Panduit UTPSP1BLY Cat 6 UTP Patch Cord - 1 Foot Black

The Panduit TX6 PLUS UTPSP1BLY is a 1-foot Category 6 UTP patch cord engineered for high-density network installations where reliability, performance, and efficient cable management are critical. Constructed with 24 AWG stranded copper conductors and terminated with Panduit's high-performance modular plugs, this patch cord exceeds ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E specifications across the full 1-250 MHz frequency range. RapidID barcode integration enables streamlined port mapping and documentation using Panduit's RapidID software, reducing troubleshooting time in large-scale data center and enterprise network deployments. The tangle-free latch design and slender strain relief boot make this cable ideal for cramped switch cabinets, patch panels, and rack environments where traditional boots snag on adjacent cables.

Key Features

• Exceeds ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E performance standards for all frequencies 1-250 MHz
• 24 AWG stranded copper U/UTP construction with high-performance modular plugs
• Patented tangle-free latch prevents snags during installation and cable moves
• RapidID pre-installed barcodes for automated port mapping and asset tracking
• Slender strain relief boot provides easy access in high-density patching environments
• 100% factory tested for wire map, NEXT, and return loss
• Supports IEEE 802.3af/at/bt PoE (Type 3 and Type 4) applications
• Compatible with 10BASE-T, 100BASE-T, 1000BASE-T, and 10GBASE-T Ethernet over limited distances
• CM (Communications) flame rating for in-wall and plenum-adjacent installations
• Centered de-embedded plug design with integral pair manager ensures consistent performance

Panduit's TX6 PLUS series represents a significant engineering improvement over commodity patch cords. The centered de-embedded plug maintains precise conductor spacing and impedance matching through the termination point, minimizing return loss and crosstalk that can degrade signal integrity in 10GBASE-T and PoE applications. The integral pair manager built into each modular plug maintains the twist ratio of each conductor pair right up to the contact point, a design detail that directly impacts NEXT and FEXT performance at frequencies above 200 MHz. Each cord undergoes 100% factory testing for wire map continuity, near-end crosstalk (NEXT), and return loss - metrics that correlate directly to link uptime and error rates in production networks. The stranded 24 AWG conductor construction provides the flexibility needed for tight bend radii around cable management rings and vertical managers without kinking or conductor damage, while still meeting the electrical performance requirements of the Category 6 specification.

In data center and network operations center (NOC) environments, the tangle-free latch eliminates one of the most common sources of installation delays and accidental disconnects. Traditional snagless boots extend beyond the plug body and catch on adjacent cables when pulled through congested pathways; Panduit's patented low-profile latch sits flush with the plug housing and releases cleanly with a single finger press, even when surrounded by dozens of neighboring cables. The slender strain relief boot tapers to a 5.5mm diameter at the cable entry point, allowing installers to route cables through tight spaces between switch ports and cable management bars where thicker boots create interference. RapidID barcode integration supports automated documentation workflows - scan the barcode during installation, and the RapidID software logs the cable location, length, and color in your asset management database, eliminating manual spreadsheet entry and reducing human error in port identification during troubleshooting.

This patch cord supports IEEE 802.3bt Type 3 and Type 4 Power over Ethernet applications, delivering up to 60W or 100W respectively over all four conductor pairs. The 24 AWG stranded copper construction provides lower DC loop resistance than 26 AWG alternatives, reducing voltage drop and heat buildup when powering high-wattage devices like PTZ cameras, LED lighting controllers, and 802.11ax WiFi 6 access points. Compatible with both T568A and T568B wiring schemes, RoHS compliant, and backed by Panduit's structured cabling warranty when installed as part of a complete TX6 PLUS channel, the UTPSP1BLY delivers the performance consistency and documentation traceability that enterprise IT teams and systems integrators require for mission-critical network infrastructure.