning fully loaded cable trays.
This beam pair is the right call for wide-bay security head-end rooms and data center wall-mount runs where a single full-span horizontal member is preferable to a spliced short-beam solution.
