Middle Atlantic 18 Space (31-1/2IN. ) Data Wallrack with Plexi Door Fits 20IN. Deep - DWR-18-26PD

Middle Atlantic DWR-18-26PD 18U Pivoting Data Wall Rack with Plexi Door

Overview

The Middle Atlantic DWR-18-26PD is an 18-space (18 RU) pivoting wall rack engineered for facilities where floor space is at a premium but equipment density isn't. With a 26-inch overall depth (24 inches usable), it accommodates most network switches, NVRs, patch panels, and AV gear without the footprint of a full floor cabinet. Built from steel with a black wrinkle powder coat finish, this is a permanent installation piece — not a temporary rack — rated to 250 lbs UL load capacity and seismically rated at 155 lbs, making it viable in regulated or code-enforced environments.

The DWR-18-26PD (often searched as DWR 18 26PD) ships as a drop-ship item direct from Middle Atlantic's distribution network. TAA compliant with a CSA TAA designation, it qualifies for government and federal procurement programs without additional sourcing documentation. The pivoting mechanism is the key differentiator in this rack family — it swings away from the wall to give rear access without pulling equipment, which matters when you're running structured cabling or troubleshooting active hardware in a tight IDF closet or server room alcove.

Key Features

• 18 RU / 31.5 in Usable Height: Eighteen rack spaces at standard EIA pitch fit a realistic mix of 1U switches, patch panels, and 2–4U NVRs. The 31.5-inch usable interior height matches the advertised 18 RU exactly — no wasted space from internal framing eating into your rack unit count.
• 250 lb UL Load Capacity: That rating means you can load this rack with dense, real hardware — think a fully populated PoE switch, an NVR with drives, and several patch panels — without exceeding the UL-listed structural limit. Don't confuse this with a shelf unit; this is a rated enclosure.
• 26 in Depth / 24 in Usable Depth: Most 1U managed switches and 1–2U NVRs are 17–20 inches deep. The 24-inch usable depth clears those with room for cable management behind the equipment. If you're running deeper servers (28+ inches), verify your specific unit depth before ordering.
• Seismic Load Rating — 155 lbs: The seismic rating matters in California (Title 24) and other code-enforced jurisdictions. At 155 lbs seismic capacity, you can load meaningful hardware while meeting seismic bracing requirements — though you'll need to verify local code for the specific installation height and zone classification.
• Pivoting Forward Rackrail Design: The forward rackrail and pivot mechanism let the entire rack swing out from the wall, exposing the rear of installed equipment. For any install where rear cable access is needed post-commissioning — adding a UPS, rerouting fiber, swapping SFPs — this eliminates the need to physically remove gear to reach the back.
• Plexi Front Door: The included plexi door provides physical security against casual contact while keeping equipment visible without opening the rack. Useful in shared spaces (telecom rooms that double as storage, open-plan IT areas) where you want deterrence without total opacity.
• Steel Construction, Black Wrinkle Powder Coat: The wrinkle finish handles minor contact and tool marks better than smooth powder coat — relevant in active install environments where racks get bumped during neighboring equipment work. Steel construction keeps this in the permanent-mount category; it's not a lightweight sheet-metal knockdown.
• TAA Compliant: Procurement for federal agencies, DoD contractors, and GSA schedule buyers requires TAA-compliant origin. This unit qualifies, sourced from Mexico under NAFTA/USMCA terms that satisfy TAA origin rules.
• Forward Compatible Design: Middle Atlantic's forward-compatible architecture means accessories — shelves, cable managers, blanking panels — from the broader Middle Atlantic rack accessory line integrate without modification.

Integration & Compatibility

The DWR-18-26PD accepts standard EIA 19-inch rack equipment. The 24-inch usable depth accommodates the majority of commercial-grade network video recorders, managed switches, UPS units under 2U, and patch panels without modification. Forward rackrail positioning means equipment mounts flush at the front of the rack, consistent with standard 2-post and 4-post configurations. The forward-compatible design also integrates with Middle Atlantic's rack accessory ecosystem including shelves, lacing bars, and blanking panels.

At 99.08 lbs unloaded (135.58 lbs shipping weight), wall-mounting requires proper structural backing — blocking between studs or direct attachment to masonry. The pivot mechanism adds lateral load on the wall anchor points; consult the installation guide for anchor specifications before mounting, particularly if the rack will carry loads approaching the 250 lb UL rating.

Frequently Asked Questions

Q: What is the usable rack depth inside the DWR-18-26PD?

A: The usable depth is 24 inches (61 cm), with the overall enclosure depth at 26 inches (66 cm). This accommodates standard 1U–4U commercial equipment up to approximately 20–22 inches deep with room for rear cable management.

Q: Is the DWR-18-26PD TAA compliant for government procurement?

A: Yes. The DWR-18-26PD carries a TAA/CSA TAA designation and is manufactured in Mexico, which qualifies under Trade Agreements Act origin rules for federal and GSA procurement.

Q: What is the UL-rated load capacity of the DWR-18-26PD?

A: The UL load capacity is 250 lbs (113.4 kg). The seismic load capacity is separately rated at 155 lbs (70.3 kg) for installations in seismically regulated environments.

Q: Does the pivoting wall rack require special wall anchoring?

A: Yes. At 99.08 lbs unloaded and rated to 250 lbs loaded, the DWR-18-26PD requires secure attachment to structural backing — wall studs with blocking, or direct masonry anchoring. The pivot mechanism applies lateral loads on anchor points; consult Middle Atlantic's installation documentation for anchor hardware specifications.

Q: Can the DWR-18-26PD be shipped internationally?

A: Yes. Middle Atlantic lists the DWR-18-26PD as available internationally. Note that this product is drop-ship only from the manufacturer's distribution network.

Q: What type of front door does the DWR-18-26PD include?

A: The DWR-18-26PD ships with a plexi (clear acrylic) front door, which provides physical access deterrence while keeping installed equipment visible without opening the enclosure.