Middle Atlantic 100-PK 24INCH Stnd IEC - S-IEC-24X100

Middle Atlantic S-IEC-24X100 2 ft IEC Power Cord, 100-Pack

Overview

The Middle Atlantic S-IEC-24X100 is a bulk-packaged IEC power cord designed for structured rack deployments where you need consistent, uniform power connections across multiple devices. At 2 ft (0.6 m), these cords are sized for tight rack environments — long enough to reach adjacent PDU outlets without excess slack that creates cable management headaches. The 100-unit pack format makes the S-IEC-24X100 the practical procurement choice for integrators commissioning full rack builds or facilities managing large equipment rooms.

Explore the full Middle Atlantic power accessories catalog for compatible PDUs, rack enclosures, and cable management solutions. If you're planning a multi-rack deployment, browse power distribution units to pair with these cords, or review our rack infrastructure category for complementary components.

Key Features

• 2 ft (0.6 m) Cord Length: Optimized for within-rack runs between rack-mounted equipment and adjacent PDU outlets. Short cords eliminate the loops and zip-tie bundles that accumulate with standard 6 ft cords — cleaner airflow, faster troubleshooting.
• NEMA 5-15P Plug: Standard North American 3-prong plug mates with the vast majority of rack PDUs without adapters. If your PDUs use twist-lock (L5-15) or IEC C19 receptacles, verify receptacle compatibility before ordering.
• 100-Unit Pack Quantity: Buying in a 100-pack (S-IEC-24X100, often searched as S IEC 24X100) consolidates procurement and reduces per-unit cost on large installs. A full rack of 1U gear typically needs 20–42 cords — a single pack covers two to four racks.
• Wire Construction: Standard wire cord construction — flexible enough for initial cable dress, holds position once routed and managed.

Compatibility

The S-IEC-24X100 cords terminate in a standard IEC C13 connector on the device end and NEMA 5-15P on the supply end — compatible with the IEC C14 inlets found on most 1U and 2U rack servers, switches, NVRs, and Middle Atlantic PDUs. Confirm your equipment uses C13/C14 connections (not C15/C19 for high-temp or high-current loads) before deploying at scale. For PoE network switches or other equipment with non-standard inlet types, check the equipment datasheet first.

Frequently Asked Questions

Q: What plug type does the S-IEC-24X100 use on the wall/PDU end?

A: The S-IEC-24X100 uses a NEMA 5-15P plug — the standard North American 3-prong configuration that fits most rack PDU outlets rated for 15A circuits.

Q: How long is each cord in the S-IEC-24X100 pack?

A: Each cord is 2 ft (0.6 m) — intended for short within-rack runs between equipment and a nearby PDU. If you need longer runs to a wall outlet or remote PDU, a different length is more appropriate.

Q: How many cords are included in one S-IEC-24X100 package?

A: Each package contains 100 cords.

Q: What device-side connector does the S-IEC-24X100 use?

A: The device end uses a standard IEC C13 connector, compatible with IEC C14 inlets on servers, switches, NVRs, and most rack-mount equipment. Verify your gear does not require a C15 (high-temp) or C19 (high-current) connector before ordering.