Middle Atlantic 20-PK 48in. in. TWIST IEC - IEC-48X20

Middle Atlantic IEC-48X20 48-Inch IEC Power Cord 20-Pack

Overview

The Middle Atlantic IEC-48X20 is a factory pack of 20 blue-stripe IEC power cords, each 48 inches (4 ft / 1.2 m) in length with a NEMA 5-15P plug. Designed for rack-mount AV and security installations where consistent cable dress, easy identification, and bulk procurement matter, these cords ship as a matched set so every cable in a rack row comes from the same spec. The IEC-48X20 (often searched as IEC 48X20) eliminates the sourcing friction of ordering cords one at a time and keeps your project stock organized before the install crew arrives.

These are wire-constructed cords finished with a blue stripe — a practical visual indicator that makes it straightforward to trace power connections in a densely populated rack or PDU strip without pulling every cable. For integrators managing multi-rack deployments in command centers, server closets, or AV control rooms, that color coding is a real time-saver during commissioning and service calls.

Key Features

• 48-Inch (4 ft / 1.2 m) Cord Length: At 4 feet, these cords reach comfortably from a mid-rack PDU to equipment mounted above or below without the excess slack that turns into a cable management problem. Shorter than a 6-ft generic cord, they keep the back of the rack tighter — relevant when you have 20+ devices drawing from a single power strip.
• NEMA 5-15P Plug Type: The 5-15P plug mates with standard 15A North American outlets and PDU receptacles found on virtually every commercial rack power strip. No adapters, no compatibility guesswork — wire it in and move on.
• Blue Stripe Finish: Color-coded power cables are a standard practice in high-density rack environments. Blue stripe lets you visually separate, for example, primary from redundant power circuits, or differentiate power cords by rack zone. This is a functional spec, not cosmetic.
• Pack of 20 Units: The IEC-48X20 ships 20 cords per package, which maps directly to a fully populated 1U 20-outlet PDU or two rows of 10 devices. Ordering by the pack reduces per-unit cost, minimizes separate order lines, and means you have spares on-site for replacements without a reorder.
• Wire Construction: Standard flexible wire construction maintains consistent bend radius through cable trays and around rack edges without the stiffness of heavier-gauge cords that can stress connector ports over time.
• Part of the Middle Atlantic SignalSafe IEC Power Cord Line: Sourced from Middle Atlantic's Middle Atlantic power accessories catalog, these cords are designed to complement Middle Atlantic PDUs and rack systems — so if you're already standardized on that ecosystem, the IEC-48X20 fits without compatibility research.

Integration & Compatibility

The IEC-48X20 is compatible with any IEC C13 inlet device drawing 15A or less on a standard North American 120V circuit — covering the vast majority of network video recorders, managed switches, access control panels, intercom controllers, and AV receivers found in commercial security and AV racks. The 5-15P plug fits any 5-15R receptacle, including the outlets on standard rack power distribution units. If your PDU uses 5-20R receptacles (the wider slot variant), a 5-15P plug will still seat and function — the blade geometry is backward compatible.

For integrators building out rack infrastructure alongside security systems, having a standardized cord length across all devices in a rack simplifies future moves, adds, and changes. When a device gets swapped, the cord stays — no rummaging through a parts bin to find the right length.

Review your power planning and PDU selection guide if you're sizing a new rack build — cord count, length, and amperage all feed into that calculation before you order.

What's in the Box

• 20x Middle Atlantic IEC power cords, 48 in (1.2 m), NEMA 5-15P, blue stripe finish

Frequently Asked Questions

Q: What plug type does the IEC-48X20 use, and what receptacles does it fit?

A: The IEC-48X20 uses a NEMA 5-15P plug, which fits any standard 5-15R receptacle — the type found on the vast majority of rack PDUs and North American 120V wall outlets. It is also backward compatible with 5-20R receptacles.

Q: How long is each cord in the IEC-48X20 pack?

A: Each cord is 48 inches (4 ft / 1.2 m) in length. The pack contains 20 cords, all the same length.

Q: Why are the cords blue stripe — is this just cosmetic?

A: The blue stripe finish serves a functional purpose: color-coded cabling is standard practice in dense rack environments to differentiate power circuits, rack zones, or primary versus redundant feeds at a glance without pulling cables.

Q: Can I use the IEC-48X20 cords with any IEC C13 device, or only Middle Atlantic equipment?

A: These cords work with any IEC C13 inlet device rated for 15A or less on a 120V North American circuit. They are not restricted to Middle Atlantic equipment, though they are designed to complement Middle Atlantic PDUs and rack systems.

Q: What does the IEC-48X20 package weigh, and how many cords are included?

A: The shipping weight of the IEC-48X20 package is 12 lbs (5.4 kg) and includes 20 cords.

Karl Wilson

When I'm specifying rack power for a multi-rack security or AV deployment, cord length discipline is one of the first things I enforce — and that's exactly where the IEC-48X20 earns its place. At 48 inches per cord, you get enough reach for standard rack PDU-to-device runs without the 12 to 18 inches of excess slack that bows out of the back of a rack and turns into a cable management nightmare on a 40-unit build.

Technical Highlights:

• 48-Inch Cord Length: Maps cleanly to PDU-to-device distances in 12U–24U rack sections. Shorter than a typical 6-ft generic cord — less slack, better airflow, tighter dress.
• 5-15P Plug: Universal fit for North American 120V PDUs and receptacles. No adapter chain, no compatibility check needed at the rack — plug in and move on.
• Pack of 20 / 12 lb Shipping Weight: One order line covers a full 20-outlet PDU or two ten-device rack sections. At 12 lbs for 20 cords, these are straightforward to stage and transport to a job site without a separate freight arrangement.

Deployment Considerations:

• The blue stripe is only useful if you're consistent about it — assign it a meaning (primary circuit, a specific rack zone, or a specific voltage rail) before the install starts and document it. Undocumented color coding adds confusion instead of removing it.
• The 5-15P plug is rated for 15A circuits. Verify your PDU outlets and device inlet ratings before wiring — if any device draws more than 15A or your PDU uses only 20A receptacles in a configuration that doesn't support 5-15P blade engagement, these cords are not the right fit.

The IEC-48X20 is the right spec for integrators outfitting a full rack row in one pull — command centers, network closets, and multi-rack AV control rooms where cord standardization and visual circuit ID are worth enforcing from day one rather than retrofitting later.