Middle Atlantic V4017FO 2 In. Radius Internal Elbow Fitting
Overview
The Middle Atlantic V4017FO is a full-capacity internal elbow fitting designed for the Middle Atlantic 4000-series steel raceway and cord cover systems. It provides a 2-inch radius turn at interior corners, allowing cable runs to change direction without sharp bends that can stress conductors or violate minimum bend-radius requirements for structured cabling. The V4017FO ships in ivory to match the 4000-series raceway color family — keeping installations visually consistent in offices, corridors, and commercial AV or cable management environments. TAA-compliant sourcing makes it suitable for federal and government facility deployments where trade compliance is a procurement requirement.
Compatibility
The V4017FO is designed for use with Middle Atlantic's 4000-series full-capacity steel raceway. Verify your raceway series and profile dimensions before ordering — the 4000-series internal elbow is not interchangeable with fittings from the 200, 300, or 700 raceway families. Ivory finish pairs with other 4000-series ivory components including straight sections, couplings, outside elbows, and flat elbows. If your installation uses a white or black raceway variant, confirm the finish code before mixing fittings.
Installation Notes
Internal elbows seat at wall-to-wall inside corners. Route conductors through the elbow before securing raceway sections — pulling cable retroactively through an assembled corner is difficult. The 2-inch radius is the critical spec: it sets the minimum bend radius for cables routed through the turn, which must be verified against the cable manufacturer's specifications for any high-flex, Cat6A, or fiber runs sharing the raceway.
