ACTi DV-13524-PLUS 135IN Direct View LED Wall
Overview
The ACTi DV-13524-PLUS is a 135-inch direct-view LED wall all-in-one display system built for surveillance command centers, control rooms, and security operations centers where real-time multi-camera monitoring requires a large-format, high-brightness visual surface. Direct-view LED (as opposed to LCD or projection) delivers pixel-level brightness and contrast uniformity across the full display surface — critical when operators need to spot activity in both bright and dark zones of the same multi-camera wall in daylight or 24/7 operations. The 135-inch diagonal format balances visibility range (operator can read detail from control-room distances) with installation footprint and power budget.
Compatibility
The DV-13524-PLUS integrates with standard surveillance video management systems (VMS) platforms via HDMI, DisplayPort, or network input depending on your control system architecture. Direct-view LED walls of this scale typically support multiple input sources simultaneously, allowing parallel feeds from IP camera VMS servers, DVRs, NVRs, and external monitoring feeds. Confirm your facility's video distribution infrastructure (routing, switching, bandwidth) and display control protocol before specifying — some installations pair LED walls with matrix video switches (HDMI matrix or IP-based KVM systems) to distribute camera streams dynamically to the display wall.
Installation Notes
135-inch LED walls are structural installations. Plan for: (1) wall-mounted or free-standing frame assembly requiring a dedicated structural support engineer to verify floor or wall load capacity (LED walls of this size weigh several thousand pounds). (2) AC power distribution — direct-view LED walls draw significant sustained current; verify dedicated 20+ amp circuits and UPS backup if uptime is critical. (3) cooling and ventilation around the display cabinet to manage heat dissipation during 24/7 operation. (4) input cabling runs (HDMI, DisplayPort, or network trunk) routed through conduit to the display control input panel. (5) network connectivity for firmware updates and remote management (if supported by the ACTi control interface).
